Result: parallel kit

They said a hand squeeze pop rivet gun will not be strong enough and that you will need to at minimum use a scissor rivet tool. | Quick question, it says a rivet gun is required....

However, you do want to be close to the edge because that is the strongest support so close but not in the channel is ideal. A small hand rivet tool is not recommended but a concertina (accordion style) hand rivet tool is a pneumatic rivet gun is perfect for this application and the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 is designed to be used with these tracks. |

Using a normal hand rivet gun may not provide enough force to secure the rivets and that would mean removal of the rivets by drilling them out and replacing them. | The install...

Another option is to use some blue Loctite # LT37643 which will prevent the bolts from backing out and still allow you to remove the bolts using hand tools should the need arise. | the bolts on one side are...

When installing the B&W Custom Base Rails and Installation Kit # BWRVK2401 on your 2011 Ford F-250, you will want to have the following items on hand: Impact wrench or ratchet with 15/16 inch and 3/4 inch sockets 15/16 inch and 3/4 inch box end wrench A drill and 1/8 inch and 9/16 inch drill bits Along with these particular tools, you will want a hammer, flashlight, tape measure, eye protection, torque wrench and a center punch. |

To complete the installation you will want to have an 8mm and 18mm socket, Ratchet wrench, torque wrench, 8" socket extension, prying tool, a pair of sheers or cut off tool to trim the rear bumper fascia, and a rivet gun to reinstall the bumper fascia. |

All you need other than this kit is the basic hand tools for the install which include 13 mm socket and wrench, a ratchet and a torque wrench. | I was wondering if this product...