Should I Use Timbren Or SumoSprings Suspension Enhancement On My 2013 Ford F-250 4X4?
Hello, I have a 2013 F250 4x4 and tow regularly both bumper pull and gooseneck utility trailers. But drive the truck a lot unloaded too. It looks like the Sumo springs are always in contact with the axle which I would guess adds stiffness to...
Where Does Ball Hole Get Drilled in 2005 F250 Super Duty Short Bed Truck
Good Morning, what is the measurement for the 4inch hole in a 82inch short bed 2005 F250 Super Duty Crew Cab/4door? Thanks | For the short bed 2005 Ford F-250 the center of the hitch ball hole when you install the Curt hitch # C60720 will...
Recommended Air Helper Spring Kit For 2007 Ford F-250 With B&W Turnoverball Gooseneck Hitch
I have 2007 Ford F-250 crew cab 6 3/4 bed 4x4 I would like to know what products will work i will be installing a bandw gooseneck hitch and I want to install air bags to | For your 2007 Ford F-250 Crew Cab 4x4 with the 6-3/4' Bed I recommend...
Replacement Safety Chain Loops for a B&W Turnoverball Gooseneck Hitch on 2008 Ford F-350
Will these work for 08 ford 1 ton bandw turnover gooseneck hitch? | Yes, the B&W Replacement Safety Chain U-Bolt Kit, # BW1900-2-1600, will fit the B&W Turnoverball Gooseneck hitch on your 2008 Ford F-350. |
Recommended Fifth Wheel Hitch And Installation Kit For 1999 Ford F-350
Good morning!! I have a 2012 Heartland Elkridge 5th Wheel trailer 36QBCK Dry weight is 11,609 GWR is 1,500/6804, the truck that I will be pulling with is a 1999 F350 Dulley 7.3 shortbed, I was wondering if you could help me out with what the...
Fit of Firestone Ride-Rite Air Helper Springs with B&W Turnover Ball Hitch on 2008 Ford F250
I have a was wanting to know if Firestone f2550 will fit on my truck with the BandW turnover ball. 2008 ford ft 250 crew cab 4x4. Thanks | The Firestone Ride-Rite # F2550 is compatible with fifth wheel or gooseneck hitches, including your B...
How to Choose Correct Bearing Buddies for Trailer Hub
I need to know how to be sure and order the correct Bearing Buddy. What and how to measure for the correct one. | You'll want to choose a Bearing Buddy based on the inside diameter of the bore of your hub. You can use a digital caliper to determine...
Connecting Stowmaster Tow Bar # RM-501 to Steel Bumper on Jeep Wrangler
I picked up a Stowmaster 5000, however the base plates that need bolted to the jeep wrangler front steel bumper were not included. I see that you sell kits which are two part left and right side. With what I have, I only need the pieces that...
Are Fit Exclusions for Super Springs # SSA15 Leaf Spring Kit Noted on Website
Other retail sellers ask the question do you have factory overload springsinch I do not see that option on your order page. If you do not have factory overload springs the kit comes with an adapter plate. | We do note any fit exclusions for...
Will the Curt Custom Fifth Wheel Installation Kit # C16448-204 Work with Reese 16k Hitch
Will these rails work with a 16k Reese hitch? | Yes, the Curt Custom Fifth Wheel Installation Kit # C16448-204 that you referenced includes rails built to the industry standard dimensions so your Reese 16k hitch would work well with them. |
Does Reese Make the Ford Hitch Prep Fifth Wheel Rails
Have you heard any difference between the factory under bed rail system and the Reese after market kit. I have a customer that says our locking bolts on the Curt 16017 do not fit the Reese system | Reese Elite underbed rails and the Ford hitch...
Lippert Electric Landing Gear that Fits 2007 Keystone Hornet 295BHS
Will these fit in the original brackets and are they strong enough for my camper?2007 Keystone Hornet 295BHS | Your Keystone Hornet 295BHS has the correct brackets for the Lippert Electric Landing Gear Jack # LC333964 to attach to. These have...
Does the Airraid Cold Air Intake Come with a Smog Sticker that Shows it is CARB Compliant?
Does the unit come with a sticker that states that it is CARB compliant or do you have to prove it to the smog checker? | Yes, I confirmed with Airraid that the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter AR401-226 comes with...
Do the Husky Fifth Wheel Rails and Installation Kit # HT31563-686 Require Drilling into Truck Frame
does this kit require drilling thru side of frame or do brackets line up with factory holes? thanks, kit HT31563-686. Truck is a 2013 ford f250 crew cab short bed. | The Husky Custom Base Rail Kit # HT31408-686 will install using the existing...
Did Ford Factory 5th Wheel Prep Package Come on the F-250s or Short Bed Trucks
Did the Ford 5th wheel hitch prep come in the F250, also, and how about the short bed? | The factory underbed prep package was available on the F-250 and F-350 but only on the long beds. The aftermarket kit, # RP30126, can be installed on the...
Transmission Cooler for a 2001 Ford F-350 Super Duty
I have a 2001 f350 super duty 4x4, question is if all your transmission cooler will work ? I know sometimes 2w and 4x4 transmission . Thaks | You can use any transmission cooler on any automatic transmission whether it is 2 wheel drive, 4 wheel...
Installation Instructions for Titan Tire Chains # TC2228CAM
How do I install my snow chains | I have the following installation instructions for Titan tire chains # TC2228CAM: Prior to use pre-fit tire chains to vehicle tires INSTALLATION INSTRUCTIONS Caution! Install tire chains in a safe place....
Installing Fifth Wheel Hitch Bed Rails in Truck with Bed Liner
my 2010 f-250 8 foot bed has a bed liner, do I need longer bolts so i dont have to cut or remove the liner? | If your bed liner is the spray-in type, you can simply install the fifth wheel hitch rails directly on top of it. However, if your...
After Installing In-Bed 5th Wheel/Gooseneck Trailer Connector, Only Running Lights are Working
i have a 2003 f250.i installed this kit very simple which was great.i hooked up my new big tex gooseneck trailer and the only lights working were the running lights,i have no brakes or turn signals.....any ideas | You will have to make sure...
5th Wheel Trailer Hitch Installation Kit and Wiring for a 1999 Ford F-250
I need to install the rails that will fit my older Fifth Wheel Drawtite Slider hitch. My truck is a 1999 Ford F250 Super Duty Extended Cab 4 door pickup, V10. What rail kit would you recommend ? The least amount of drilling the better. Also...
Weight Capacity of Curt Class V 2-1/2 Inch Hitch Receiver, Part # C15810
I wanted to check on the weight capacity of this hitch. It seems to me as I read that it lists the weight carrying capacity and the weight distribution capacity as the same 20,000 lbs. Is that correct? Im looking to up the receiver capacity...
Rear Suspension Enhancement For a 2000 Ford Super Duty With a Gooseneck Hitch
Will this product work with a gooseneck hitch and what is a good air compressor kit for this product | The Air Lift LoadLifter 5000, # AL57298, was designed to work with specific gooseneck hitches because it installs on the outboard side of...
Where is the OEM Brake Controller Port on a 2001 Ford F350 SD
I cant find the brake controller port on my 2001 F350 SD with the towing package. I found a flat six pin plug with four wires connected, but this looks wrong for the diagram of the 3035 adapter | To access the OEM plug, look near the diagnostic...
Trailer Hitch for a 2006 Keystone Raptor 3319 5th Wheel Trailer
Do you have a hitch kit I can install on my 2006 Keystone Raptor 3319 5th wheel that will pull a 4300 lb 2015 Wrangler, or do I have to have someone fabricate it for me? Is it even possible? | We have trailer hitches that would likely fit your...
Filter Your Search
Contact and Help