!mercury  x   >   !500 Classic  x   >   Kodiak  x   >  

At one time, in your literature, I saw the torque setting for the stainless steel bolts that hold the Kodiak #KDBC250E caliper to the brake assembly. I cant find the setting now. What is the torque setting? | The Kodiak Disc Brake Caliper part...

I have a ’89 / ‘90 dual axle EZLoader boat trailer with hydraulic drum surge brakes. 3500 lbs axles 5 lug bolts. The brake lines are rusted, and so are the bleeder screws. Which kit do you recommend, and do you have the appropriate bleeder screws?...

Can you get this with oil hubs? HydraStar Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13 Hub/Rotor - 8 on 6-1/2 - 7K Item # HSE7K-TR1 Thanks | We do have a way for you to use the HydraStar electric-over-hydraulic actuator for disc...

Do you sell a HydraStar tandem axle complete disc brake kit for 7000# axle with 9/16inch studs? I see the triple axle version. I dont need that many spare parts. : | I would be happy to piece a kit together for you, but we do not currently...

Item # K2HR10A11RERR is this for 10000 axle double wheel or single wheel | The Kodiak Disc Brake Kit # K2HR10A11RERR can be used in dually and single rear wheel applications actually. It is compatible with 16 inch dually wheel setups and 17-1/2...

need replacement disk brakes for 2004/2005 fourwinds 2 axle trailer 2x3500lb. Looks like a 10-inch disk, the studs are in the hub, not the disk. Need calipers, disks and pads, so maybe just a completely new setup. Surge brakes, hydraulics....

Can I purchase additional lubricant for my kodiak 3500 lb oil bath conversion? | Yes, we do offer the oil from the kit part # XLPROLUBE1980KIT separately with the part # XLPROLUBE. |

How can i convert standard hubs on 7k axles to oil bath hubs | Initially what you need to do is clean out all of the grease in your hub, on/in the bearings, and on the spindle. Once that is done you simply swap out the grease seal for the oil...

I need help picking the correct disc brakes and rotors. Rotor measures 9-3/4inch 5 lug 4.5 bolt pattern Will 10inch work? I will also need bearings and seal for all 4 Thank You | Based on the corrosion I see on the parts I recommend the...

Can I go from 205/75R15 to 225/75R15 on my boat trailer? I want tires and rims, dont want to mount 225 tires on 205 rims. | Yes, so long as you have the needed clearance, you can certainly upgrade the tires on your boat trailer from 205/75R15...

I am looking for a wheel stud for a freedom axle. It is a 1/2x20 2 inch long with a spline diameter of.561. Would you have anything that would word? Thanks. | The closest thing we have to what you're needing is the Kodiak Wheel Bolt # K12WB2...

I bought a momentum toy hauler. It has the Hydrastar 3 axle disc brake conversion setup. What/where can I get brake pads replacements? | You can use the Kodiak Ceramic Brake Pads # K250CP-SS to replace the worn pads on your Hydrastar Disc Brake...

Replacement oil cap and oil? | The replacement oil cap and oil for the 10K Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 # KD94FR are as follows: - Replacement Oil Cap # RG04-300 - Kodiak Synthetic Bearing Oil # XLPROLUBE |

I have a Holsclaw boat trailer and need a disc brake conversation kit. The axles have 4 bolt plates. Would you also have a brake line/hose kit? Both the inner and outer bearings are L44643. Thanks | Thanks for the additional information! We...

What size is the knurl end of the studs. I need to replace all studs due to corrosion. | Titan Disc Brake Kit # T4843800 takes a 1/2" drive-in wheel stud. Titan does not list a specific replacement but we have some options from Kodiak. The...

After converting to the oil bath how often do you need to change the oil and or open the hubs and inspect the bearings? Also is there an alternate oil to use from Amsoil? Thanks | The common recommendation with oil bath hubs is to not mess...

I am currently in the process of purchasing a Grand Design Momentum 398MR triple axle trailer. It currently has 7,000lb axles. I would like to add independent suspension to it and upgrade the axles to 9,000lbs with oil bathed bearings, plus...

Im am trying to find the correct caliper for my boat trailer left hand side 10 inch | It sounds like you are looking for a replacement caliper for your Kodiak Disc brakes with a 10" rotor like the Kodiak Disc Brake Kit # K2R35S. Depending on...

Is the Kodiak Hydraulic Brake Line Kit compatible with a Titan/Dexter M10 Brake Actuator? | Yes, the Kodiak Hydraulic Brake Line Kit # 15SI-BLKIT is compatible with the Titan/Dexter model 10 Surge Brake Actuators for Drum # T2478100 or Disc...

Grand design 2022 reflection 226rk. Im relacing all 24 lug nuts. Looking for solid stainless steel, so that I can Remove them with a impact wrench. 1/2x20, 3/4 hex, 1.38 tall, 1-9/16 over all length. Im looking at DEEMAXX DE93GR.. | The DeeMaxx...

Will the deemax calipers DE86VR work as a replacement for Tie Down Engineering 46304 calipers? Thanks | The DeeMaxx item # DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering...

Hello, I am looking for a threaded in hub cap for oil bath Reliable brand 6 lug hub. originals were plastic, I believe replacements are now aluminum. I can find the one for 5 lug but need one for 6 lug. this is on a 2005 Mastercraft boat trailer...

Hi! Ive got a marine trailer with tandem Lippert 3000 lb axles part 232310. Can electric over hydraulic brakes be added to one of these axles? Thanks! | Yes you can convert your Lippert 3,000 lb trailer axles to electric over hydraulic with...

I want to retrofit my 2013 Heartland Sundance fifth wheel with these disc brakes. I was told when I purchased the RV that it came with 7K axles. I got under the trailer and found the label on the axle tubes. They are marked 6000# Lippert...