View Motorhome  x   >   Pinto  x   >   Hopkins  x   >   Cherokee  x   >  

I want to flat tow my 2019 Jeep Cherokee behind my 2019 Forest River Forester. I have a Blue Ox tow bar BX7435 and safety cables so my thought is that I should use the Blue Ox BX1143 base plate. Does that seem correct or is there a better option? I...

I am looking for a light adapter/splitter. The back of my RV has a 7 pole plug for trailer usage. But my dolly is a 4 flat for the dolly lights. I see that I can buy a 7pole to 4flat adapter, but I would like to put lights on the rear of...

Hello, I have a 1995 Jeep Cherokee with the plug from part # 118330 so its a flat 4 pole connector. I want to be able to connect a battery to a trailer I have also flat 4 connector I want to go with the 7 way round plug is there an adapter...

I have a 2000 Jeep Cherokee I need to wire for my 98 Dutchmen Popup camper. I was looking to purchase harness 118354 but noticed that my camper has a connector like PK12706. How would I convert to the 7 pole with that harness? Thanks | First...

I am installing a Demco Stay in Play Duo break system that I just bought from you. It is going on my 2018 Jeep Cherokee Trailhawk. The Demco break away isnt going to fit without a lot of work, so I want to use the Hopkins breakaway that is...

I recently installed a Hopkins trailer light kit. When it is plugged in to the trailer my car says the blinkers are out and none of the lights work the Jeep or trailer. My question is does this product work with the computer system to not trick...

Hello, I am looking for this product: HM42635 But one that fits my 2015 jeep Cherokee. This one has different wire adapters than what I am looking for. I can send you pictures of what my adapters look like if that is helpful. I just need an...

Im looking to install electric brakes on my trailer and brake controller in my vehicle. Vehicle: 1998 Jeep Cherokee has 4 pin connector Trailer: Aluma 7712H with factory axles Aluma says 3500 lb rated at 2990 lb EZ lube. Axle has 4 hole square...

I had the harness kit installed in my Jeep so I could flat tow the vehicle behind my RV. On my first trip, I plugged in my brake system into the cigarette lighter of the jeep. When we got to our destination, the battery was drained. Since...

I have a 2000 Jeep Cherokee. I installed your T-Connector wiring pkg for the lights flat 4-wire. Tent trailer Im buying has a round, 7-pin? connector that was used with a P/U truck rig. Does your ETBC7 wiring kit adapter work in this situation...

I have installed the factory hitch and was looking to use the HM11142464 wiring harness and somehow tie it in to the OEM 7- and 4-Pole Trailer Connector Socket. What and how would I go about doing this? | The Hopkins Plug-In Simple Vehicle Wiring...

Do i need the Mopar wiring kit for my 2019 jeep Cherokee trailhawk elite. The owners manual says I do but many people say its no longer necessary on the 2019. | You do not need the Mopar tow bar wiring harness anymore for the 2019 Jeep Cherokees...

Hello! I have a question about part number 18159, the 7 way box mount, and part number HM40975, the 7/4 pin combo connection. I have a 2000 Jeep Cherokee XJ that the OEM hitch has rusted pretty badly inside, its time for a replacement. I am...

Question: Every site I have read says jeep gc v6 engine has a rating of like 6200 lbs towing properly equipped tow package but I cant find the tow capacity with out the factory tow packagae Expert Reply: I referred to the 2015 Jeep Grand Cherokee...

looking to use Hopkins Custom Tail Light Wiring Kit for Towed Vehicles Item # HM56208 on my 2017 Cherokee Trailhawk. Will be using REady Brute Elite II with mechanical braking system to press brake pedal in Jeep. The brake lights dont come...

Hi, I have a Roadmaster Eagle 8000 towbar on my RV and would like to use it to tow my new to me 2014 Jeep Cherokee. I was going to order baseplates RM-521447-4, the Demco braking system SM99251, a brake light relay kit RM-88400, and the Hopkins...

Does the 2017 Jeep Cherokee Trailhawlk 4 wheel drive require Mopar part 68321424AB to be flat towed? | Although Jeep corrected the problem beginning with the 2019 model, the 2017 Jeep Cherokee Trailhawk will indeed need the Mopar 68321424AB...

WHERE CAN A CUSTOMER FIND A WIRING KIT TO SET UP THE BRAKE LIGHTS WHEN THEY ARE FLAT TOWING THEIR 2017 JEEP CHEROKEE. I HAVE SERCHED HIGH AND LOW SND NOW ONE CAN ACTUALLY ANWSER THIS WUESTION FOR ME. | For a flat towing install harness that...

The instruction sheet shows a breakaway switch and either a 4 pin or 6 pin connector. are thiese included with the parts package? I can see the pictures but the parts are not number in accordance with the Installation Insturctions so I have...

I installed this kit today. I watched my son pull away. Brake lights lit all the time, and when he hit the brakes, the turn signals light up. He does have led bulbs in his Jeep. Will this affect the harness? Did I just waste money buying this...

My 2008 Winnebago View has a 6 pin traliler connector on the back. Can I use a 6 to 7 way adapter with the C51180? | You could indeed use an adapter like the Hopkins 6-way to 7-way adapter, part # 47435. Keep in mind, there are two accepted...

2017 Jeep Cherolee flat tow behind diesel motorhome. need wire harness to active tail lights. will item #118605 work for this application. If not what will?? | I do have an option for you but the T-One Vehicle Wiring Harness with 4-Pole Flat...

I have a Rockwood Freedom pop up with a square plug that has 3 male prongs at the top and the bottom going from left to right is a female x blank x male. Is this considered a six way plug. The kits I have seen that custom fit my jeep show...

So this will give me a 4 pin FLAt. ? | Yes, the Hopkins Plug-In Simple Vehicle Wiring Harness # HM42465 referenced in your question, which is confirmed to fit your 2000 Jeep Cherokee, will provide you with a 4-Way flat connector. This will connect...