View Motorhome  x   >   !Prism Motorhome  x   >   etrailer  x   >   Frontier  x   >  

Have installed 4-way in my 2008 Frontier using OME from Nissan with relays what do I need to add a 7-way plug will I keep the 4-way or does the 7-way use the plug in that the 4-way uses I noticed the 7-way has an extra wire Any information is...

I have a nissian frontier 2014 cred with 6. I installed a hitch from you last year and a 4 pin trailer connection. Now I need to find a 4 pin to 7 pin travel trailer connection/conversion and an electronic trailer brake. I was looking at theC51110,...

Just wondering what additional wiring harness or relay would bee needed to properly install. What about a brake controller? Basically I just want to ensure I get everything I am going to need been over 15 years since I have installed a hitch.....

My 22 Nissan frontier does not have the plug behind that right foot panel | Sometimes you have to dig pretty far to find the connector behind the right kick panel of your 2022 Nissan Frontier to be able to install the Curt kit part # C56225...

Hi, I have a 2011 Nissan Frontier without any factory-installed tow package as far as I can tell. Will this 118266 adapter work for that, and in addition to the hitch, what else do I need? A pin? a mounting bracket for the 7-pin adapter?...

I have a 2015 Nissan Frontier Pro4X that is rated at 6500lb towing capacity and hitch weight is rated at, I believe 610lbs. I have a 29foot camper that is rated at 5168uvw and hitch weight at 555lbs. The camper loaded weight capability is...

hi I need a vehicle side connector for a round pin 7 way any ideas ? | If you only need the vehicle side 7-Way round pin connector and already have all the wiring to attach to it on your tow vehicle you can use connector # PK11720. If...

I want to tow an inTech Explore with a Tesla Model Y. The weight in within range but the tongue weight is possibly over. I could consider the inTech Pursue. With either of these would a WDH help, and do I need trailer brakes connected to the...

I am planning on buying a 2018 Winnebago View and want to carry 2 hybrid bicycles and a Vespa 150 cc scooter. Do you have a combo hitch option? I would need a ramp to load the Vespa which weighs about 250 pounds. Thanks! | For your 2018 Winnebago...

I have a 2013 Nissan Frontier 4x4 4 door and a 16 foot canoe. I live in Virginia and frequently travel to Michigan and Florida, and would love to take my own canoe instead of always renting one. | We can help you with canoe carrier options for...

I’m refurbishing my boat trailer. I can see that the leaf springs are the open eye type at one end. I was wondering if I can use double eye leaf springs instead of the open eye type if the measurement matches a double eye spring. Is this advisable?...

How much is just a bolt kit for a 2018 Nissan Frontier? Thanks! | For the trailer hitch from Draw Tite part # 75282 which fits your 2018 Nissan Frontier we have the replacement hardware kit part # RHK which the price is available down below....

I have a bed extender that is used to lift the Kayak over the truck bed. So one end of the kayak is on the roof rack of the truck and the on the bed extender. The bar on the bed extender is square and about 2inch all around 2x2x2x2 but I cant...

I need 2 sets of wheel bearings, races and seals. They are on a 4 lug trailer axle and same size inside and out. numbers on one wheel bearing is Poland H12 FLT-8 L44849 | For your wheel bearing, races, and seals, I don't have the dimensions...

Trying to plug this part into my 04 Frontier crew cab 2wd. Cant seem to find where to plug it in to. Ive looked under the drivers dash, but have not found a plug. Where do this plug into? Thanks. | From what I was able to learn, the connection...

What is the difference between the akebrk-35r and the akebrk-35r-sa brake plate assembly, trying to determine will one of these will work with the Dexter 8-147 hub , need to also know does the center hole of the brake plate measure 3 inches...

Regarding Equalizer hitch 90-00-0400. Equalizer web site specs say that this requires a 2 5/16-inch ball yet your product comes with a 2 inch ball? Is this correct? We need a 2 5/16 inch ball on this hitch. | Equal-i-zer weight distribution...

Hello, I have a 2008 Nissan frontier. When I purchased truck had no hitch or anything. Since then I have had hitch installed and I installed the wiring kit 118525 from you guys a while back. I now need to upgrade to a 7 way with a brake controller....

I own a 2011 Nissan Frontier pro4x I will be towing around 3-4500 pound car with trailer. Trailer has trailer brakes. I do not have a factory hitch ect, but I did have a company near my house install hitch and light are wired to a 7 pin plug....

Nissan Frontier, trailer hitch does it come with wiring harness? | The trailer hitches that we carry, including Curt hitch # 13241 for the 2013 Nissan Frontier, do not include a trailer wiring harness. The reason for this is that many vehicles...

Does this toe package mount to the top or bottom of the frame? | The Curt Class III trailer hitch you referenced, part # 13241 bolts to the underside of the truck's frame, as shown in the instructions I've linked for you. I've also linked you...

2001 frontier | If you are asking about a trailer hitch that fits a 2001 Nissan Frontier, the Draw-Tite Trailer Hitch # 75186 is a great option. It is a fit for a 2001 Frontier Crew Cab, King Cab and Regular Cab; it has a 2 inch receiver, a...

need a trailer hitch, the connector for lights, the whole package for towing with my 16 frontier. | I will be glad to make some recommendations for your 2016 Nissan Frontier. Starting wit ha trailer hitch # 13241 is an excellent option and the...

my new Frontier did not come with a trailer hitch. wanted to know what you recommend for towing a light trailer with an atv. will one hitch tow/fit better than the others available? | The etrailer Trailer Hitch Receiver part # e98869 that you...