2008 Winnebago View Screen Door Latch Right Hand Side
Hi, I need a new screen door latch for my 2008 Winnebago View. It is a right handle. Can you please let me know which one? | For a Lippert Right Hand RV entry screen door latch you'd need the part # LC201471 which matches what your Winnebago...
Determining Which Trailer Hitch Receiver Will Fit A 1966 Chevrolet P10 Panel Truck
Hi, I am looking for a trailer hitch for my 1966 Chevy Panel Truck P10 it has the same wheel base as a 1966 Chevy short bed C-10 pickup truck. My question is will the hitch for pickup truck work on my truck without any modifications? ...
Does Pace Edwards JackRabbit Fit 1970 Chevy C10 Short Bed
Looking for a retractable bed cover for a 1970 c10 SWB. Has the 6.5 bed. Never liked the hinged covers and would like to make sure that before spending this kind of money it is the right one. | Yes, the Pace Edwards JackRabbit part # 311-JRC1329...
Determining The Correct Adjustable-Fit Trailer Hitch For A 1996 Chevy G-30 RV
Hello. I have a 1996 Chevrolet G-30 RV. I’m looking to upgrade the trailer hitch to one that’s rated for at least 7500 lbs. Currently it has a Reese 36041 which is only rated for 3500lbs. Thank you. | There are weld-on adjustable-fit options...
Recommended Motorhome Capable E-Bike Rack w/ a Loading Ramp
The HLY64FR bike rack is rated for use on back of a motor home or 5th wheel. Is there a rack that is similarly rated but also has a ramp that can be used for these heavier E bikes? So far the only one that has a ramp is not rated for motor...
B&W Gooseneck & 5TH Wheel Hitch For a 1996 GMC C/K Pickup With Long Bed
Does the BWRVk3500 work with Curt c60713 gooseneck hitch | The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500 can only be used with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1000 on your 1996 GMC C/K...
Frame Bracket Dimensions for B&W Turnoverball Underbed Gooseneck Trailer Hitch BWGNRK1000
What are the length and width of the rails that run down the frame of the vehicle? | The frame brackets that come with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1000 measure 28" long x 2-3/4" according to B&W. |
Installation Kit for Bulldog Gooseneck Hitch on a 1990 Chevy C/K 2500 Series Pickup
Will this kit work with a Bulldog gooseneck hitch part # 947533 on a 1990 chevy 2500 long bed? | The installation kit you will need for Bulldog gooseneck hitch 947533 and your 1990 Chevy 2500 pickup is # 4440. The one you asked about, 4454,...
Are the Round Tube Spacers Needed to Install Curt Universal 5th Wheel Kit on a 1998 Chevy Truck
Where Will this round tube go part number cm-16100-ts Im install this c16200 kit in a 98 chevy pick up? or maybe dont need on this application. | The tube spacers that are included with Curt 5th wheel installation kit # C16200 are only used...
Will Furrion Vision S Camera Work on 2021 Winnebago Motorhome on Sprinter Chassis
I have a 2021 Winnebago View and want to put a camera in the back so I can constantly view my tow vehicle. I was looking at this camera. Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5 Screen - FOS05TASF...
Bolt Kit for Attaching Hitch to Chevy C/K Pickup With 8 Bed & Standard Bumper
Do yall sell a bolt kit to attach the trailer hitch to the truck? I am getting a trailer hitch from a friend and need the bolts for mounting or could I use some purchased locally | To receive replacement hardware your hitch just order etrailer...
7-Way and Brake Controller Recommendation for a 1985 Chevrolet Silverado K10
Hello What products do I need for a 1985 Chevy Silverado k10 ? Looking for a electric brakes for a 7 pin | It sounds like you're needing to add a 7-way to your truck so you can use a brake controller. To start, you're going to need add a 4...
Replacement Rear Bumper Recommendation for 1992 GMC C/K 1500
Would this bumper fit my 1992 GMC Sierra 1500 single can? | I attached a link to a page that has all of the bumpers we offer that do fit your 1992 GMC C/K 1500 but the part # 61001 that you referenced does not fit it. The most similar bumper...
Installation of Wiring Harnesses on 2-Wire Systems That Can Also Work With 3-Wire Systems
i purchased 2 modulites. 1 for car and hvy duty for truck. They had a few different components. when i click on the instructions for install some components have chance to the lighter duty and the instruction do not apply. If so I would have...
Does The Fastway WD System # EQ91-00-6100 Use Grip Tape Between The Bars And Brackets?
I have the e2 round bar 8000lb. Its 3 years old and the friction tape on what ever it is is completely gone off the bars and brackets from my last camping trip. Do you offer replacement grip or what can I use to replace it? | The Fastway e2...
Fit of B & W Heavy Duty Class V Hitch Part # BWHDRH25124 on 1998 GMC C/K Series Truck
Is this the correct hitch for a 1998 GMC 2500 4x4 regular cab with the factory step bumper? | The B & W Heavy Duty Trailer Hitch Receiver you referred to, part # BWHDRH25124 is indeed a fit for your 1998 GMC 2500 C/K series pickup. It is compatible...
Parts Needed to Install a P3 Brake Controller in a 1999 Chevy K Series Pickup Truck
Using the 90195 brake controller, will the 3025-P adapter work with this controller also? i have a 1999 chevy pickup K series. | The 1999 GM trucks were part of a split model year. Some still had the C or K designation like yours and others...
Is Reese Replacement 16K Head Compatible with Reese Part # 30048
I have a Reese 30048 Kwik Slide with a 30049 head. The unit has been discontinued. I want to know if I can use the 30048 Kwik Slide with the 58165 replacement head. The rails and Kwik Slide unit are already installed in my truck but the 30049...
Does Spare Tire Have To Be Relocated When Installing Hitch On 1998 Chevrolet C/K Pickup
Do these hitchs retain stock spare tire location? 1998 Chevrolet C/K Series Pickup Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2 Draw-Tite Trailer Hitch 41938 1998 Chevrolet C/K Series Pickup Curt Trailer Hitch Receiver Class...
Spare Tire Compatible High Capacity Hitch for 1996 GMC K1500
I have a1996 GMC K1500 extended cab short bed 4wd standard step bumper. I would like to use a 10,000 pound rated hitch or higher and still be able to leave my spare in the original place. My spare is the factory 265/75/16. I have looked at different...
Recommended Air Helper Springs for a 1994 Chevrolet C/K Pickup 3500
Hi, I have Chevrolet C3500 dually 1994 year Im looking for it air ride kit with maximum load weight, What can you advise me as an expert? Thank you for help. | For air helper springs to use on your 1994 Chevrolet C/K Series Pickup 3500, I recommend...
Recommended Ladder Rack for 1976 Chevrolet C10
Hi i have a Chevrolet Pick up C10, and im not shure wich size of the race should take. the bed on the pick up is 245cm long / 175cm large. Do i need to take a 6 foot or a 8 foot rac? thanks by advance for your help. | Based on the measurements...
When Removing a Trailer Brake Line Does Brake System Have to be Bled
If I remove one brake line on a tandem axle trailer will I have to bleed all four | If a brake line is opened on a braking system is common practice and recommended to bleed the entire system. There's a high possibility air entered the system...
Will Draw-Tite 41901 Fit a 1996 Chevy K2500 Truck
Good Afternoon: I would like to know if the 41901 Hitch would fit on my 1996 Chevrolet \ Cheyenne 4X4 2500 Turbo diesel with an extended cab. | The Curt # 41901 will fit if your truck has a long (8 foot) bed and doesn't have a roll pan bumper. If...
Filter Your Search
Contact and Help