Recommended Flat Tow Setup For 2011 Chevrolet HHR
What is needed to flat tow a 2011 chevrolet hhr | I would be happy to recommend a flat towing setup for your 2011 Chevrolet HHR. Starting with the base plates I recommend the Roadmaster Crossbar-Style Base Plate Kit # 3141-1 which is confirmed...
Does SuperChips Programmer Flashpaq part SU4845 Fit 2008 Chevy HHR SS
I bought a superchips programmer for my 2008 HHR SS but I could not get it to work. Does the Edge unit come with the program already installed? If so which unit should I purchase for this application? | For your 2008 Chevy HHR SS the Superchips...
Recommended Hitch Reducer for 2" to 1-1/4"
Vehicle: 2020 Subaru Forester Do you have a product that s into a 2 trailer hitch receiver and converts it down to a 1 1/4 receiver? If so, please provide me with a product number and price on the item. Thank you | Yes, the Brophy Hitch Reducer...
Recommended Roof Rack With Yakima HD Crossbars for 2018 Mazda CX-5
I have a 2018 CX-5 with a bare roof. Really like the Yakima with HD crossbars. The spot for a hook in the crossbars would be great for strapping down a couple pipes or 2x4 lumber. Or another brand with similar crossbars? | For your 2018 Mazda...
Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2018 Ram 3500 Dually Crew Cab Factory Air
Vehicle: 2018 Ram 3500 I have a 2018 Ram 3500 8 box, dually, no boards under the box, factory hitch and max tow factory air bags. I bought a slide in camper. looking at torklift TLD2124 and TLD3109 for tie downs. However it says that the TLD3109...
Does a Vehicle Being Flat Towed Need a Breakaway System
how to wire to car? | When flat towing a vehicle the supplemental braking system being used will have a specific breakaway switch that goes with it. Supplemental braking is required by law in most states so if you are not using one you will...
Some Dimensions of SeaSucker Surfboard Carrier
I’m looking at your SeaSucker SP3300 board rack kit. I’m wondering what the actual length is for the cross bars between the mounts, not including the mounts in the overall length. I want to know if my SUP will be able to sit on the bar between...
Trailer Hitch Recommendation for a 2011 Chevy HHR
2011 Chevy HHR LT2. I was told Curt and Draw-tite are the same companies. I read on your site that they are not the same. The Curt and Draw-tite are identical hitches and mount the same. What is the truth and difference in the hitches? ...
How To Confirm Wheel Bolt Pattern for 215/75-14 Tire and Wheel
I am trying to buy a wheel and tire for a trailer. Im puzzled about the bolt pattern measurement. I currently have a Load Star ST215/75D14 tire on the trailer. The wheel is a 5 bolt. I think it is a 4.5 but am not sure. How would you recommend...
Sewer Hose Carrier for Motorhome
Looking for a sewer hose carrier that mounts under the coach. I need the square access door thats is installed on the side of the coach that comes with it. Part numbers please so I can order it. Thanks | We do offer sewer hose carriers for hose...
Parts Needed to Flat-Tow a 2009 Chevy HHR
I’m buying a hhr to flat tow. Can you tell me what all I need and how much a package deal is. Also I’m in Oklahoma by Tulsa do you have any shops to install ? Thank you | In order to flat-tow a 2009 Chevrolet HHR; you'll need a base plate kit,...
Installation Time for a Hitch on a 2009 Chevrolet HHR
Why does the Curt hitch #11447 require more install time than the HiddenHitch, DrawTite, and Valley hitches ? | For this particular installation I do not see a difference in the installation so I believe the difference is just in the amount...
Parts Needed to Flat Tow 2019 Jeep Cherokee Limited, Latitude or Latitude Plus
What all will I need to flat tow my 2019 Jeep Cherokee? I'm not sure which model I have. | For your 2019 Jeep Cherokee you'll need to first start with a base plate kit. For that you'd want the part # RM-521452-4. This fits the Latitude, Latitude...
Trailer Hitch Availability for 2011 Chevy HHR
Need trailer hitch with 2inch receive r for 2011 Chevy HHR. Motorcycle dolly requires 2inch receiver. | For your 2011 Chevy HHR we only have 1-1/4 inch hitches like the # 24756 since the vehicle is lighter duty. The 2 inch hitches are only...
Do I Need to Trim The Rear Fascia of my 2010 Chevy HHR SS to Install the Draw-Tite #24756
the hitch says it will fit the ss model hhr. Is this done without cutting the rear bumper. I remember seeing once a while back modification to the bumper was required just wondering if this was still the case, thanks. | Yes, you will need to...
Troubleshooting Ground Circuit on Trailer
Help. My trailer lights dont work. All of them, all at one time. I plugged my tow vehicle into my neighbors trailer and it works fine. I figure that I need to look for a master ground fault. Any ideas on where to start looking to solve the problem?...
Solution for Boat Trailer to Add Tongue Weight to Prevent Sway
I am towing a 25 sailboat with total weight incl. equip of 6300 Lbs. Straight tongue, 2 on the ball. My vehicle is a Ford F150 w/max towing package. Truck feels like the front end is skating at highway speeds. I just came up with a tongue weight...
Disc Brake Master Cylinder and Bypass Lockout Solenoid for Demco Surge Brake Actuating Coupler
1. I am converting 12” drum brakes on a 5,000 lb single axle boat trailer to disc. I have a Demco DA66B drum brake actuator. I prefer the bypass style solenoid, so I believe I have a few options: a. New master cylinder with integrated bypass...
Could I Install Base Plate Kit # 3141-1 on a 2010 Chevy HHR, Would I Need to Remove My Front Fascia
I traded my 2007 HHR for a 2010 HHR. Have base plate Roadmaster installed on 07 and want to transfer it to the 10. Does the whole facia and bumper have to come off? The RV dealer installed the 07, but I want to transfer myself to save $900. Please...
Can the Lippert Manual Pull-Out Step Be Taken Apart and Re-Painted
Can the Lippert Manual Pull-Out Step for RVs be dis-assembled for re-painting? | There aren't instructions for the Lippert Manual Pull-Out Steps # LC432690 to be disassembled, but there isn't any reason why you couldn't take them apart for re-painting....
Correct Trailer Hitch for 2014 Mercedes-Benz CLA250 All Models and How To Convert To 2
Vehicle: 2014 Mercedes-Benz CLA-Class I am interested in a hitch for a 2014 mercedes benz CLA 250 4 matic. Before I order I want to make certain that its the proper part. Will the C12163 be the correct hitch? Also need a 1.25 to 2 adaptor to...
Is There a Trailer Hitch for 2010 Chevrolet HHR With Heavy Tongue Weight Capacity
I need a hitch for my 2010 Chevy HHR with 500lb tongue weight to haul a mobility scooter. | The only trailer hitches that fit a 2010 Chevy HHR are Class I hitches with a 1-1/4 inch receiver, 2,000 lb towing capacity and 200 lb tongue weight...
Adapter Needed to Make Roadmaster Baseplates Compatible With Blue Ox Tow Bar
I just purchased a 2009 HHR LS which has the 3141-1 Base Plate along with a cross bar. I already have a Blue Ox Aladdin 7325 Tow Bar what will I need to adapt the Tow Bar to the Cross Bar. | The Roadmaster XL Base Plate Kit - Removable Arms...
Can a Tow Bar be Mounted at an Angle When Flat Towing a 2011 Chevrolet HHR
Coach higher than pull vehicle 2011 Chev HHR. Can tow bar be at an angle, if so how much. If not what is the recommended fix. Thanks | I would not recommend towing your 2011 Chevrolet HHR at an angle. You will want the tow set up to be as...
Filter Your Search
Contact and Help