How Much Weight Gets Transferred To Trailer Axles and Vehicle Front Axle with Weight Distribution
I have a weight distributing hitch with a tongue weight of 800 lbs. In the article I read, it states the weight is distributed to both truck and trailer axles. My question is, how much weight is placed on the trailer axles? | The key to weight...
Recommended Motorcycle Chock for 2011 Honda Goldwing
Will the bike lock fit my goldwing | I have a solution for you, but the # BWMC2301 is not a confirmed fit and B&W does not offer a Biker Bar for a Honda Goldwing. Instead, the best option we have for you is the Tow-Rax Removable Wheel Chock...
7-Way Trailer Wiring Recommendation for 2003 Land Rover Discovery II
I need a 7 pole round and a 6 flat blade connector for a Landrover 2003 discovery to a dump trailer | We have trailer wiring solutions for your 2003 Land Rover Discovery II but they are hardwired harnesses with like the part # C59496 that provides...
Can the Tekonsha P3 Trailer Brake Controller be Reset
Is it possible to do a factory reset on the settings or is that even necessary. I made a mistake by entering the wrong info to set the brake controller I set it for 7.0 instead of 6.0 | You can reset the controller by unplugging it for 15 minutes....
Will Wheel Masters Vision Plus Extendable Towing Mirrors Fit a 2003 Land Rover Discovery
Will these mirrors work on my 2003 Land Rover Discovery? | The Wheel Masters Vision Plus Extendable Towing Mirrors part # WM6500 has not been fit tested on the 2003 Land Rover Discovery II. However, I spoke to my contact at Wheel Masters who...
Why Do Swinging Bike Racks All Swing Towards Passenger Side
is there a swing away hitch that swings towards the drivers side instead of passenger side? | The reason bike racks all swing to the driver side is because when people pull over on the side of the highway they almost always pull to the right...
Tow Bar Lighting Recommendation for 2001 Land Rover Discovery II
I have a 1992 Beaver Contessa, 2001 Land Rover Discovery and a Roadmaster Falcon II bar. I have in my cart the base plate for the LR and the Airforce one for supplemental brake system. I can’t tell from the write up of the Airforce whether I...
Parts Needed to Install Brake Controller on 2000 Range Rover HSE
I have no current trailer wiring whatsoever but want to tow a trailer braked trailer. I have a 4 wire adapter kit from Atlantic British came with the vehicle, not installed yet. I assume I also need a controller like Tekonsha Prodigy P3 and...
Recommended Cover for 22' Jayco Travel Trailer for 6 Months Storage in Connecticut
always have had a adco cover the item # 290-52242 looks good, it says for rain and snow, but to be used between trips. well i am covering it for 6 months threw the winter, is it ok for that length of time, this is not short term, i like that...
What Adapter Converts 4-Way Flat to 7-Way Round Vehicle Connector on 2000 Land Rover Discovery II
hi, im planning to purchase an Atlantic British wiring exclusive harness for my vehicle that converts the land rover to a flat 4 plug. my trailer has a 7 round plug. questions: do you have a wiring harness for my land rover that ends in a...
Installation Instructions for 4- and 7-Way Installation Kit # ETBC7 for a 2004 Land Rover Discovery
How do I look up this FAQ article you wrote for the 2004 land rover discovery brake controller install | No need to look for, I linked it for you on the right! We do not have a video on a 2004 Land Rover Discovery but I have linked a video that...
Weight Distribution Recommendation for 2018 Keystone Bullet Crossfire 1900RD
Looking to install a weight distribution system on my 2013 Toyota Tacoma. It has a 4 cylinder engine, with 4 door access cab. Has a standard 6 foot bed. Trailer that I am towing is a 2018 Keystone Bullet Crossfire 1900RD. Have a friction sway...
7-Way to 4-Pole Adapter Not Functioning When Installed on 2001 Land Rover Discovery II
i have a 2001 land rover discovery 2. I recently bought a 7 pin to 4 flat adapter. When i plugged it in and hooked it up...the left and right blinkers go at the same time, and running lights dont work. I hooked the trailer up to my friends truck...
How to Install a Brake Controller on a Vehicle that has a Factory 4-Way
I have a 2001 MBZ 320. I purchased your Prodigy controller, and your ETBC7 kit. The vehicle has your 4 wire flat connector already installed. What is the best way to add the Prodigy and 7 pin US connector on this vehicle? Are there any connectors...
How to Install a Brake Controller in a 2000 Land Rover Discovery II
I have a 2000 Land Rover Discovery. I purchased your Prodigy controller, and you ETBC7 kit. Under the dash, I have access to both the actual brake switch wiring, and, to a gray-colored plug in the LR harness. 1 Is there an adapter to the...
Recommended Trailer Wheel With 3.19 Diameter Hub Bore
Do you carry a 10inch wheel with a 5 lugs on 4-1/2 WITH a 3.19inch center bore ? I cant seem to find any 10inch wheels like this. It this not a standard ? Thanks, | I have another option for you, but we do not have a 10" diameter wheel that...
Trailer Suspension Hanger Kit with the Most Lift for Tire Clearance Under the Trailer Bed
HiI need the most lift so tires can be under trailer bed. Which tandem kit will give me the most tire clearance. Also, any spring over information u may have would be appreciated? Thanks | The # APT4 Tandem-Axle Hanger Kit will provide about...
Replacement Top End Cap for Round Upright Mast on Hollywood Racks Sport Rider Bike Rack
Is it possible to just get the end cap for the upright mast? | Yes, to replace just the top end cap for the round upright mast on your Hollywood Racks Sport Rider Bike Rack you can use part # HR54FR. This is a direct replacement so it will work...
Use of Base Plate Kit and Tow Bar on 2000 Land Rover Discovery II w/ Dealer Installed Brush Guard
I need a baseplate/towbar to work with the dealer installed brush guard. | I contacted our representative at Roadmaster and he informed me that the Roadmaster XL Base Plate Kit, part # 1910-1 will work with your dealer installed brush guard. To...
Ultimate Trailer Jack For 2018 Keystone Bullet Crossfire 2200BH Travel Trailer
Hello, I am trying to find a suitable manual tongue-jack for my 2018 Keystone Bullet Crossfire 2200BH travel trailer. I believe that the following product you offer would work, could anyone there help confirm? Item # 322-RDJ-2K Thank you!...
Will the Reese Titan WD Shank # RP54976 Work with Reese Weight Distribution # RP66074
I have a 2011 Ford Super Duty and it came equipped with a 2 1/2 inch receiver. I am planning on purchasing the Reese dual-cam set up in the future. My question is...Will the Reese hitch head from kit #RP66074 fit on the Reese 2 1/2 inch shank...
Recommendation Of Roof Rack That Fits 2004 Land Rover Discovery 2
What is the maximum space between the cross bars? I want to put this on a 2004 Land Rover Discovery 2. | If your 2004 Discovery has factory rails that run front to back the Malone AirFlow2 Roof Rack - 58" Long # MPG216 is confirmed to fit. ...
Availability Of Lift Kit For 2011 Jayco Jay Feather Ultra Lift W/ # 10 Dexter Torflex Axle
Do you guys have a lift kit that is bigger then 2 5/8?this trailer has no clearance and Im replacing Jacks all the time. | Since your 2011 Jayco Jay Feather Ultra Lite X17Z has a # 10 Dexter Torflex axle the only lift kit available for it is...
Parts Needed to Install a Trailer Brake Controller on a 2004 Land Rover Discovery II
I was hoping you could help me. I am looking to fit a trailer braking system on my Land Rover and not sure which one I need. I have a land rover 7 way wiring harness already on the vehicles. I believe it is a european harness as it is 7 pins...
Filter Your Search
Contact and Help