Recommended Cover for 22' Jayco Travel Trailer for 6 Months Storage in Connecticut
always have had a adco cover the item # 290-52242 looks good, it says for rain and snow, but to be used between trips. well i am covering it for 6 months threw the winter, is it ok for that length of time, this is not short term, i like that...
Recommended Option to Carry Bikes and Skis on 2008 Land Rover LR2 HSE
I am looking for a better way to haul my bikes and ski/snowboard equipment around. The bikes are a bigger deal to me, but I might be open to something different if it would allow me to also haul my skis and or snowboard during the winter. I...
Will Installing Trailer Wiring Disable the Backup Sensors and Alarm on a 2008 Land Rover LR 2
I have a 2008 Land Rover LR2. It has back up sensors in the bumper and an alarm sounds if vehicle is in danger of backing into something. These back up alarms apparently sound continuously if a trailer is towed. The OEM wiring harness stops...
Replacement Drive Arm For A Solera XL RV Awning
I need only the right side facing the rv. the one with a motor. can i buy just one side? If so what is the part number in Black. it is for the Solera 19 foot xl awning black fade i just bought from Etrailer delivered less than a week ago...
2 inch Lift Kit that Fits 2017 Highland Ride Roamer 367BHS
I have a 2017 highland ridge roamer 367bhs and I’m looking for a lift kit for it. I have. 2020 gmc 3500 and my rv is nowhere close to level. And I have about 6-8” of height between the rails and rv so I can’t lower my hitch. I am not sure what...
Does the Upgraded ModuLite Kit # C59496 Come With a Dust Cover
For product: Upgraded Modulite Vehic le Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit Item # C59496 Does this product include a cap/cover for the 4 prong trailer wire plug? In the pictures there doesn't seem to be a cap...
Trailer Hitch and Wiring Recommendation for 2012 Land Rover LR2
I want to install a trailer hitch on my 2012 LR2 Land Rover. My questions are as follows: What hitch will work best as a bolt on where I dont have to cut the rear bumper? What electricial unit do you recommend for this vehicle. Keep in mind...
Parts Needed to Install a Brake Controller in a 2015 Land Rover LR2 with 4-Way
Hello, Do you have instruction on installing brake controller and 7 pin connector on recent year Land Rover LR2? I have a 2015 model with factory 4 pin connector. However my camper requires brake controller. Thank you | From there you would...
Lift Kit to Raise Suspension of 2018 Mesa Ridge 2910RL
With box pin all the way up, the trailer is 8 inches higher at the truck box than the rear of the trailer. I feel I need to raise my Lippert trailer suspension 4 inches to level out the trailer so as to pull level. Can you help? | The tandem...
Availability of 50 amp to 50 amp RV Power Cord Extension
I have a 2020 Mesa Ridge fifth wheel that has the 50 amp service with the threaded collar on the current Furrion power cord. I need to get an extension cord, as my factory cord will not reach the power pole at the campsite. I would like to...
Will the Trailair Flex Air 5th Wheel Pin Box Lower the Nose On the Trailer
Is the pin box going to be the same height, or is it lower than my OEM pin box? I have raised the OEM pin box as high as I can and dont want it any lower. I dont have any adjustment left for the trailer to run level. | The Trailair Flex Air...
Availability of 13-Pin to 4-Pin Adapter for a 2008 Land Rover Configured for European Standards
Hello, I have a 2008 Land Rover LR2 with a standard European 13-pin trailer light hook-up. Now back in the states, Id like to get a 13 to 4-pin adapter without having to do a complete rewire. Is there such an adapter out there? Thanks!...
Why Isnt My Furrion Soundbar Playing Sound From My T.V.?
When playing a DVD, the sound will only come out of the tv speakers. How do we get it come through the furrion sound bar stereo? It has the single audio out put wire coming from the tv. We put it on DVD. No sound. | It sounds like you...
Best Storage Cover for 2020 Highland Ridge Mesa Ridge MF384RLS
I am in the market for a cover for my 2020 Highland Ridge - Mesa Ridge fifth wheel. The exact model is the MF384RLS. I live in Michigan and want a cover that will protect the fifth wheel from the elements. Do you have any suggestions on a...
Will the Trailer Wiring Harness Affect a 2008 Land Rover LR2 Back-up System
I just purchased this kit for use on a 2008 Land Rover LR2 HSE. The cars have rear back-up sensors in bumper. Will this componant disable that system, or is something further required? | No, the # C59496 trailer wiring harness for the 2008 LR2...
Parts Needed to Install 7-Way Trailer Connector on 2008 Land Rover LR2
Hi, I would like to know what wire to buy to install on my Land Rover LR2 2008. Your finder tool tells me to get a 4-way flat connector, but the trailer I want to connect is a 7-way connector. Do you sell 7-way connectors for the LR2? | To install...
Looking to upgrade our factory installed Lippert 1621HD with the MR74VR on our 2021 Mesa Ridge 284RLS with a GVWR of 12,500 lbs. We tow with a 2016 F250 4x4 Lariat. Even after adjusting the kingpin to its highest level and the BandW Companion...
Availability Of Lift Kit For 2011 Jayco Jay Feather Ultra Lift W/ # 10 Dexter Torflex Axle
Do you guys have a lift kit that is bigger then 2 5/8?this trailer has no clearance and Im replacing Jacks all the time. | Since your 2011 Jayco Jay Feather Ultra Lite X17Z has a # 10 Dexter Torflex axle the only lift kit available for it is...
Will the C59496 Trailer Taillight Wiring Harness Work on a 2008 Land Rover LR2
I have had alot of difficulty finding compatible parts for my 2008 Land Rover LR2. When searching your site it says that this product is ready to go for my vehicle. This may sound skeptical, but are you 100 certain that it is desgined for and...
Will Curt 4-Way Trailer Connector Work With 2009 Land Rover LR2?
I have read that this vehicle cannot be wired for towing because it has a CAN network protocol to transmit signals. Does this kit work on my 2009 Land Rover LR2. Do I need it programmed by a Dealer? Thank you for any assistance. | The Curt Powered...
Lippert 2.0 Ground Control Landing Gear Problem Solution
Im trying to diagnose which part is broken on my 2015 Open Range 316RLS fifth wheel with Lippert 2.0 Ground Control System. The left front landing gear stopped working during a leveling adjustment and the leg is under full weight at the moment. The...
Does the Draw-Tite Hitch 75688 for a 2008 Land Rover LR2 Require Trimming of the Rear Fascia
land rover states that the bumper needs to be cut to fit towbar is this true? | I could see needing to trim the rear fascia for the Land Rover OEM hitch, but the Draw-Tite hitch does not require fascia trimming. It is designed to fit just below...
Recommended Roof Cross Bars for a 2007 Land Rover LR2 SE
Looking for black rill guard and roof for 2007 Land Rover LR2, SE | While we do not have any grille guards that will work with your 2007 Land Rover LR2, we do have a wide variety of roof racks that'll work great. If your vehicle has a slick...
Distance From Hitch Pin Hole to Sleeve of Hitch Extender e68YR
What is the distance from the hitch side hole to the sleeve? | The distance from the hitch pin hole to the sleeve is 2 inches for the Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long # e68YR. |
Filter Your Search
Contact and Help