Discover America Fifth Wheel x > !Sightseer Motorhome x > Mule x > !Rio 5-Door x >

Winch and Custom Winch Mount for a 2015 Kawasaki Mule 4010

I'm looking for a winch and mount for a 2015 Kawasaki Mule 4010. Thank you. | For your 2015 Kawasaki Mule 4010 I recommend Superwinch # SW1130220 rated for 3,000 pounds. And for a custom fit mount that will fit the Mule and the winch you can...

Winch Mount for Superwinch Terra 45 on Kawasaki Mule 4010 ATV

Hello...Have the task of mounting my new Terra45 to my 2014 Kawasaki Mule 4010 4wd. Is there a mount made? If so model number and if available ? Thanks... | For your 2014 Kawasaki Mule 4010 we have the Bulldog Winch Mount # BDW15106. This is...

Center to Center Distance Between Clips on K-Source Panoramic Aspheric Rearview Mirror # KSRM1300

What is the measurement center to center between the clips? | I went out to the warehouse to measure K-Source Panoramic Aspheric Rearview Mirror # KSRM1300 for you. The center to center distance between the clips is 3-1/4 inches. |

Recommend Recovery Winch for a Kawasaki 3010 Mule Trans 4x4 Diesel

I have a 3010 4 x 4 Kawasaki Mule. My need is the capacity to pull it up a 40 degree muddy creek bank. Understand the Mule weighs about 1400 lbs. Should I use a snatch block ? I would like to mount it permanently. Thanks, | I have the perfect...

2006 NuWa Discover America Landing Gear Replacement Motor

My Fifth wheel is raising and lowering very slowly. Not sure if this is a gearbox or motor problem? Current motor is an Atwood Mobile MPD71113 which I am seeing has been discontinued. Please provide replacement part numbers or compatible landing...

Replacing Create-A-Breeze 8100 Vent Fan With Fan-Tastic 7350 Wireless Vent Fan

I have a 2012 NUWA Discover America Fifth Wheel. I am wanting to upgrade one of my fantastic fans to the 7350 version with remote. My fan is a B8100 version with wall mounted dome lift motor switch and on off switch to power the fan. It has...

Replacing Axles Or Replacing Brakes/Bearings On 2006 NuWa Discover America 5th Wheel Trailer

I have some ne r lube hubs on my 2006 Nuwa 5th wheel, looking at all the options for doing brakes and bearings vs replacing the axles. My question is, do I need to change wheels too since the nev r lubes are set up for 0 offset? | I would be...

Diameter of the U-Bolts for the Lippert Bolt On Shock Kit 281281

What diameter are the U bolts in this set? | The diameter of the U-bolt for the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 is 9/16". |

Winch Mounting Plate for Kawasaki 610 4x4 and Chicago Electric 3000# Winch

I understand that the mount fits the Kawasaki 610. I need info on its ability to mount the Chicago Harbor Freight Model 95912. The mounting plate that comes with the Winch is 7.086 Long x 4.881Wide X 2.165 High. The screw holes on the mounting...

What Does Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR Weigh

What is weight of cover for 35ft 5th wheel? | The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR that you referenced weighs 44 lbs. |

Will Advent AC Unit # ACDOM150 Replace Dometic Duo Therm Unit Easily

Is this a replacement for the Duo Therm? | Yes, the Advent AC unit part # ACDOM150 that you referenced will work great as a replacement for a Dometic Duo Therm unit like you have. We had a customer come back and tell us how well this worked...

Replacement Legs for Landing Gear on 2008 NUWA Hitchhiker

We have a 2008 NUWA Hitchhiker,, each landing leg has its own electric motor, wired to its own operating switch. My legs are 29 1/2 inch long and punch out from the top is 6 3/4 and from the bottom is 5 1/4 do I need two LG179013 legs? Thanks...

Installation Of Brake Controller On 2016 Mercedes-Benz Sprinter With Tow Package

I have a 2016 MB Sprinter, I ordered it with the hitch package. I called MB of Tampa and they said that the harness for the brake controller is included with the hitch package. I watched your video for installing the controller on a 2013 Sprinter...

Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel

We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...

Custom Winch Mounting Bracket for a 2018 Kawasaki Mule 410

Hello, could you recommend a mounting kit for my Mule 4010 2018 for a Warn advance 3000? thanks | We currently have one winch mounting brackets that is designed for your 2018 Kawasaki Mule 410 which is the Bulldog Winch Custom-Fit Steel ATV...

Lippert SolidSteps to Fit a 30 Inch Doorway

Do you have the Solidstep for a 30inch doorway? If so, how much? Thanks | We sure do. How many steps are you looking for? For a 30 inch wide door use part # LC791575 for a quad step if your threshold height is between 35 and 44 inches, part...

Bearings for 7,000 lb Dexter Axle and is Press Needed to Install

what size bearing fits a 7000 lb dexter axle. also do you need a press to install into the hub. | For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer...

How To Convert Dometic Manual Awning To Powered Awning On 2004 NuWa Discover

I have a 2004 NUWA discover America hitchhiker 5th wheel trailer. I would like to upgrade my manual domestic awning to a electric. When I put that trailer in your guide the part number suggested says it needs a minimum of 69” unobstructed...

Will Quick-Fit UTV Bench Seat Covers # CA18033 Fit 2003 Kawasaki Mule 550 KAF300C

I have a mule 550 kaf300c. Will this fit my seats? | I spoke with my contact at Classic Accessories and the Quick-Fit UTV Bench Seat Cover, # CA18033, is made to fit seats that measure 41-1/4 inches long by 17 inches wide and backs measuring...

Replacement Nev R Lube Bearing Kit Recommendation for Trailer with Hub/Rotors # K2HR79XLDE

I have a trailer wheel bearing on Kodiak XL-Lube disc brake kit part number K2HR79XLDE running a little hot. When eTrailer installed this kit in August 2017 I assumed that they used Nev-R-Lube 031-071-03 but it now appears that I assumed wrong....

Which Winch Mount Fits 2015 Kawasaki Mule Pro-FXT

WILL THE MOUNTING BRACKET CODE # 2202882, FIT A KASASAKI MULE PRO FXT 2015 UTV? | We do have a winch mount that is confirmed as a fit for your 2015 Kawasaki Mule Pro-FXT but it is not the # 2202882. Instead you would need the # BDW15184 which...

Compatibility of the SuperWinch LT3000 Winch with the Bulldog Mounting Bracket # BDW15184

Will this mounting bracket # BDW15184 fit the Superwinch LT 3000 ATV winch? Will both the mounting bracket and hitch fit a 2015 Kawasaki Mule Pro-FXT? | Yes, the Superwinch LT3000ATV Winch, # SW1130220, will fit the Bulldog Winch Custom-Fit...

Do Nev-R-Lube Trailer Bearings Need Maintenance

Need to know how to check brakes on my nev-r-lube axle and when those bearings need to be replaced. | The Nev-R-Lube style bearings aren't designed to ever need maintenance. They have a 100,000 mile warranty and if they ever failed it would...

Seat Cover Recommendation for a 2007 Kawasaki 4010 Mule

will the ca18033 fit the 2007 kawasaki 4010 mule seats? | Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover # CA18033 that you referenced will fit your 2007 Kawasaki 4010 Mule. |

<< Back to Results

Filter Your Search