Diameter of the U-Bolts for the Lippert Bolt On Shock Kit 281281
What diameter are the U bolts in this set? | The diameter of the U-bolt for the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 is 9/16". |
Replacement Legs for Landing Gear on 2008 NUWA Hitchhiker
We have a 2008 NUWA Hitchhiker,, each landing leg has its own electric motor, wired to its own operating switch. My legs are 29 1/2 inch long and punch out from the top is 6 3/4 and from the bottom is 5 1/4 do I need two LG179013 legs? Thanks...
Will Advent AC Unit # ACDOM150 Replace Dometic Duo Therm Unit Easily
Is this a replacement for the Duo Therm? | Yes, the Advent AC unit part # ACDOM150 that you referenced will work great as a replacement for a Dometic Duo Therm unit like you have. We had a customer come back and tell us how well this worked...
What Does Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR Weigh
What is weight of cover for 35ft 5th wheel? | The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR that you referenced weighs 44 lbs. |
2006 NuWa Discover America Landing Gear Replacement Motor
My Fifth wheel is raising and lowering very slowly. Not sure if this is a gearbox or motor problem? Current motor is an Atwood Mobile MPD71113 which I am seeing has been discontinued. Please provide replacement part numbers or compatible landing...
Replacement Nev R Lube Bearing Kit Recommendation for Trailer with Hub/Rotors # K2HR79XLDE
I have a trailer wheel bearing on Kodiak XL-Lube disc brake kit part number K2HR79XLDE running a little hot. When eTrailer installed this kit in August 2017 I assumed that they used Nev-R-Lube 031-071-03 but it now appears that I assumed wrong....
Replacement Lift Operator and How to Remove the Lid of a MaxxAir Vent
I need to replace the lift operator on my Maxxair vent on my 2018 Winnabago/Travato I think part number ma10-20281k-1af is the correct part, but I cant get the lid off of the unit looks like it is riveted on. Any suggestions? | The Replacement...
How To Convert Dometic Manual Awning To Powered Awning On 2004 NuWa Discover
I have a 2004 NUWA discover America hitchhiker 5th wheel trailer. I would like to upgrade my manual domestic awning to a electric. When I put that trailer in your guide the part number suggested says it needs a minimum of 69” unobstructed...
Replacing Axles Or Replacing Brakes/Bearings On 2006 NuWa Discover America 5th Wheel Trailer
I have some ne r lube hubs on my 2006 Nuwa 5th wheel, looking at all the options for doing brakes and bearings vs replacing the axles. My question is, do I need to change wheels too since the nev r lubes are set up for 0 offset? | I would be...
Replacing Create-A-Breeze 8100 Vent Fan With Fan-Tastic 7350 Wireless Vent Fan
I have a 2012 NUWA Discover America Fifth Wheel. I am wanting to upgrade one of my fantastic fans to the 7350 version with remote. My fan is a B8100 version with wall mounted dome lift motor switch and on off switch to power the fan. It has...
Bearings for 7,000 lb Dexter Axle and is Press Needed to Install
what size bearing fits a 7000 lb dexter axle. also do you need a press to install into the hub. | For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer...
RV Power Control Center and Converter for Upgrading From 30 Amp to 50 Amp Service
I currently have a 30 amp Magnetek 6345 in my camp trailer and wanted to convert it to a 50 amp system. I am mechanically inclined and other then the actual dimension opening in the current opening what converter system would be a good swap,...
Do Nev-R-Lube Trailer Bearings Need Maintenance
Need to know how to check brakes on my nev-r-lube axle and when those bearings need to be replaced. | The Nev-R-Lube style bearings aren't designed to ever need maintenance. They have a 100,000 mile warranty and if they ever failed it would...
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Filter Your Search
Contact and Help