Large Steps for Trailer with 21-3/4" Entry Height
I have a KZ Sportman tht toy hauler. Will the MORryde 2-24 step above fit my entry door? My flange to flange measure meets the width qualifier. The from my threshold is 21 and3/4 to the ground. with this 2 step unit...should there be a problem?...
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Recommended Roof Rack and Cargo Box For 2016 Audi A8L
I need a roof rack and cargo box for my 2016 A8L, but on your site, it appears that while Rhino-Rack fits the car, theres no box that will fit, can you please advise on boxes that will fit the Rhino Rack part # RRVA126B-2 | For your 2016 Audi...
What Tire Chains Will Fit a 275/35-20 Tire Size on a 2008 Audi A8
Will these snow cables fit 275/35-20 tires on a 2008, Audi A8L. There seems to be very little clearance between the inner sidewall and what I think is part of the suspension. Please advise. Thank you | We do carry tire chains that will fit...
Is There a Ball Mount with Receiver and No Drop to Tow a Trailer and Carry Bikes at the Same Time
Is there a ball mount adapter without a drop, in other words I would like to use this and use my utility trailer at the same time? BTW I have a 2inch receiver and ball... | While there isn't a multi-purpose ball mount that doesn't have a rise...
Will Curt 7 to 5-way Adapter for German Cars and LED Trailers Support Reverse Light Circuit
Ive got an Audi Q5 2014 with the factory 7-pin plug. If I use this adapter with a 4-pin trailer harness, I assume that never supports a backup light. But if I use a 5-pin harness and a trailer with backup lights, this will support the backup...
Is the Dutton-Lainson Worm Gear Hand Winch, # DL10970 Salt Water Resistant for Marine Applications
I want to set up a winch to rotate a swing boat lift 180 degrees in a marine environment. Is this winch compatible with marine salt water environment? Thanks | The Dutton-Lainson Worm Gear Hand Winch, # DL10970, is made of laminated steel gears...
Will Advent AC Unit # ACDOM150 Replace Dometic Duo Therm Unit Easily
Is this a replacement for the Duo Therm? | Yes, the Advent AC unit part # ACDOM150 that you referenced will work great as a replacement for a Dometic Duo Therm unit like you have. We had a customer come back and tell us how well this worked...
Does a Motorcycle Carrier Reduce the Weight Rating of the Hitch Receiver
I looked over some QandAs relating to carrying dirt bikes on hitch carriers. It appears that you can add the weight of the dirt bike and carrier in my case 250 lbs +50lbs = 300lbs to get the required minimum tongue weight capacity of the car...
Available Trailer Hitch for 2009 Audi A8 for Use with Cargo Carrier
I am considering buying item 11199 for my 2009 audi A8. Is there a product that fits my car with a higher tong weight? I will be carrying about 150 Lbs and the limit on this item is 150. Id like to be on the safe side and get something stronger. Thanks...
Roof Rack Recommendation for 2014 Audi A8 L
Hello, Im searching for the roof rack for the Audi A8 2014 version L. Do you have this? Regards | Rhino Rack offers a few different roof rack options for your 2014 Audi A8 L. I have included a link to the different styles that are available...
Will the Yakima SkyBox 16 Fit Rhino Rack on 2014 Audi A8L
Im trying to figure out if the Rhino Rack will fit and be strong enough to support a Yakima Skybox NX 16, on our 2014 Audi A8L. Pretty sure itll fit, but not sure about whether the specs for the Euro rails are ok for a cargobox... | Starting...
Dimensions of Fascia Trimming to Install Curt Trailer Hitch on 2005 Audi A8
Looks like the C11199 receiver assembly bolts up to my car and the C56175 wiring adapter will splice into the OEM wiring, but I am curious about three things: 1 How large is the fascia/bumper cutout, and where is it located? 2 Does the receiver...
How to Determine Correct Over/Under Conversion Lift Kit for Trailer
hello, Im looking to get a little more height out of my 2017 KZ sportsman classic 180tht. Id this the kit I need? It is a 5000 lb Lippert axle. Single axle. | I can tell you how to easily determine the correct over/under conversion kit for...
Trunk Mount Bike Rack for a 2016 Audi A8
Would you recommend this OutWay for a 2016 Audi A8? | Yes, out of all the trunk mount bike racks we carry I do recommend the Thule OutWay # TH56BV, for your 2016 Audi A8. I have an older version of this rack and it is by far the easiest trunk...
2006 NuWa Discover America Landing Gear Replacement Motor
My Fifth wheel is raising and lowering very slowly. Not sure if this is a gearbox or motor problem? Current motor is an Atwood Mobile MPD71113 which I am seeing has been discontinued. Please provide replacement part numbers or compatible landing...
Roof Rack Recommendation for 2011 Audi A8L
Which roof rack will fit my 2011 Audi A8L? The OEM Audi A8 rack does not fit the LWB version | Rhino-Rack offers roof racks that are compatible with the long wheelbase model of your 2011 Audi A8. I'd recommend the Vortex Aero crossbar roof rack...
Replacement Straight Axle Spindles For the Lippert Axle On a 2019 K-Z Sportsmen Classic 180TH
I have a 2019 KZ 180TH. I have a lippert 5k axle with spindles. I would like to replace it with a straight axle like they use in the off road models. Would I be able to use a dexter straight axle and reuse my current lippert hubs and brakes...
Trunk Mount Bike Rack Recommendation for a 2015 Audi A8
Hello, I am looking at buying the TH65JV to carry 2 road bikes. Do you see me having any issues doing this. i need to transport 2 bikes and i did not want a roof rack as i know i would forget the bikes are there and run into my garage. lol Anyways...
Do Nev-R-Lube Trailer Bearings Need Maintenance
Need to know how to check brakes on my nev-r-lube axle and when those bearings need to be replaced. | The Nev-R-Lube style bearings aren't designed to ever need maintenance. They have a 100,000 mile warranty and if they ever failed it would...
Replacing Create-A-Breeze 8100 Vent Fan With Fan-Tastic 7350 Wireless Vent Fan
I have a 2012 NUWA Discover America Fifth Wheel. I am wanting to upgrade one of my fantastic fans to the 7350 version with remote. My fan is a B8100 version with wall mounted dome lift motor switch and on off switch to power the fan. It has...
Diameter of the U-Bolts for the Lippert Bolt On Shock Kit 281281
What diameter are the U bolts in this set? | The diameter of the U-bolt for the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 is 9/16". |
Bearings for 7,000 lb Dexter Axle and is Press Needed to Install
what size bearing fits a 7000 lb dexter axle. also do you need a press to install into the hub. | For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer...
Replacement Fan Recommendation for the MaxxAir 4700K
Hello, I have a maxxair model 4700k, can I replace it with the maxxair plus 10 model, thank you. The complete unit I am looking for the 4700k model that I find nowhere | Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent...
Filter Your Search
Contact and Help