Recommended Rear Suspension Enhancement For 1990 Ford F-250 W/ Curt Gooseneck Hitch
I have a 1990 F-250 HD standard cab with the overload springs and a curt hide-a-ball gooseneck. Will there be any installation issues or special mods needed for me to add this airbag system or a different one to my truck? My trailer grosses...
What Material is the Replacement Mirror Head for CIPA Deluxe Door Mount Made Of
Im looking for this mirror with a metal housing. Ive already got a chrome-plated plastic one with cracks on the base. The description says Heavy-duty reflective plastic which sounds like the body of the mirror is plastic, not metal | The Replacement...
How To Determine Fit of the Derale Fan Spacer Kit for Belt-Driven Fans On a 1987 Ford F-150
will your 3.5 cooling fan spacer fit my 1987 f150 5. 0 | I do have a way for you to confirm fit of the Derale Fan Spacer Kit for Belt-Driven Fans part # D31551 but I do not have any way to do this for you. Therefore, you will need to make sure...
Converting An Inverted Fifth Wheel Trailer Hitch To Gooseneck Hitch
I just redid a 2001 Adam stock trailer thats a goose neck, I just picked up an 89 F250 with a pop up kingpin hitch in it. My question is, can I out the goose neck tube on the trailer for an inverted 5th setup on the trailer? I know you can...
Bearing Kit For 2016 Heartland Cyclone 4200
I have a 2016 Cyclone 4200 HD. I want to verify which bearing kit I should purchase for this triple axle toy hauler. Thanks! Robert | We have the exact kit you need to replace your bearings, races, and grease seal on your 2016 Heartland Cyclone...
Width Of A Truxedo Soft Roll UpTonneau Cover For A 1987 Ford F-150
distance between outside of rail side to side? | There is no way to get the exact measurement of the TruXedo TruXport Soft, Roll-Up Tonneau Cover Item # TX238101 without having one on hand to measure. I contacted Truxedo to see if they have...
Trailer Wiring for 1986 Ford F-150 that Uses Spade Connectors for Connection
I have a 1986 f-150 short wheelbase truck. The trailer wiring underneath the bumper has spade connectors, and all I can find is pin connectors. Which are yours?? Thanks. | For a 4-way wiring kit that fits your 1986 Ford F-150 that uses spade...
Bike Rack Recommendation for Carrying 60 lb Bike at Rear of Travel Trailer
The Thule EasyFold literature states it shouldnt be used on the back of a travel trailer. However, I need a bike rack with a frame mount that will accommodate two step thru e-bikes weighing 60 pounds each. I want to have installed the Curt...
Do All 7-Way Sockets Have Tab to Hole 7-Way Plug in Place
Having to replace socket on my F250 due to the center of the cover with the lug that engages the plug to hold it in broke out. I’m assuming all socket lids have a similar tab to engage the plug to prevent it from vibrating out, but I wanted...
Does Pro Series 5K Square Drop Leg Trailer Jack Get Welded Directly to the Trailer Frame
I do not see any type of weld plate in the pics. Do you just weld the square channel of the jack to the frame or is there a plate? Thanks | For Pro Series square drop leg trailer jack # PS1400850383 you will just weld the outer square tube to...
Option to Install Trailer Wiring on 2000 International 3800
Hi I have a 2000 international 3800 school bus and I need to hook up trailer lights do you have something? Thank you. | While we don't have a custom fit trailer wiring kit that would fit your 2000 International 3800 you could use the part #...
Dimensions of Demco 5th Wheel Adapter for B&W Gooseneck Hitches
Can i get dimensions of this? Especially from center of the hole to the edge of the rails? | I went out and took some measurements of the Demco adapter, part # DM6140. The total width side to side is 36 inches and from front to back is 27-1/2...
Availability of 5th Wheel Tailgate for 1986 Ford F-250
I am looking for a 5th wheel tailgate to fit a 1986 Ford 250. Do you sell one? Thank you. | I do have a potential solution for you, however we don't have a traditional 5th wheel tailgate available that's designed to fit your 1986 Ford F-250....
Recommended Front Mounted Trailer Hitch For A 1984 Ford F-150
I have a 1984 Ford F-150 four-wheel drive I need a front hitch cannot seem to find it. Maybe the back hitch will also fit the front?? Please help me out. | For your 1984 Ford F-150 I recommend the Draw-Tite Ultra Frame Service Body Trailer...
How Does Draw Tite Hitch for 1986 Ford F-350 Install
looking at a hitch for an 1986 f350 dually. all these options appear to mount on TOP of the frame, vs in the factory location where the bolts go thru the side of the frame. perhaps your descriptions are a bit off or the photos of the hitches...
Will the Universal Wiring Harness # 22551 Fit on a 1985 Ford F-250
1985 Ford F-250 tows a horse trailer and recreational trailer. Identical problem with both trailers, so suspect the truck. Lights on truck work fine. Running lights, turn indicators work on both trailers. Brake lights do not work same wire,...
Installation Instructions for Reese Universal Base Rail Kit on 1989 Ford F250 Long Bed
Where can I get a video on installing the RP30035? Also maybe instructions for a 1989 F250 long bed?? Now does anyone know how far the front rail is from the front edge of the bed of the truck and how far the back rail is from the back edge...
Instructions and Measurements for Installing a 5th Wheel Hitch in a 1986 Ford F-250 Long Bed
Hi I have a 86 f250 long bed and bought a 5th wheel hitch and lost the instructions before installing it in my truck and was wondering if you could help with the measurements from the rear of the bed to the front of the rail on the rail closest...
Curt Gooseneck Hitch Recommendation for a 1988 Ford F250
Will this work with a 1988 ford f250 4x4 truck | For a Curt gooseneck hitch setup for your 1988 Ford F250 you would want the Curt Goose 2 Gooseneck Hitch part # C630-636. The Curt Folding Gooseneck hitch part # C-52 could also work if you use...
Recommended Trailer Hitch Receiver for 2017 Winnebago Winnie Drop 170S
I have a 2017 Winnebago travel trailer, model 170s. There is no rear bumper and I’m wondering if I can install a receiver hitch to the frame so I can carry a large cooler at the rear of the trailer. Thanks. | For your 2017 Winnebago Winnie...
What Style of Trailer Connector is Recommended for the Mounting Bracket # tr20046
I ordered 5 pin 20046 and the connector just falls through the hole. | The Mounting Bracket # tr20046 that you referenced is designed to used with 5-way flat connectors. You didn't say what harness you have, but it would need to be a 5-way like...
Does Curt A30 Fifth Wheel Hitch Fit Same Rails as A25
Hello, I currently have an A25 fifth wheel on my truck and a friend wants to buy it and I will upgrade to a A30. Will the existing Curt rails need to be relocated or will the A30 right in. Thanks, | The Curt A30 part # C66HR does fit the same...
5th Wheel Trailer Hitch for a Flatbed 1990 Ford F-250
I have a Reese 14k 5th wheel hitch. What is the railing kit I need to mount it in my, 90 F250 lariat flatbed pickup. | Flatbeds are unique in that the bed is further from the frame than on a regular truck bed. The installation kits are not designed...
Recommended RV Cover For A 2015 Heartland RV Cyclone 4200 5W Toy Hauler
what cover would fit my 2015 cyclone toyhauler | The length I'm seeing for your 2015 Heartland RV Cyclone 4200 5W Toy Hauler is 44' so I recommend the Classic Accessories PolyPRO 3 Deluxe Extra Tall 5th Wheel or Toy Hauler Cover - XT Model 7...
Filter Your Search
Contact and Help