How To Find Out What Pin Box You Currently Have To Determine A Correct Replacement
Looking to replace the stock pin box on my 2020 cyclone 4006 with the flex air and want to make sure I get the right model. | The Trailair Flex Air 5th Wheel Pin Box # LC369535 you mention will replace Lippert 1621 pin boxes, so if you have...
Trailer Right Brake Light Goes Out with Left Turn Signal and Brakes On
So I got the Curt trailer lighting kit for the car and a trailer light kit. So the issue Im having is that all light functions work exept when the left signal is on with and without the lights on and the brakes are on, the right light turns...
Measurement of Demco Recon Base
What is the base measurement | The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045 base measures 28 inches front to back and 30-1/2 inches side to side |
Lowering Exhaust and Using Fishwire to Install a Trailer Hitch on a 2013 Dodge Avenger
Hello, I would like to order and install a hitch on my 2013 Dodge Avenger, however your instructions state the exhaust must be lowered, and your videos and instructions are not really clear on exactly how to lower the exhaust? Ive looked under...
Will Fan-Tastic RV Roof Vent Replace Vent of Heartland RV Cyclone
I have a powered lift fan in my RV already. There is a wall switch that when turned on opens the powered lift. The unit has a dead man switch built in. When the lid is opened enough to ground the switch the fan will turn on. The unit has a built...
Where Does Block Heater on 2012 Dodge Avenger With 3.6L Engine get Installed
Does it get installed on the RL or the RR? And does the coolant need to be drained? | On your 2012 Dodge Avenger, the Kat's Heaters Custom Fit Engine Block Heater # KH11814 will be installed in the RL position that you see in the accompanying...
Trailer Hitch and Wiring for a 2013 Dodge Avenger SXT
I saw your answer for the R/T with dual exhaust. I assume this also applies to the SXT, but I want to be certain before I order. | Yes, the Draw-Tite trailer hitch # 24871 fits all models of the 2013 Dodge Avenger including your SXT. I have...
Will the Hopkins # HM11142274 Wiring on a 2013 Dodge Avenger Work with a U-Haul Trailer
Is this harness compatible with a Uhaul Trailer are the connectors the same or would I just need to get a adapter of some sort. | As long as the U-Haul trailer has a 4-Way Flat connector then yes, the Hopkins Plug-In Simple Vehicle Wiring Harness...
Does Installation of a Trailer Hitch Void Vehicle Warranty
Does installation of this hitch on a 2013 Dodge Avenger void the Dodge warranty? | When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states,...
Bike Rack to Carry 3 bikes with a 2014 Dodge Avenger R/T V-6
Is there a class II hitch that will fit the 2014 Dodge Avenger R/T V-6 vehicle? I am considering installing a bike rack that could carry more than two bikes. I cannot believe the car would have trouble with this...I need a strong enough hitch....
Can Fogatti RV Tankless Water Heater # LSB44FR Replace Atwood GC10A-4E
Will this work as a replacement to a GC10A-4E?? | Yes, the Fogatti RV Tankless Water Heater part # LSB44FR will work great as a replacement for an Atwood water heater GC10A-4E. |
Parts Needed to Tow Trailer with 2013 Dodge Avenger
I need to tow my motorcycle it wheight approx 500 lbs and I need the trailer hitch for the 2013 Dodge Avenger will this tow the bike and not scrap on the road? I need to haul the bike 1800 miles thanks! | If you had a small trailer for your...
Suspension Enhancement Fit For 2004 Coachmen Freedom Motorhome 314SO
Your specs say it will fit my 2004 freedom series class c with gmc frame and engine. My question is, I do have 7inch between frame and tires is there any other heads up you can offer before I purchase? | The SumoSprings Maxim Custom Helper Springs...
MORryde X-Factor Crossmember that Fits MORryde CRE3000 Trailer Suspension
Will your UO21-015 MOR Ryde X-Factor Adjustable Crossmember fit my MorRyde CRE 3000? | MORryde has a version of the X-Factor Crossmember that was designed to work with the CRE3000 you have with the part # MR33WR. |
For a 2008 Dodge Avenger is the Hidden Hitch the Brand Name or is it Hidden
Is this called hidden hitch because it is hidden, or that is the brand name? | You are correct Hidden Hitch is the brand name of the Class I hitch, part # 60288 (no longer available), for your 2008 Dodge Avenger. All of the hitches for the Avenger...
Trunk Mount Bike Rack Recommendation for a 2013 Dodge Avenger SXT with Rear Spoiler
Looking for a Bike Rack for my 2013 Dodge Avenger SXT with rear Spoiler.Looking for a rack for 2 Bikes only.Thanks. | The trunk mount bike rack that I would recommend for your 2013 Dodge Avenger SXT with the rear spoiler is the Hollywood Racks...
What Grade are MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles
What is the grade of the bolts? | The MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles # MR66ZR are grade 5 bolts. They have a thread pitch of 1/2-20 and maximum torque of 70 ft-lbs. |
Dexter Self-Adjust Electric Brake Fit For 2016 Heartland Cyclone 4200 Toy Hauler
Hello, I have a 2016 Heartland Cyclone 4200 triple axle that is in need of brakes. Can you specify which Dexter self adjust brake kit I need? Thanks | Absolutely; the correct Dexter self-adjusting electric trailer brakes that fit your 2016...
Availability of 2" Hitch Receiver for a 2013 Dodge Avenger
I need a hitch with a 2 in hole not a 1 1/4 hole | The only trailer hitch receiver size available for your 2013 Dodge Avenger is 1-1/4" like what you find with the Curt # C11133 and Draw-Tite # 24871. Out of these 2 I recommend the Curt because...
Right Turn Signal/Brake Light Wire on Trailer Wiring Harness Hot All the Time on 2009 Dodge Avenger
2009 Dodge advenger Have tested the four way flat connector at the trailer hitch, OUTCOME: White wire ground: OK Brown wire running lights hot only with headlights...
Recommended Hitch Receiver for 2009 Dodge Avenger with Cargo Carrier
i want to get a 2inch receiver hitch for this vehicle, i am going to use it only for a aluminum mobility scooter rack, the rack says to use either a class 3 or 4 hitch. it is a Haul master 500lb capacity mobility wheelchair/scooter carrier....
Determining If Dexter Heavy Duty Suspension K71-360-00 WIll Fit 2008 Heartland Cyclone Toy Hauler
Will this kit fit a 2008 heartland cyclone 5th wheel triple axle toy hauler? It has lippert 5200# spring over axles under it from the factory. I forgot to measure the axle spacing before I placed it on cribbing, with the suspension hanging and...
Selecting Correct Ball Mount for Use with Class II Hitch on 2010 Dodge Avenger
How do I know what height drawbar to get and what length? They have different heights and different lengths. Do you have to measure to see which one to use? | Your 2010 Dodge Avenger can be fitted with either a light-duty 1-1/4-inch Class I...
Is Temporarily Lowering the Exhaust Required to Install a Trailer Hitch on a 2008 Dodge Avenger RT
My Avenger is an RT with dual exhaust. Will this hitch fit with no problems? Im concerned with having to lower the exhaust system to install. Thanks | The Draw-Tite Trailer Hitch, # 24871, will fit on your 2008 Dodge Avenger RT. You will have...
Filter Your Search
Contact and Help