Troubleshooting Passenger Side Blinker Not Functioning on Trailer Wiring
Hello my problem is that when I have a trailer that everything works on my other truck hooked up to my f250 99’ the running lights work , the brake lights work and only the driver side blinker works. The passenger side blinker doesn’t work....
Can a Trailer Hitch Pin Lock be Used with the San Diego Chargers Hitch Cover # HHCC2024
Does the hole go thru both sides so that a locking pin can secure this to the hitch? | Yes, the hole does go through both sides on the Chargers hitch cover, # HHCC2024. For a hitch lock I recommend # e98880 to secure the cover and deter theft....
Will the Steelers Trailer Hitch Cover # HCC20176XCHMP Fit a 2008 Chevy TrailBlazer
does this hitch cover fit a 2008 chevy trailblazer | The Steelers hitch cover, # HCC20176XCHMP, is designed to fit 2 inch trailer hitches. If the factory hitch on your 2008 Chevy TrailBlazer is a 2 inch then the cover will fit. To secure the...
Recommendations for a Trailer Mounted Utility Light for Night Boat Docking
I am looking for a backup light to go on my boat trailer. I plan on mounting it near the tongue to light up the area behind the trailer as well as the boat area to make loading after dark easier. My thought is to wire it into the tail light...
Replacement Matching Tail Light for Peterson 440-15 Trailer Tail Lights
Need right side complete light assembly Peterson 440-15 | The trailer tail light you are looking for is # 432200. I have included a link to some videos that might help with installation. The matching left hand side is # 432400. |
What is the Diameter of Replacement Trailer Tail Light Lens # 415-15R
What is the diameter of this lens? Couldnt find a reference to that. | I went out to the warehouse and pulled replacement lens # 415-15R. The lens is 4-1/4 inches in diameter. I have included a picture showing this dimension. |
Lights for the Light Guard # LG440NP Mounting Bracket
HOW DOES IT LIGHT UP THE LICENSE PLATE AND SIDE MARKER. OR IS THERE ANOTHER PART # . THANKS | The Light Guard # LG440NP is actually made for the Peterson Square Lights # 432400 (Left Hand) and # 432200 (Right Hand). These lights come with...
Availability of Command Replacement Brake Lens off 1999 Gulfstream Ultra C-Class Motorhome
I have broken a lens to a brake light on my 1999 Gulfstream C-Class Motorhome. Its SAE 1st P2-93-DOT code on there and Ive contacted Command as well but checking to see if I can find the replacement here. Center of screw hole to center of...
Flat-Towing Parts Needed for 2016 Honda Fit with Manual Transmission
What parts are needed to flat tow a 2016 Honda Fit with Manual transmission? | We do offer base plates for the manual transmission 2016 Honda Fit such as Blue Ox # BX2261. In addition to base plates flat towing requires safety cables, a wiring...
Replacement Trailer Light Lens that Measures 2 inch by 2-3/4 inch
What are the dimensions of this lens cover ? Im looking for one 2inch wide by 2.75inch tall. Thank you | Sounds like you are looking for the part # 55-15R as this light is 2 inches bye 2-3/4 inches. From mounting hole to mounting hole this...
Which Style of Tow Bar Lighting is Easiest to Install and Use
Isn’t it easier to just use magnetic trailer lights for towed vehicle? | When flat towing a vehicle magnetic tow lights like the Peterson kit part # PE26UR really are the easiest solution to deal with. It's just a matter of plugging them in...
Does the Peterson m116a Clearance Light Come in Red?
Does the m116a clearance light come in the red lens? | I checked with Peterson and confirmed they do not have the # m116a clearance light in the red lens at this time. The dimensions on this light are 5-3/8" x 1-13/16" so if you we are trying...
Can the Lock Clip be Removed from the Hitch Cover to Use a Trailer Hitch Receiver Lock
I am wanting to purchase the St. Louis Blues 2" NHL Trailer Hitch Receiver Coverinch and it looks like it has clips where a lock would go. Do those remove and would the following lock work with it Trailer Hitch Receiver Lock - Flush Design...
License Plate Light for Camper Special 1969 Ford F-250 Bumper
PM436 will this fit a camper special 1969 ford f-250 bumper 3 1/4 long | The Peterson License Plate Light # PM436 referenced in your question has mounting holes that are 3-1/2 inches apart on center. If you are needing a light with a 3-1/4...
Recommended Hitch Lock Pin for the State of Texas Flag Hitch Cover
Do you have a lock that goes with the hitch cover I just put in my cart? Texas flag on shape of the state. | For the State of Texas Flag 2 Inch Trailer Hitch Receiver Cover, # HTCC11805, I recommend the Trailer Hitch Receiver Lock, # e98880. This...
Replacement 12V DC Power Plug Work on Portable Air Compressor
The device I use to inflate the tire pressure uses my cars battery through cars cigarette lighter. Its plug needs to be replaced. Does the A-200 Replacement 12-Volt DC Power Plug will serve the purpose? | The Replacement 12-Volt DC Power Plug...
Are 4 x 2 Oval Waterproof LED Clearance Lights Available?
I have a boat trailer that goes into water to unload boat with marker lights very similar as your Peterson Amber Oblong 135A or oval. Mine measures 4in x 2in x ? The incondescent bulbs are not waterproof and have rusted out. Do you have a LED...
Is The Peterson Amber Reflector Have SAE-A Code?
What is the SAE codes on item: Peterson Trailer Lights - B484A. I need SAE-A. Thanks, | The SAE just means it has passed Society of Automotive Engineer Guidelines and the letter indicates what it's function is. In this case, the Peterson Amber...
Can 14 Gauge Wire be Used with Trailer Stop/Turn/Clearance Light # 432200
Hello, Im looking for a set of trailer lights to replace my old ones. I am looking to use the wiring I already have installed on the trailer so, Im only searching for the light, light housing units for both right and left sides. My question...
Troubleshooting Pop Up Camper Light Signal Working With One Vehicle and Not Another
Two identical tow vehicles with identical connectors - There is power to the right tail light/brake light registering on the LED tester on both tow vehicle connectors. However, when one vehicle is connected to the pop up camper the right tail/brake...
What is the Center to Center Mounting Hole Measurement for Peterson Clearance Light LED 168A
I need to know what the bolt center is on this light. I am looking to replace a bulb version of this light with the LED. The problem is my pace is limited on width. I have a max of 1 inch. the light I am replacing has bolt holes at 2 3/4...
Is the Texas Tech Red Raiders Helmut 2 Inch Hitch Cover Made of Metal
is this hitch cover all metal or is some of it plastic? thank you | The Texas Tech Red Raiders Helmut 2 Inch Hitch Cover, # HHCC2362, has a metal face but the base is ABS plastic. I would recommend using a locking hitch pin like the etrailer...
How Can the San Francisco Giants Hitch Cover fit a 2 inch and a 1-1/4 inch Hitch Opening
I have a class I hitch - 1 11/4inch How can this cover fit both 1 1/4inch and 2 | Both San Fransisco Giants hitch covers we carry, parts # HCC2124 and # OHCC2124, are designed to fit 2 inch trailer hitch receivers only. |
Can the Lights on an 83 Inch Wide Trailer Be Considered as Reflectors
on my 83 inch wide trailer I understand I need 6 reflectors 2 on rear -4 on sides can the lights be considered reflectors or do I need reflectors separate from lights. Thanks for the help | The side marker or clearance lights on your trailer...
Filter Your Search
Contact and Help