Replacement Converter Options for a Magnetek 900 Series Model 930 Converter
Do I need to replace my 900 Series 930 Model, converter it is humming pretty loud, | Some buzzing or noise from your converter is normal, but it sounds like it has increased significantly which could be a sign that there is something wrong internally...
Which 5th Wheel Frame Brackets Fit A 1981 Ford F-250 8 Foot Bed?
Need to know what 5th wheel frame bracket fits my 1981 f250 8 ft bed | For your 1981 Ford F-250 with the 8' bed I recommend installing the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th Wheel Hitches #...
Tire Chain Recommendation for Tire Size 285/70-17
I’m searching for tire chains that will fit 285/70/17 tires, essentially 33x11. Do you have options that would work with this size tire? I have purchased items several times from etrailer over the years and have had positive experiences. Thanks,...
Recommended Class IV Trailer Hitch Receiver For 1984 Ford F-150
need correct model number of curt class 4 trailer hitch to fit 1984 f 150 my frame width is about 37 1/4 inch wide | For a Class IV trailer hitch receiver on your 1984 Ford F-150, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class...
What Are The Measurements For The Snap-In RV Curtain Carriers?
Im trying to see if it will fit the track on my RV as it is an obsolete model, these look like might do the trick but not sure as there’s no info about the actual size of the item. | I went out to the warehouse and measured the Snap-In RV Curtain...
What is the Pin Shaft Length and Diameter on the Replacement Locking Pin for Curt Gooseneck Hitches
What is the length and diameter of the pin shafts on this item? | I contacted the manufacturer about the length and diameter of the pin shafts on the Replacement Locking Pin for Curt EZr and Original Double Lock Underbed Gooseneck Trailer Hitches...
Parts Needed To Install 7-way Connector In 1984 Ford F-150 4x4
What do I need to hook up a 7 way trailer harness?1984 F 150 4x4 | The 7-Way Pre-Wired Car Connector, 7' Lead # 20023 you were looking at is designed to go in the bed of your 1984 Ford F-150 4x4 and splices in to the factory 7-way connector. If...
Recommmended Replacement Air Conditioner For a Coleman Mach Air 7300 Series
I have 94 7300 rooftop air conditioner I need to replace unit where do I ordee | For your Coleman Mach 7300 Series, I recommend checking out the Advent Air Replacement RV Air Conditioner for Coleman Setup # ACCOL150. This air conditioner...
Will the Stromberg Carlson 100 Series 5th Wheel Tailgate Fit a 1986 Ford F-350
Will vg 100 fit 86 f250? | I checked with Stromberg Carlson and they only confirm the Stromberg Carlson 100 Series 5th Wheel Tailgate part # VG-100 back to 1987. This could be due to lack of testing or incompatibility. There was a generation...
Troubleshooting Lighting That Stopped Working on 1987 Ford F-250 After Radio Shorted
I have a 1987 F250 super duty my radio fried the other day and noticed my brake light was all that was working now their not working ether but I do have highbem headlights and dash lights but no blinker,hazards,running,reverse,lowbem headlights...
Which Class V Bumper Fits a 1984 Ford F-150 with 8" Deep Drop Bumper?
I have a 1984 F150 4x4 and the bumper is 8 inches with extending frame mount. Which class 5 hitch do I need? | Roger, I can't quite tell from the picture anything about the frame rails on your 1984 Ford F-150 4x4, but the Curt # C15511 will...
Can Landing Gear Set RVLG-8000 be Converted to a 2-Motor System
Can you set this up to work individual by adding a separate motor? This is the second time I have used the new landing gear and im having a hard time hitching and unhitching due to one jack is not traveling the same as the other. I did not have...
Filter Your Search
Contact and Help