!Stampede Travel Trailer  x   >   !New Beetle  x   >   !Rodeo Sport  x   >   Pro Series  x   >  

Are there any differences between the dual cam sway control from draw-tite 26102 vs Reese 26002? I have a draw-tite round bar head assembly rated 10,000# with 1000# bars and towing a 6000# TT with 980# TW if any of that matters. | The Reese...

Hello Need technical help... Have bought from you folks before with excellent results and its no wonder folks at the Pop Up Portal recommend. Would like to ask a question related to weight distribution hitches. With the unusual nature of...

i have a gooseneak and i am buying a fifth wheel rv. is this coupler the same as the $400 gooseneck to 5th wheel adapter. i dont see in the pics how it holds the 5th wheel. i just want to make sure this is safe to use to tow my mobile home with...

Can I flip the Shank upwards to make my trailer level and also, does there need to be any kind of angle on the hitch that needs to be set for towing? Or does it have to be straight up and down? Kinda hard to explain. Im sorry | I know exactly...

With this fit my 2015 f250 platinum? I also have a puck system in my bed of the truck. | I do have a solution for you but the Pro Series 5th Wheel Trailer Hitch with Rails and Installation Kit # PS30132 isn't your best option. Since your truck...

Is it required by law that the break away switch function? | Yes, a towed trailer that has brakes must also have a functioning breakaway switch/battery system so that in the event of an accidental uncoupling of the vehicle and trailer the brakes...

I see the 63070 adjustable hitch has 3 pins, Hitch, Shank and Spindle. It was a little ambiguous in a previous response to securing the ball mount to the vertical shaft. Can the 3-headed ball mount be removed from the assembly entirely if...

Hi, I purchased this setup from you about 6 years, two trucks and one camper ago. With my current tow vehicle Im seeing the need for a slightly bigger drop than can be achieved with the stock shank. Looking at the Curt C17132 as a solution....

i have 2008 ford fx4 truck just bought toy hauler that has 1126 hitch weight. need weight distribution and sway bar.what do you recommend.and do you have instock | We have quite a few options available for your 2008 Ford F-150 FX4 to pull your...

When towing should it show gain Everytime you break. | With the Pro Series Pilot 2-6 Brake Electronic Brake Controller # 80550 being a time delayed brake controller, there will always be power once the brake is pressed. With that being said,...

Hello, We have a Reese fifth wheel hitch and the head needs replacing. The number is Reese #30056 Pro-Series 15,000 lb. Will your Reese # 58165 16,000 lb. fifth wheel hitch head fit mine? I will also need the handle. Thank you | Yes. The...

I have a Draw-tite Round Bar Weight Distribution System for my camper and lost one of the bars. It is Draw-tite Part # 81519 1000lb bar and wondering if you have any or equal to that will work in place of. Thanks | We sell the bars as a pair...

In the description it says Jack has 10-1/2inch retracted height. Where exactly is that measured from? I assume it is measured from the bottom of the foot plate to somewhere on the pipe mount. Any help would be greatly appreciated. | The 10-1/2...

i bought a 2012 dodge crewthe box is only 5.5 feet long | The only way that a fifth wheel hitch can be used with a 5.5 truck bed would be to use a Sidewinder Replacement Pin Box. The Sidewinder replaces the OEM pin box on your fifth wheel, and...

I have a 2011 Chevy Equinox, V6 FWD. Rated at 3500 lbs towing capacity . We just purchased a 2016 Starcraft AR-ONe 14RB travel trailer. I havent taken delivery of it yet. I expect the travel trailer will need a weight distribution hitch....

do you have a replacement handle for a Reese #30047A slider thanks | The Reese 5th Wheel Slider Hitch complete head assembly you mentioned, # RP30047A does have a separate handle replacement. This separate replacement handle is part # 58055....

looking for a receiver that has a wheel that will remove some of the tongue weight from the vehicle, pulling my RV trailer with riding mower, old trailer had #500lb tongue weight and had no problems, new trailer will have #800lb and not wanting...

I am looking for some information on the PS1400950376, 10,000 lb jack. Can you tell me the thickness of the housing and what is the warranty if any on this. thank you | If you check out the diagram that I attached for the Pro Series Square Jack...

I’m looking for a fold up jack with wheels to fit on a trailer - question is how much clearance do I need for the jack to fit when stowed? | When measuring the Pro Series Snap-Ring Swivel Marine Jack # PSEJ10000101 fully collapsed , you will...

I have an 08 Yukon XL towing a 91 Scotty 17 foot camper. Any time I get over 60 mph or a semi passes, I get the dreaded death wobble. Im looking to get things stabilized so we can enjoy the trip. The gross TW is 700 #s and the frame measures...

The plug next to the trailer hitch is installed but the wires only go to a plug that is not connected to anything. What do I need to do to install a brake controller? | Since you have a 7-Way you will only need a few more components to complete...

What size jack do I need for a 6x12 cargo trailer single axle | For a small trailer like what you have the Pro Series Snap-Ring Swivel Marine Jack # PSEJ10000101 would do well. This jack can fit trailers with up to 3 by 5 inch frames and has...

Hi I have a bit of a dilemma. I want to choose correct WD System for Subject trailer vehicle combination. The trailer has an Empty Weight of 5360 Lb. and Empty Tongue weight of 630 Lb. Trailer GVWR is 7500. I want to purchase a Reese...

I have a 2010 Nissan Pathfinder. I need to pull a camper about 350 miles. I need to know if I can do it safely, and what I would need to purchase to do so. I have included the specs below. Im thinking a WDH would be the best way to go, but Im...