Replacement Trailer Jack for Viking Legend Pop-Up Camper
I have a 2004 Viking Legend 2485ST pop up camper, and my top-wind trailer jack with 8 wheel needs to be replaced. The jack uses a clamp to hold the 48mm 1.9in OD tube, and it must be unclamped and retracted upward to get the wheel out of the...
Recommended Roof Rack for 2000 Viking 2485st Pop-Up Camper
I want to confirm which roof racks will fit a 2000 viking 2485st Pop Up camper. One you sell is the SportRack Pop-Up Camper Roof Rack - Square Crossbars - Steel. Can you confirm it would fit my camper and are there others available? We are...
Recommended Replacement Trailer Connector For 2006 Viking Pop Up Camper
Looking for a trailer hitch wiring for a Viking pop up camper 2006. As we were pulling our trailer the wiring case dragged on the pavement and wore a hole in it. The wires are exposed and lights go on and off. | I would be happy to recommend...
Shouldn't Hopkins Square 6-Way 37995 Come with Thicker Gauge Wiring
Hi There, RE product Item # 37995 I believe the specs given are that the wires are 18 gauge. Shouldnt some of the wires be thicker than 18 gauge, maybe 14 gauge or even a 12 gauge. I believe the electric brakes need something thicker. Please...
Recommended Replacement Jack for 2300 lb Pop-Up Camper
Hello, I had a trailer jack with a wheel that came with the 2,300 lb pop up trailer, this jack broke two days ago. I am looking to buy one but all of them say max capacity 1,500 Lbs. am I ok with a jack like that ? did I explain myself ?...
Replacement Bearing Kit for a Dexter D4620466 Torflex Axle on a 2000 Viking Legend Camper
Looking for a wheel bearing kit for a 2000 Viking legend With a Dexter axle ez lube torflex sn D4620466. The part number on both bearings was worn off. Any ideas? | I spoke to my contact at Dexter about your Torflex axle with the serial number...
Availability of Lock N Roll and Dual Ball Adjustable Ball Mount with 4 inch of Rise Drop
I want a LOCK N ROLL hitch with about a 4-6 adjustable and rise. Is it also possible to get a 1 7/8 and 2 ball that will work with this system so I can change them out with the different trailers I have? | The Lock N Roll Articulating Hitch...
How Tight Should Spindle Nut of Timbren Axle Less Kit be
Hi there. What size socket is required for the Timbren Axle-Less Trailer Suspension System - 4inch Lift Spindle w/ Brake Flange? Thanks | When installing spindle nuts like what comes on the Timbren Axle Less Kit # TASR5200S03 Timbren recommends...
Filter Your Search
Contact and Help