!Stampede Travel Trailer  x   >   !Grand Vitara  x   >   !Synergy Motorhome  x   >   Master Lock  x   >  

I dont know the manufacturer of the coupler on my travel trailer, how do I know this will fit? Travel Trailer is a 2012 Keystone RV Cougar X-Lite 30RLS. | I did a little online research and found that Master Lock Trailer Coupler Lock, # 379DAT,...

I want to attach a bump step to my 2023 Hyundai Tucson Hybrid no towing will be used . So I need a hitch adapter that does not extend out I want the bump to be close to the rear of vehicle Thanks | There is one option for a hitch step for your...

If a buy mutliple locks can they be keyed the same? | I spoke with my contact at Tow Ready and the Gorilla Guard Coupler Locks, # 63227, cannot be be keyed the same. We do offer the Master Lock Coupler Lock, # 377DAT, that can be keyed alike...

Hitch Lock for a Alpha Wolf 33BH-L. What do you recommend in a moderately price range | I recommend the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT for your 2022 Forest River Cherokee Alpha Wolf 33BH-L. This lock set...

Do I drill new holes in the extension hitch for the set screws? Approximately where to drill and do i drill through one side? | The B&W Extend-A-Goose Gooseneck Coupler # BWTEXA4200 should not be drilled into. The coupler sleeve is required...

Hello, do you have something LIKE a lockable hitch pin that is only 3/8inch diameter? Im not wanting to use this on my hitch so dont limit your search to something for hitch. I just need something that is 3/8 diameter, lockable and about 2.5-3.0...

Does this winch have a brake for trailering aboat on trailer?. Does it lock for safety? | Yes, there is a brake on the Master Lock Winch # 2953AT winch that you referenced. Basically, the brake will always be applied when powering in and will...

Hi there, I already have a locking draw bar pin and a lock for my trailers coupler, but whats to stop a thief from just unbolting my ball from the draw bar and stealing the trailer? Do you sell anything that locks the 2inch ball to the drawbar? Thanks....

I want to buy this flat mount hitch BD4425000317 but the reason is because I need a good hitch lock as well. I have the Atwood style and cant seem to get a lock for it. Do you offer a really good lock for the BD4425000317 as well? | I went out...

What coupler pin locks both pin style lock and padlock fit this model? The extra width of the coupler latch has made it a bit unique. | For your Atwood Channel Tongue Trailer Coupler 80060, I recommend the Fastway Universal Trailer Coupler...

How can I get a replacement cable lock for the Yakima front loader | I do have a way for you to use a replacement cable lock on your Yakima FrontLoader # Y02103, but there unfortunately aren't any replacements that will fit on the arm like what...

What is the dimension of the overall length of the non key . I have a limited amount of space on the one side and did not see that measurement on the site. | I recommend using the Master Lock 1-9/16" Wide Solid Brass Body Padlock # ML140DLH...

Hello, Would like to know which Hitch would fit my Sonic Sedan LT 2012? | The Curt Trailer Hitch Receiver # C11240 is the correct receiver for your 2012 Chevrolet Sonic LT Sedan. This class I hitch is rated for 200lbs of tongue weight and towing...

Can you tell me the overall weight of this box? Planning on storing it, and hand tools, on a piece of plywood covering the rear of my 2012 Jeep Wrangler? Would I need a brace underneath the plywood to keep from major sagging? | Your Jeep...

hi, i need to modify a 2015 cx-5 for a trailer. im thinking of adding that curt class iii hitch c13127 that you showed in your very helpful video. is the hitch all that needs to be added or are there wires or whathaveyou that i would also...

Is it possible to get to Master Lock 2866dat locks that are keyed alike? I need one for the receiver in the car and the second one for a hitch the same vehicle. I would like to use the same key for both. | There are two different sized pins...

I have an STC-V211 on order from your company. I will need to lock the unit to the trailer when parked at the boat ramp while I am out fishing. Can you recommend a model and part number for a locking pin to accomplish that requirement? | We...

Will the master lock 3784 dat fit on a casita independence deluxe? | I looked up pictures of what the coupler on a Casita Independence Deluxe looks like and the Master Lock coupler lock part # 3784DAT that you referenced would fit and work well...

I am looking for couplers and latch locks for my two 2inch receiver trailers. I would like all 4 locks to be keyed the same. The kit below would fit my needs if I could get two kits, both with the same keys. 3794DAT | The Master Lock Trailer...

Have a 2021 NV2500 Nissan 6cyl. Its a high roof van. No trailer to tow ever! Its a cargo van for personal used. Only items I was looking for was a tow bar, extension high/low bar, and a cargo carrier basket with side rails more than 5.5 inches....

I like BX88351 or 3481213 that type of lock but I’m having a problem finding one of that type to fit over the flange of my trailer. I need at least 5” on inside of U shape to fit over flange 2 5/16. Can you give me a item # that will work? |...

Hello there ! We have an older master safe small lockbox that our combination which as been our combination for 5+ years has suddenly stopped working on. We have tried many different things to no avail. Can you please advise? | It sounds like...

I have a 2005 companion. Wil my head fit this base BWRVB3305 | Yes, the B&W Companion line of 5th Wheel Hitches all use the same head, which is part # BWRVC3006. So, if that is what you have then it will fit the Replacement Base for B&W Companion...

I would like to lock the hitch to the truck somehow? Its a 2016 Dodge 3500 8foot bed with the factory puck system. Is there something beefier that I can replace the little pins with besides a little padlock short of drilling the holes bigger...