!Outback Wagon  x   >   !Seaflo  x   >   !A7  x   >   Tow-Rax  x   >  

Is this end cap compatible with rails in the Buyers Products Super Track Kit? It looks like the Erickson and O Track anchors are compatible and the cross section is pretty similar in shape. | Yes, the Tow-Rax End Piece for L-Track Rails part...

My trailer has 16inch wall studs, will the mounts on this table matchup? | The mounting holes on the Tow-Rax Wall Mounted Folding Table # TWSP45HFTA are 32 inches apart on center. This means that 16 inch stud spacing will be perfect. One side...

Well any of your motorcycle wheel chocks fit a honda gold wing with brake covers. | It is not possible to say if your Goldwing with brake covers will fit, since the part that comes close to the disc is at an angle. You would have to physically...

What is the inside width, Im worried about the chock touching the brake rotors, the current one I have is 5 3/4inch inside dimension and places the rotors about 1/4inch away from the chock. 2023 Ducati Multistrada Pikes Peak | The inside width...

I have a 4x8 utility trailer with a truck rack mounted on it and I would like to add 2 LED pods onto the trailer that can be controlled VIA switch. My question is, how would I do this exactly? What power source would I use? Thanks! | Adding...

Hello, I already have two other motorcycle wheel chocks. Do you sell just the mounting hardware for the floor so that I can adapt mine? | Yes, the mounting hardware for the Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular...

Good morning, I am missing the rear tack wall in my 2001 Featherlite. I was wondering if you would have the replacement or know where I could get it? Thanks, | We do not have exact specs for those Featherlite Trailers to know exactly what they...

Hi, What size wheels will this mount accommodate? I have a jack with 5 inch wheels, most of these will only fit 4 inch I believe. LMK.... | The maximum wheel diameter that will fit the Tow-Rax Floor Jack Mount # TWSPJSTAL is 4 inches. It doesn't...

Can i use my class II hitch put a 2 inch adaptor put a motorcycle hitch haul carrier max weight on my bike 477lbs to travel about 30hrs.Thanks s | Using the Hidden Hitch 1-1/4 inch to 2 inch Adapter # 80303 would reduce the tongue weight that...

Do these tables come in a larger size? | The only size table we offer is the Tow-Rax Wall Mounted Folding Table # TWSP45HFTA that measures 45-1/2" Long x 18-1/2" Wide. I attached a review video for this table for you to check out as well. |

Should they be centered side to side and front to back? | Ideally, you would want the load to be centered side to side on a trailer. Front to back is another issue because its position on the trailer will change the tongue weight. You will want...

Im looking at the following product: Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2inch Wide Tires - Tubular Steel Can you tell me the normal amount of play on either side of the tire once the wheel is in the chock? | The Tow-Rax Removable...

I plan to use a hitch to haul either a 4X8 or 4X6 trailer for my motorcycle what receiver. What hardware come with this hitch and does the wiring kit for my Scion XB 2006 need and does the wiring have T connectors. Do I need anything else to...

what wattage of light would this be compared to a halogen? | There isn't an exact comparison but generally it would take a 420 watt halogen light to achieve the same 4,500 lumens produced by Tow-Rax Recessed LED Light # TWSPRLB2L. A standard...

Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2inch Wide Tires - Tubular Steel - Chrome There is not a listed maximum weight listed for this product. Most show what the maximum vehicle weight that can be used with a curtain product, but...

Can part #TWPH2770 be used with part #TWSPWC | Yes, you can use the mounting hardware kit # TWPH2770 with the Tow-Rax removable wheel chock, # TWSPWC. there is also a kit that comes with the chock and the hardware in one part number. It is...

I currently have 2 halogen flood lights on the outside of my Haulmark trailer. These lights tend to go through bulbs due to I believe the abuse they see when driving down the road. Would this light be something I could swap into my already existing...

Can you tell ne if this helmet shelf will mount on a 7 x 12 V-Nose enclosed cargo trailer? | Sounds like you are wondering if the Tow-Rax Corner Helmet Shelf # TWSPCHH has angled brackets on the back of it that would match the angles of your...

Can you remove the divider to to create one big shelf? Also, I have 1/2 inch plywood walls, could I just install this w/ toggle bolts and not go into the frame? I wont have anything too heavy on it.... | The divider in the Tow-Rax Double Helmet...

Looking for battery box for battery that is 6 5/16” height 5 5/16” length 3 3/16” wide Looking to mount box and battery inside enclosed trailer on wall. | We have numerous battery boxes, see link below, some are smaller than the battery size...

Do you recommend these for flat aluminum trailers to tie down atvs? | For a flat aluminum trailer tie down, I recommend the Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1 # TWSP72TA along with the...

Hello, this table is exactly what I need in my laundry room, except I need the long end to run on the depth, with the length and width being about 18-24. This table would be perfect if it can be mounted from the side rather than the back....

Will a 2009 Honda metropolitan scooter fit in this chock with hitting front fender. Thanks | I recommend the Tow-Rax Wheel Chock, # TWSPWM this wheel chock will fit tires up to 6-1/2 inches wide and is only 8-1/2 inches at its tallest point....

IF I WANTED TO TEMP. MOUNT THIS WINCH TO MY TRUCK BED, WHAT IS THE BEST WAY TO POWER IT ? | No matter where you mount the Superwinch LT2000 ATV Winch # 1220210 it does need to be powered via a 12 volt battery with a circuit breaker between the...