Can a Proportional Brake Controller be Used on a 1971 Ford F-250?
I am wondering if this unit has the inertia components that would be necessary to install it on a vehicle that does not have any computer or electronic braking components. I have a 2016 fifth wheel that has electric brakes and Id like to be...
Is There a Trailer Hitch for a 70s Ford F-250 with Flatbed
My 1972 Ford F250 is a Flatbed truck. Do you sell a trailer hitch for my truck? If you do I would like to buy one and everything else that goes with it. Thank you very much. | We do offer trailer hitch options for a 1972 Ford F-250 but as...
Socket Size Needed for CE Smith Trailer Wheel Lug Nut
Does this take a 3/4inch or 13/16inch socket? | The CE Smith Trailer Wheel Lug Nut # CE11051 uses a 13/16 inch socket. I went out the warehouse and confirmed that the 13/16 inch socket is correct for this lug nut. |
7 Pole Wiring Repair for 1991 Ford F-250 Diesel Truck
I need to fix my truck wiring for the 7-pole connector on the truck. The harness to the truck wiring needs to be replaced. It doesnt look like the typcial T-harness you prescribe for the 1991 F250 will work since its a 7-pole trailer connector....
Base Rails and Brackets Needed to Mount Demco FWH-24P SL 21 Hitch on 1969 Ford F-250
I have a 1969 Ford F-250 2wd 5.9L with a full size bed, and my hitch is an older Demco FWH-24P SL 21 Hijacker. The truck bed is virgin and has never had a hitch on it. I’d like to install a universal rail kit so I can upgrade to a different...
Will Extang CargoCleats Truck Bed Tie-Down Anchors EX1932 Fit 1975 Ford F-250
Will these work on an older Ford pickup like mine? Trying to avoid mounting the factory style cleats on the outer bedside and this looks like a good option if it fits. | Thank you for the photo of your 1975 Ford F-250. Thse tie-downs are a...
Difference Between Replacement Slide Gear Motor Assemblies # LC386322 and # LC387738
What is the difference between the Item # LC386322 and #LC387738? They look the same. I have a 1999 Thor Residence. Big difference in price | The physical difference is that the # LC386322 has a connector on it and the part # LC387738 has two...
What Needs to Install in Bed of 1979 Ford F100 to Install Fifth Wheel Hitch
How do I install this hitch onto my 1979 F100 pick up with an 8 foot bed? | To install a fifth wheel hitch in the bed of your 1979 Ford F100 truck will require you to install a fifth wheel rail kit. For that you would want the part # RP30035....
Installation Instructions for Prodigy P3 Brake Controller in 1973 Ford F-250
Just bought a p3 brake controller from you guys and am installing on a 73 f250. I wont have a lot of time to install so was hoping I could get a little advice and direction so when I get it I can hit the ground running...any help, even some...
Does the Westin Fey Bumper # 21000-92230 Come with Brackets/Hardware for a 1975 Ford F250?
Does this bumper come with brackets to fit the narrow highboyinch frame of the 75 F250 4x4? I have zero brackets on hand already. | Yes, the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Chrome Plated Steel # 21000-92230...
Will B&W Heavy-Duty Trailer Hitch # BWHDRH25122 Fit 1977 Ford F-250 with 34 Inch Frame
Will this fit the 34” frame F250 4x4? | Yes, the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 referenced in your question will fit the 34 inch frame width on your 1977 Ford F-250. This was the common frame width on trucks during that...
Will Curt Class IV Trailer Hitch Receiver Fit 1974 Ford F-250 with Standard Bumper and 34 Inch Frame
I have a 1974 F250 4x4 with the 34 inch frame and need a class IV hitch. Guys online say a Curt 14082 bolts right up but application here says no. Please advise. Thanks in advance. | The Curt # C14082 will fit on your 1974 Ford F-250 as long...
Trailer Hitch Receiver and Brake Controller Recommendations for 1977 Ford F-150 4X4
Im looking for a trailer hitch and brake controller for my 1977 F150 4x4, 400 engine, automatic and Im not sure the gear ratio. I am not sure how much weight it can tow. I was thinking it should be able to tow 6000. What hitch would you recommend?...
How Does 7-Way and Brake Controller Install in 1973 Ford F-350
Wiring diagram for wire harness and controller in a 1973 Ford F-350 .And what controller would you recommend? Thanks | For a truck as old as yours it would be pretty hard to find a wiring diagram for installing the 7-way part # 20023 but I can...
Recommended Trailer Hitch Compatible with 1968 Ford Truck
Will the Draw-Tite - FORD VANB.Y - 75315 model hitch fit on a 1968 Ford truck..? | The Draw-Tite 75315 hitch has been discontinued, but is only a fit for Ford Full Size Vans. It will not fit a Ford Truck. For your 1968 Ford Truck, I recommend...
What is Bracket Length on Lippert Components Spare Tire Winch LC159056 that Holds Wheel
I would like to use this on a old Ford F100. The spare tire has a 3 1/2inch center hole. Is the length of the holder bracket long enough? | Yes, the holder bracket of the Lippert Components Spare Tire Winch with Offset Cable # LC159056 is...
What Light Hole Dimensions Does Westin Fey Bumper Have
I would like to use my Ford OEM license plate lights in the installation on my 1976 Ford F250. What size diameter are the holes in the bumper and how long are the rectangular slots for the Westin license lights? I assume the rectangular slots...
Temporarily Mounting Trailer Valet 5X Swivel Jack/Trailer Mover on Hinged Trailer Tongue
I have the above valet and use it fine on a 63 airstream 19 footer. I was letting a neighbor use it before he bought one. He has a 17 ft Boston Whaler sitting on a slight incline. The trailer has a swivel fold away tongue. The only place...
Is the LCD Display on the Tekonsha Prodigy P3 Included in the Warranty
Does the lifetime warranty cover the LCD display going bad and bleeding in from the sides? Who covers the warranty, the seller or the mfgr? Thanks, | I spoke to my contact at Tekonsha and they said the LCD display on the Tekonsha Prodigy P3...
Compatibility of the Tow Ready 4-Pole Mounting Bracket and the Curt T-Connector Wiring Harness
Will product 18144 work with c55301? | Yes, the Tow Ready Mounting Harness # 18144 will wok with the Curt T-connector Harness, # C55301. The mount can connect at the bumper of your vehicle to mount the 4-flat plug of the Curt harness. |
Correct Replacement Motor and Gearbox for Kwikee Steps on a 2017 Thor Outlaw
I have a 2017 Thor Outlaw 37BG, My rear steps to the garage will not come out, the magnet clicks when screen door moves away from contact, the orange light is on under stairs but stairs will not come out. The Kwikee electronic module part #...
Steering Stabilizer Fit for 2020 Thor Outlaw Motorhome 38MB
looking for a steering stabalizer for 2020 thor motorcoach 38mb | I did some checking and since your 2020 Thor Motorhome Outlaw 38MB has a 26k GVWR the correct Roadmaster steering stabilizer is the part # RM-RBK25-RSSA. |
Bulldog Inner Tube Gooseneck Coupler Availability that is 4 inches In Diameter
Do you sell a trailer coupler like BD0287610300, but without the pin holes? I need one just like your BD0287690300 but will fit up in the 4 inch pipe. I guess the BD0287610300 will work but with my current set up I do not need to or never had...
Trailer Hitch Recommendation for 1970 Ford F-100 with Standard Bumper
I have a 1970 f100 with the standard chrome rear bumper..not the step bumper ..And I would like the receiver to be located right under said bumper ..Can you tell me what hitch to buy... | For your 1970 Ford F-100 with a standard chrome bumper...
Filter Your Search
Contact and Help