!Outback Wagon  x   >   !Via Motorhome  x   >   !Montclair Motorhome  x   >   Convert-A-Ball  x   >  

I have a 2015 ram 3500 long.box dually with a puck syatem. I have a b and w puck style goose neck ball with thw big handle. I also have a jayco 34 ft eagle. I was wondering if you would reccommend the converta ball adapter as i also pull a gooseneck...

Hello i have a 2013 edge se awd v6 it did not have a tow package. I installed a class 3 hitch what do you think my tow capacity would be | According to the owner's manual, the 2013 Ford Edge V6 AWD model has a 2000 lb towing capacity. It's...

Can you use this adaptor in a recessed gooseneck ball like the CM Flatbed with built in ball in box? | The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5GX1216 can be used with most recessed gooseneck hitch balls but it...

Can this be combined with a weight distribution hitch? | I do have a great solution for you, however the Convert-A-Ball Dual-Cushioned Adjustable Ball Mount # CAB-UM that you referenced cannot be used with a weight distribution system, in large...

I bought this longer shank with my weight distribution hitch just in case I needed extra . I did not need it so I am curious if I can buy a ball mount to use with it instead? | You could use the Ball Mount Adapter part # BA-1 on your Curt weight...

We have a 2009 GMC 2500HD truck with a 6 bed that has a 2-5/16 ball mount in the bed of his truck that he uses for his 5th wheel hitch. He is looking for a gooseneck adapter for that ball mount. What might you suggest? Thanks... | I recommend...

I would like an under bed mounted gooseneck hitch because I would still like to keep my bed usable but I need one that will also be capable of mounting a fifth wheel hitch to it also. I have to be able to switch it fairly easily. I move different...

I cannot locate vin number on my 8x20 food trailer and the manufacturer is out of business I have written to state and received notification that they were out of business.what do I do now to receive a vin number,so I can have it registered?I...

what is the best ball mount to use when towing a 17ft nitro bass boat with a 2005 fwd ford escape v6 dohc and what do i need to know to make this set up work best for me? | We recommend using the Ball Mount 3/4 inch Rise or 2 inch Drop,10,000...

I have a 35 ft toyhauler approx 10,000lbs. I notice some hitches are rated for 6000lbs tongue weight and 26,000gvr. Would this hitch handle the weight? thanks. | You are correct in that some gooseneck hitches have weight ratings that will handle...

I bought the hide a goose hitch from you 2 years ago and i have just bought a fifth wheel camper. Do i have to drill holes in my fifth wheel base for mounting this product.I just bought the camper and it is not here to check to see if its got...

This is for part # AMPC3. How long is the shank from the center of the pin hole to the front and/or the back of the mounting plate? How far is it from the center of the pin hole to the closest part of the support brace? How far is it from the...

We are looking to purchase a trailer hitch and accessories for our 2007 Odyssey in order to pull a pop-up camper. We do not yet own the camper, so I am not certain of the height of the trailer coupler. From what we can tell, it looks as though...

For my needs, I really wanted the Curt C45901 but I also wanted an interchangeable 2 ball setup without needing a giant torque wrench and vice to remove and replace balls. A much better and more economical way to accomplish what I wanted...

Does the included pintle adapter for distribution shank attachment fit on to the Gen-Y hitch? It says it does not fit on other distribution shanks but when I look at the convert a ball distribution shank it seem like it is a standard 2 inch...

I purchasing a fifth wheel with a moryide pin box and I want to use a goose neck adapter with offset like the anderson hitch, will this work? | I also spoke with my contact at Convert-A-Ball about the Cushioned 5th-Wheel-to-Gooseneck Adapter...

Severe chucking.. about to put on my Super Duty 250 cant get over 40 miles an hour even on a smooth Road you feel chucking.. I think I just wasted $$$ | Chucking is felt during acceleration and deceleration so if you are feeling it while just...

Ive got a 2006 dodge 2500 4x4 stock short bed with a gooseneck. I purchased a 1998 38 ft fifthwheel sea breeze that came with a trailboss 15 k hitch. -no rails. Do yall have an adapter that will work with gooseneck? I have owned a fifth wheel...

I recently purchased a curt fifth wheel slider hitch for use on my 2018 F250. It will be used with a 2019 cougar 369bhs. When I spoke to the salesman, I was concerned with bed rail clearance so I went with the taller slider model C16521....

I am looking for an 8 inch drop, extended length ball mount for a 2inch receiver on a Class A motorhome. I need a few extra inches of exposed shank on the ball mount to mount a bicycle rack. Cant seem to find one, other than the Curt 45090...

I have a F250 with a Curt gooseneck with the release on the ball. What do you have that will convert that to a 5th wheel? | The best solution is going to be using a simple gooseneck to 5th wheel adapter for your 5th wheel trailer; I recommend...

2012 Toyota Sienna XLE Im looking to purchase a trailer to tow my snowmobiles. The trailer I am currently looking at has a 24inch Hitch Height to Top of Ball. Hitch mount Part # 75237 has a hitch height of ~11.5. I could purchase an adjustable...

I bought a 2016, Ford, King Ranch, Diesel, 2500, 4x4, 4 dr, it has a short 6.5 ft. bed and already has a BandW Gooseneck installed, Im looking to buy a fifth wheel in a few weeks, do I need to have an off set Convert-A-Ball adapter for this...

I have a factory goose ball set up. I have a maxair? root base king pin that I locked so it cant flex. I bought a gooseneck adapter. I dont have any bed clearance, cant even get to the point Im concerned about the corner of the cab. see photo bought...