Recommended Trailer Hitch Receiver for 2004 Monaco Cayman Diesel Pusher With 7,500 Pound Capacity
I have a 2004 Monaco Cayman Diesel Pusher with a 4000 Lb hitch and the 2005 Monaco Cayman came with a 7500 lb hitch. Where can I find a 7500 lb hitch for my coach? Thanks | In order to add a hitch with that kind of capacity to your 2004 Monaco...
How to Install a 7-Way Trailer Connector on a 1999 Freightliner FL-Series
I’m looking to put a 7 pin plug in my fl112 is this the route that I need to take? Or can I buy a plug with a pig tail and hard wire it in? | In order to add a 7-way trailer connector to your 1999 Freightliner FL-Series you are going to need...
Trailer Hitch and Bike Rack for Motorhome to Carry 70 lb Electric Bike
I need a RV ladder rack for a electric bike , weight is 70 pounds | While there is a way for you to carry a 70 lb electric bike on the back of a motorhome, there are no ladder-mounted bike racks that have the capacity to carry a 70 lb bike....
Bolt Hole Dimensions for Curt Trailer Hitch Receiver # 14080
what are the bolt hole dimensions on this hitch cl to cl | The distance between the bolt holes on the Curt Trailer Hitch Receiver # 14080 is 39-1/4" center-to-center. I have attached a photo to demonstrate this. Please note that this trailer...
Steering Stabilizer For A 1996 Freightliner Chassis With Air Suspension
What steering stabilizer will fit my Endeavor diesel with Freightliner chassis and air suspension? | For your 1996 Freightliner FL-Series with air suspension I recommend Roadmaster Reflex Steering Stabilizer Item # RM-RBK8-RSSA. This is designed...
Air Conditioner Cover That Will Cover Coleman Mach Model
order number 111129730 44001 area code (name) will cover you have in stock work ?? my rv is a 1999 winnabego 36 ft class a | Yes, the MaxxAir shroud part # MA00-325001 is a fit for the Coleman Mach, Mach 1, Mach 3 and Mach 15 models and mounts...
Parts Needed to Install a 7-Way Trailer Connector and Brake Controller on a 2000 Freightliner FL70
I want to install a brake controller and a 7 wire blade trailer connector on my 2000 Freightliner FL70. What pig tail harness and brake controller do you have for this application. I will be towing a three car trailer with a total of 6 brakes....
Troubleshooting Right Side Brake and Turn Signal Not Working With Running Lights On
Hi, have a fifth wheel with a tail light not working properly on one side. With the running lights on, the right tail light, brake, turn signal won’t work. With running lights off, the brake and turn signal work but dimmer than the left...
Parts Needed For Brake Controller on 1995 Freightliner
Where can I find my brake control on my 1995 freighterliner fl70 | A 1995 Freightliner will not have a brake controller port. In order to install one you will need to add a 7-way, and to do this you'll need the following: - Tail Light Converter...
How To Wire a Standard 4 and 7-Way Trailer Connector On a Semi Tractor
Im planning on towing a car trailer. I would like the option of having both 4 pin, and 7 blade connectors. Can you suggest a wiring kit for me? | I do have an option for you but semi tractors use separate stop and turn signal circuits and they...
Buyers Products Hitch Plate Dimensions
I have a freightliner FL70 with the 34” frame looking for a receiver hitch for it with the pintle hitch. I don’t see where any of the ones on your website shows the measurements for the frame. Looking for any help I can get so I can purchase...
Instructions for Timbren Suspension Kit that Fits 1999 Freightliner FL70
Hi I need to see the installacion for freightliner fl70 I want to buy one Kit. | I attached a link to the install instructions page for the Timbren kit part # TRES001 that fits your 1999 Freightliner FL70 for you to check out. |
Installing a P3 Brake Controller on a 1991 Freightliner Truck
Is there a wiring diagram for a 1991 freightliner COE? | There isn't a specific wiring diagram to install the P3 brake controller # 90195 on your 1991 Freightliner but I can tell you the functions of the wires. The white brake controller wire...
Options For Leveling The Back End Of A 1998 Newmar Kountry Star Motorhome
I have a 1998 Newmar Kountry Star motorhome with a GVW of 20,500 lbs. It squats in the rear loaded or unloaded. I want to raise the rear in the expectation that itll shift some of the weight forward and provide better steering. The only thing...
Recommended 2-1/2" Trailer Hitch for a 2006 Thomas School Bus
Have a 2006 Thomas school bus. Best I can tell it’s a freight liner chassis. Frame width is 34 inches outside to outside. I am looking to find a hitch to fit this with 2 1/2 inch receiver. | I do have an option for you but there aren't any custom...
Torklift StableLoad Rear Suspension Enhancement Recommendation for 2012 Toyota Tundra 8.1 ft body
Have airbags and only have to apply 35-40 psi for 1400 hitch wt. I would like the kit to help in the Rockies sharp turns and uneven roads. Your input ! I may upgrade to a 1750 lb hitch load due to a bedroom slider unit 5th wheel and i I would...
How to Install a Hopkins Brake Controller on a 2005 Freightliner Classic Semi Truck
how to install a hopkins brake control on a 2005 freightliner classic semi truck | When using an electric brake controller on a vehicle that vehicle needs to have the appropriate 7-Way trailer connector. Semi-trucks have a different type of...
Troubleshooting Right Turn Signal on 5th Wheel Trailer Malfunctioning
Truck singles all work right and left, when l plug the 5 wheel in ,the left side works, the right side on 5 wheel dose not. Did a continuity check on the plug on all of the leads. All check out,all bulbs are good. Brake lights all work. Running...
Recommended Replacement Brakes, Wiring, and Hardware for a Dexter 5.2K Axle
Im looking for brake assemblies for a 5200 lb Dexter axle. I would like to add cable operated parking brakes also. Could you lead me in the right direction please. Also, is there a kit for the required cables, hardware and lever available? Thank...
Brake Controller Installation with Existing 6-Way Trailer Connector
reading on previously asked questions, you say: Next, you will need the wiring to install the controller and the wiring to add a 6-Way. To add a 6-Way, you will first need to have a 4-Way trailer connector on the truck. If it does not already...
Recommendation of a Trailer Hitch for a 2003 Freightliner FL-70 Semi Truck
I have a Freightliner FL-70 and want to install a ball hitch on it. Do you sell this item? | At this time none of our manufacturers we work with offer custom fit trailer hitches for your 2003 Freightliner FL-70. On the other hand, we offer...
Parts Needed To Add 7-way Connector To A 1999 Freightliner FS65 Bus/Skoolie
I’m wanting to install a 7 pin trailer connector to my bus and I’d like to know what parts I need in order to do this please! | I would be happy to help! First you will need to install a 4-way connector. Since there is not a custom fit option...
Why Is The Frame Service Body Trailer Hitch Cross Tube # 41990 Not Rated For Weight Distribution?
Why cant this be used with weight distribution bars | Since the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 is a universal part and not vehicle specific it is impossible to rate the amount of torsional force the tube...
Filter Your Search
Contact and Help