How Does The UWS Standard Chest Stand Up To The Elements
It states great for shop or garage storage. I need it for outside storage in my cargo rack behind my class B RV. I will be living full time in the elements , Will this stand up to sun, rain etc... | The UWS Chest part # UWS01022 is designed...
Replacement Key For American Aluminum Toolbox Key CH510
I have American aluminum accesories bed toolbox Can you replacement key ?the code# is ch510 | Sure thing, what you're needing for your American Aluminum toolbox is the: -Replacement Key for UWS Toolboxes # KEYCH510. |
Replacement Logo For UWS Toolboxes
My husband has a UWS toolbox in his 2015 Ram 2500 and accidentally knocked the blue logo off of it. He is a bit OCD about it and was wondering if I could replace it for him. | Barb, the replacement UWS Blue Logo Badge for your husband's toolbox...
How to Measure for Replacement Lift Cylinder on Tool Box
Hello had a question for my toolbox, I bought it use to need to replace the shock strut. How I do measure the strut type? Is it when it close or open ? | The Replacement Lift Cylinder # UWSLIFTCYLIND referenced in your question measures 10 inches...
Recommended Chest Toolbox For The etrailer Cargo Carrier For RV Bumpers
Would cargo box UWS01020 fit on this cargo carrier e96ZR? Both are listed as 24inch in width | The UWS 48" Standard Chest Toolbox # UWS01020 is 24" wide x 48" long x 20" tall. Since the inside of the 24x84 etrailer Cargo Carrier for RV Bumper...
Ladder Rack and Deep Toolbox Compatible with 2005 Chevy Silverado Z71 Extended Cab
tool box ladder rack compatibility for 2005 silverado z71 Hi, Im trying to find a ladder rack and deep toolbox that are compatible for my 2005 silverado extended cab. Thanks! | For your 2005 Silverado Extended Cab I recommend using the Thule...
Is The Replacement Non-Locking Paddle Handle for UWS Toolboxes Polished Or Dull Stainless Steel
Is this part polished or dull like the picture | The Replacement Non-Locking Paddle Handle for UWS Toolboxes part # UWSNONLOCKING is polished stainless steel. |
Do the Replacement Locking Latch for DeeZee Tool Boxes Come Keyed Alike?
if I order 9 of these can I get them all keyed alike? | The Replacement Locking Latch for DeeZee Tool Boxes - Hook Style # DZTBLATCH1 do not come keyed alike. They come keyed at random according to my contact at DeeZee so chances of our stock...
Replacement UWS Key Number CH503
hello looking for keys for a lock assembly CH503 | The UWS key part number for the CH503 is # KEYCH503. |
Will DeeZee Red Label Toolbox # DZ43200 Fit 2015 Ford F-350
The website says it does not fit which I thought was a little odd. I had the same box on a 2008 F450 DRW. I do notice the floor of the bed starts to flare up a bit at about half way between the wheel weld and the front of the bed on both sides....
Length of Replacement Tool Box Lift Cylinder
What are the lengths of the cylinder. Both fully open an fully closed? | The Replacement Lift Cylinder for UWS toolboxes, part # UWSLIFTCYLIND measures 7 inches in length when fully retracted, and 11 inches long when fully extended. |
Replacement Locking Core and Key for Toolbox
I bought a tool box at a liquidation place and dont have the keys for top tool box the numbers on the Keyholes are A22 and A03 | I do have a possible option for you but we do not carry replacement parts for Dewalt tool boxes. Instead, I recommend...
Recommended Replacement Lock Cylinder and Keys for Truck Side Box
the back is round with a small half moon knob about 3/16 th of an inch it is a older side box on a truck this slides a bar up to lock a notch in the shaft of the handle i am looking the cylinder and keys | Replacement...
Tonneau Cover that Fits 2020 Ford F-350 Short Bed with Tool Box
2020 F-350, 6.5’ box, Ford 5th wheel puck system, PullRite SuperSlide hitch. Wondering if there is a toolbox and tonneau cover set up that will allow access to the tool box when rolled up without impeding the hitch during towing nor interfering...
Replacement Locks and Keys for Tool Boxes on Used Tow Truck with PK10, PK12, and PK9 Locks
Purchased a used tow truck that has 4 storage cabinets/boxes mounted to it. The previous owner did not have the keys for the boxes. The numbers on the lock set to the boxes are a PK10 2 of those, PK12, and a PK9. I would like to order 4...
Does The Replacement Non-Locking Paddle Handle for UWS Toolboxes Include Rivets?
Does the Replacement Non-Locking Paddle Handle for UWS Toolboxes Part Number: UWSNONLOCKING come with rivets? | The Replacement Non-Locking Paddle Handle for UWS Toolboxes # UWSNONLOCKING only comes with the handle. You will need to source rivets...
Replacement CH509 Key for a Knapheide Service Truck Box
I have a Knapheide service truck box with a key code of CH509. Do the UWS keys fit that also? Thanks | Yes, it is very likely that replacement key # KEYCH509 will also fit your Knapheide service truck box. A lot of toolbox and other box manufacturers...
A frame Trailer Steel Toolboxes Strength and Durability
of your different toolbox manufacturers, which one is the most heavy duty? Does one use heavier gauge material than the others? I am looking for a toolbox for 10 Ton heavy equipment trailer and it needs to be strong and stout. | If you're...
Tool Box That Could Fit at Rear of Truck Bed of 2016 Ford F-350
It would seem this box is made to fit at the end of the bed between the fifth wheel hitch and the tailgate instead of the hitch and cab like it says in the description? Im looking for one that would go at the end of the bed, would this work?...
Large Trailer Storage Box Receommendation
Do have a larger plastic box. Open trailer 5ft wide 12 ft deep only using 9 ft. Need storage | Unless you went with a metal storage box/toolbox like # UWS01020, which is 48 x 20 x 48 and has a 13.3 cubic foot capacity, the Buyer's Products...
Will Smittybilt Winch Fit Inside UWS A-Frame Trailer Toolbox UWS01064
Would this toolbox have plenty of space for a smittybilt xrc 9500 winch, battery box and storage for chains, pull straps, etc? | According to my research the smittybilt 9,500 lb load capacity winch measures 22.3 inches long by 9.4" inches tall....
Replacement Key for CH530 Lock Cylinder
I lost the key ,what can i do change the cilynder? | We do not have a replacement key for the CH530 lock core so your best option is to replace the core altogether with # UWSLOCKCH509 or other key code. The replacement core will include two keys. |
Replacement Keys & Locks for UWS Truck Toolbox
I am looking for a replacement key for my UWS tool box with key number 6000 or 0009 cant tell. Its a new tool box just lost the keys | Key codes for UWS toolboxes usually include the letter prefix CH. Please refer to the photo that shows where...
How Tall Above Bed Rails Does UWS Tool Box UWS07710 Sit
Spec say 2 inches above bed rail but video say 3”. Im looking for lowest profile possible. Thanks much | When we installed the UWS Deep Angled Truck Bed ToolBoox part # UWS07710 we found that the portion that went on top of the bed rails measured...
Filter Your Search
Contact and Help