Ball Mount for 2-1/2-Inch Hitch That Gives 8-Inches of Drop
Good afternoon, I have a 2016 Ram 2500 4×4 Mega cab. Does Convert-A-Ball make an 8 inch for a 2 1/2 × 2 1/2 inch receiver? Thank you | The Convert-A-Ball 2-1/2-Inch Cushioned Ball Mount # AMSCV-6 provides height drop of 6-inches but since...
What Locking Hitch Pin Fits the BulletProof Hitches Adjustable 2-Ball Mount # ED2510?
What locking hitch pin will work with the BulletProof Hitches ED2510? | For a great compatible locking hitch pin for the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitches # ED2510, I recommend the InfiniteRule Hitch Lock for 2-1/2"...
BulletProof Hitches 2-Ball Mount - Do I Just Flip It Over To Use The Rise?
I bought the bullet proof two ball 4 1/4” 4 3/4” rise system. Stupid question, do I flip it over for the rise? Angle and gusset on top | You are exactly right. To use the Bulletproof ball mount # BPH64FR in the rise position you simply flip...
Recover Tow Loop that Fits 2.5 Inches
Do you over a tow hook and tow eye for 2.5 hitches? | We have the Bulletproof Hitches Shackle Hitch for 2-1/2" Receivers # ED25SHACKLE which fits 2.5 inch hitches. This has a 30,000 lb weight capacity. I attached a review video for this for...
Recommended Weight Distribution Shank For a 3" Receiver Without Needing a Reducer
I recently upgraded to an 2019 Ford F350 from a RAM 1500. Have a husky centerline weight distribution hitch and purchased the reducers to get from the 3” ford receiver to the 2” shank. Using a 12” drop Experiencing quite a bit of sway using...
Recommended Adjustable Ball Mount With 16" Of Drop For A 2-1/2" Hitch
Hello, can I get this in a 2 1/2inch diameter for my hitch? I have the reducer to go down to the 2inch but would rather not have to use it if possible! Please let me know asap, as I am going on a trip this week and really need this!!! Thank...
Weight Distribution Shank Adapter for Use with BulletProof Hitches Adjustable Ball Mount
Is the Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount Item # 358WEIGHTDIST compatible with the BulletProof Hitches Adjustable 2-Ball Mount for 3inch Hitch - 6inch /Rise - 22,000 lbs? | Yes the weight distribution shank...
What is the Rise/Drop on BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch MD256
The ad in one place says the is 8inch and in the same ad 6, which is it I need an 8inch for one of my trailers. | The BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # MD256 has an 8-1/4" drop and 8-1/2" rise. BulletProof Hitches does not...
Is the Shank for the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch Sold Separately
Do you offer just the HD256 shank w/o the two ball mount? | The BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch part # HD256 is sold as a complete unit, the shank is not available separately. |
Recommended Ball Mount for Rock Tamers with 2.5" Hitch
Looking at pics I’m pretty sure it will fit. But before I order do you know if the Rock Tamer hitch mud flap will fit the Fastway hitch? | In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part # ERT00110...
Complete Lock Set For Bulletproof Hitches 2-Ball Mount for 2-1/2" Hitch MD254
is there a complete lock set for this bulletproof hitches for 2-1/2 inch hitch? to lock the mount and the platform? | There is indeed a lock set for the entire ball mount as well as the ball mount platform to secure the BulletProof Hitches 2-Ball...
Lock Set For Bulletproof Hitches 2-Ball Mount for 3" Hitch HD304
looking to lock the BulletProof Hitches 2-Ball Mount for 3" Hitch - 5-1/4" Drop, 4-1/4" Rise - 22,000 lbs Item # HD304 but both the hitch and the ball mount platform is there like a 2 in 1 lock set that works? thanks! | Yes, there is a 2-in-1...
Hello, I was curious if some of the ball/pintle combos can be flipped to get some rise for the ball mount. Specifically these 2 Curt products: C48007, CU37FR. Thanks, Steven | According to the folks at Curt, when the # CU37FR and # C48007...
Fit of BulletProof Adjustable Ball Mount on 2018 Ford F350
I assume this hitch would fit my 2018 F350? | As long as your 2018 Ford F350 is equipped with the 2-1/2 inch hitch, and the distance from the inside bottom edge of the receiver tube of the hitch to the ground is between 12-18 inches, the BulletProof...
Will Bulletproof Hitch Adjustable Ball Mount Allow Truck Tailgate to Open without Hitting Jack
do you know if any of the bulletproof hitches will allow you to tailgate without hitting trailer jack on a standard utility trailer with a 2022 f 150 thanks | That's going to depend a lot on the trailer setup as well which we can't know but...
Recommended Ballmount W/ 8" Rise/Drop For Sway Control 2-Ball Platform 358SWAYCONTROLBALL
I need a 2 1/2inch shank with a 8inch with a 20k rating to fit Sway Control 2-Ball Platform for BulletProof Hitches Ball Mount - 2inch and 2-5/16inch Balls Item # 358SWAYCONTROLBALL. Can you help or give me a idea? I have a new Jayco Eagle...
Is There Any Play In BulletProof Hitches 2-Ball Mount # MD256 Which Would Cause Wiggle or Rattle?
Is there any play in the bulletproof hitch? Just bought a used Chevy 2500 where I need a 2.5 inch hitch but I do not want the hitch to have any wiggle or play in it. | The BulletProof Hitches 2-Ball Mount # MD256 is going to allow for play inside...
Adjustable Ball Mount That Has 16" Of Rise/Drop For A 2-1/2 x 2-1/2 Inch Receiver Opening
Require 16inch top of hitch to bottom. Prefer 2 1/2inch but currently 2inch with . | I believe I have what you need. The BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch # HD2516. This ball mount is adjustable for a 16" rise or a...
Is It Ok To Tow Trailers With A lifted Truck?
Can you still tow with a lifted truck? I have a 2018 Ram Cummins with a 4 in Icon lift. Im thinking about getting into hot shotting and concerned about the lift. | Hot Shot driving with a lift can cause issues, but if you were going to be towing...
Question About Product Availability "Hitch 16 Inch Male By Female"
Do you have or can you make a hitch 16 inch male by female | Hello David, are you looking for a Patriot Hitches Adjustable Drop Hitch Receiver Adapter in a 16" drop? If so, I am afraid the 11" drop # PH67SR is the largest they make. If you...
Availability of Adjustable Ball Mount With 13 Inch Drop for Lifted Truck With 2-1/2 Inch Receiver
Hi, I have a 2016 GMC 2599HD with a 6 inch lift my receiver is 2.5” and measures 27inches to top of opening I pull a 7x14 tandem axle enclosed haul mark trailer that measures 14 inches from ground to bottom of coupler when level. I’m looking...
Recommended Locks for the BulletProof Hitches Adjustable 2-Ball Mount for 2 Hitch
I am interested in your BulletProof Hitches Adjustable 2-Ball Mount for 2 Hitch - 6 /Rise - 14,000 lbs Item # MD206...wondering if you sell locking pins to replace the 2 pins and clips...dont want this thing walking away from my truck when I...
Trailer Hitch Ball Mount Systems With At Least a 20,000LB Capacity
Do you offer a 20,000 ball mount for a 2 hitch...thanx | Here is a list of some of our 20,000LB and above hitch systems as we do not just have a ball mount shank rated that high. Shocker Hitch HD Air Cushioned 2-Ball Mount # SHK95VR Shocker...
Can I Use Weight Distribution Shank for BulletProof Hitches with Equal-I-Zer Hitch
Will this adaptor fit the 12k equalizer wd system ,I already have the bullet proof hitch | Yes. The Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount # 358WEIGHTDIST can be used with an Equal-i-zer weight distribution...
Filter Your Search
Contact and Help