Wiring a 4-Way connector on a 2006 Mitsubishi Raider
I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...
Spare Wheel and Tire for 2023 Dutchmen Coleman Rubicon 1400BH
I have a Coleman rubicon 1400bh and was looking to get a spare wheel but do not know the lug pattern or anything. | I was able to find some good pictures of your 2023 Dutchmen Coleman Rubicon 1400BH and it looks like you have ST215/75R14 tires...
Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...
Will Reese Weight Distribution 49912 Work with Tongue Weight of 586 lbs
My campers dry weight is 4383 lbs and hitch weight of 586lbs its 25 ft long my trick is f150 xlt v6 Im looking at the reese 49912 is this product the right fit for my vehicle | Yes, the Reese weight distribution system part 49912 that is our...
Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...
Install Instructions for GloLight LED Trailer Tail Light
Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...
Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider
I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...
Can Weather Tech Bug Shield Survive Going Through Car Wash
Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |
Recommended Transmission Cooler For 2006 Mitsubishi Raider
Installation of external transmission cooler on a 2006 mitsubishi raider with factory tow. What extra fittings might I need for install and what kit would be best | For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission...
Can 2008 Mitsubishi Raider 2WD be Flat Towed with Driveshaft Disconnect
I have a 2008 Raider 2WD with a drive shaft disconnect. I currently tow it on a dolly. I would prefer to tow it 4 down but cant find base plates. Any suggestions? Thanks | If you have a rear driveshaft disconnect on your 2008 Mitsubishi...
Is a Dutchmen Coleman Rubicon Setup for Crossbars from the Factory
My wife an I are possibly getting a Coleman Rubicon 1200RK and i understand it is preset up for crossbars. Do you happen to have any idea which rack I could use? Which siderails and crossbars, or is there a crossbar only set up that I can do,...
Spare Tire Option For 2023 Coleman Rubicon 1200RK
Hi id like to know the tire size and a good spare to buy for my coleman rubicon 1200rk | Hi Christopher; from what I could find online, the 2023 Coleman Rubicon 1200RK uses a 215/75-14 tire, and for a spare that would work you can use the Provider...
Electric Brakes On Trailer Working Intermediately With 2006 Mitsubishi Raider
I have an issue with my trailer brakes working only when they want to. Ive tested the controller as stated, checked red and black for power, severed the blue wire, its working properly. As I drive trailer brakes will start to work sometimes...
Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails
I need a tool box for the bed if my truck but I want it to fit comfortably inside I dont want it showing | I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that...
Trailer Wiring Harness Recommendation for a 2007 Mitsubishi Raider
I need to add a 7 wire harness to my 2007 Mitsubishi Raider pick up so I can pull a small camper. The truck does not have a factory wireing harness for towing. Which harness would be the best for me to use. | For a 4-way wiring harness recommendation...
Replacement Drive Head Cover for Lippert Edge Awning
See attached photo. Looks like there is no way the right-side cover will fit. I have a Lippert Edge Power awning | Since you need the cover for the drive head of a Lippert Edge awning the correct replacement is the part # LC32NJ. |
Filter Your Search
Contact and Help