Can Weather Tech Bug Shield Survive Going Through Car Wash
Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |
Can 2008 Mitsubishi Raider 2WD be Flat Towed with Driveshaft Disconnect
I have a 2008 Raider 2WD with a drive shaft disconnect. I currently tow it on a dolly. I would prefer to tow it 4 down but cant find base plates. Any suggestions? Thanks | If you have a rear driveshaft disconnect on your 2008 Mitsubishi...
Recommended Transmission Cooler For 2006 Mitsubishi Raider
Installation of external transmission cooler on a 2006 mitsubishi raider with factory tow. What extra fittings might I need for install and what kit would be best | For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission...
Recommended Suspension Enhancement System for 2010 Hummer H3T with Aftermarket Lift
hi looking for a airlift spring spacer to fit AL59563 AIR LIFT 59563 Ride Control Rear Air Spring Kit h3t with a 2 lift in the back. would this be the correct one Air Lift Spring Spacers for LoadLifter Air Helper Springs - 2 Item # AL52420...
Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider
I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...
Install Instructions for GloLight LED Trailer Tail Light
Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...
Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails
I need a tool box for the bed if my truck but I want it to fit comfortably inside I dont want it showing | I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that...
Will Timbren Front Suspension Enhancement System # TGMFC4 Fit 2009 Hummer H3T
Just need to confirm if it fits a HUMMER H3T 2009 | I checked with Timbren and was able to confirm that the Front Suspension Enhancement System # TGMFC4 referenced in your question is a fit for your 2009 Hummer H3T. These jounce-style springs...
Wiring a 4-Way connector on a 2006 Mitsubishi Raider
I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...
Installing a Tekonsha P2 Trailer Brake Controller on a 2010 Hummer H3T with Factory 7-Way Connector
Ive bought a prodigy 90885 and want to install on my hummer is there any harness that I can hook Into or do I have to splice in all the wire. I have a 7way plug from the factory. The brake pedal wire is the one im really concerned about. Any...
Wiring Harness Recommendation For 2009 Hummer H3T Without Towing Package
Hello i need to know what wiring package to purchase for my 2009 hummer h3t with a factory towing package. Please help me asap i need to purchase asap thanks. | If you do not have a connector at the rear of your 2009 Hummer H3T, I recommend...
How is the P2 Brake Controller Installed in Hummer H3T
Where are the wires to hook up the controller, it has a tow pkg with a 7 pin on the rear | You can install the Tekonsha P2 Brake Controller, # 90885, which you referenced, on your Hummer H3T yourself. There is no plug under the dash of the H3T...
Brake Controller Installation on 2009 Hummer H3T
Just recently bought an H3T. vehicle came equiped with a tow package. Is this something I can install myself. Will there be a wiring harness under my dash that this will connect to? | Yes, you can definitely install the Tekonsha P2 Brake Controller...
Trailer Wiring Harness Recommendation for a 2007 Mitsubishi Raider
I need to add a 7 wire harness to my 2007 Mitsubishi Raider pick up so I can pull a small camper. The truck does not have a factory wireing harness for towing. Which harness would be the best for me to use. | For a 4-way wiring harness recommendation...
Electric Brakes On Trailer Working Intermediately With 2006 Mitsubishi Raider
I have an issue with my trailer brakes working only when they want to. Ive tested the controller as stated, checked red and black for power, severed the blue wire, its working properly. As I drive trailer brakes will start to work sometimes...
Will the RockyMounts DriveShaft Track Truck Bed Bike Rack Work On a 2010 Hummer H3T
will this work with my H3T rail system?? Thanks | The RockyMounts DriveShaft Track Truck Bed Bike Rack part # RKY1086 is compatible with GM truck bed tracks so it should work on a 2010 Hummer H3T as well since it's made by GM but I don't have...
Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...
Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...
Filter Your Search
Contact and Help