Correct Bearings for Starcraft Lexion 5th Wheel Trailer with 7K Axles
RV Wheel Bearing Question: I have a 2011 Starcraft Lexion 5th wheel. The Axle reads DEX#2026443. What Wheel Bearing Kit do I need? I look forward to your reply. | The bearing kit you'll need for a Starcraft Lexion 5th Wheel with 7K axles is...
Recommended Trailer Hitch And Trailer Wiring For 2008 Land Rover LR2
can i use euro ball mount with Curt 13052-59146 Trailer Hitch | The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover. This is a Class lll hitch and it has a 2 inch receiver opening. The Euro...
Trailer Hitch and Wiring Recommendation for 2012 Land Rover LR2
I want to install a trailer hitch on my 2012 LR2 Land Rover. My questions are as follows: What hitch will work best as a bolt on where I dont have to cut the rear bumper? What electricial unit do you recommend for this vehicle. Keep in mind...
Adding a 7-Way Trailer Connector and Brake Controller to a 2008 Land Rover LR2
Im curious about what mods to make to my 08 Land Rover LR2 to get an electric brake hookup to work. Our LR2 came with a 4 prong wiring harness and we have been told that to hook up a 7 prong requires splicing and that the splicing will set...
Parts Needed to Install 7-Way Trailer Connector on 2008 Land Rover LR2
Hi, I would like to know what wire to buy to install on my Land Rover LR2 2008. Your finder tool tells me to get a 4-way flat connector, but the trailer I want to connect is a 7-way connector. Do you sell 7-way connectors for the LR2? | To install...
Does the Upgraded ModuLite Kit # C59496 Come With a Dust Cover
For product: Upgraded Modulite Vehic le Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit Item # C59496 Does this product include a cap/cover for the 4 prong trailer wire plug? In the pictures there doesn't seem to be a cap...
Will the C59496 Trailer Taillight Wiring Harness Work on a 2008 Land Rover LR2
I have had alot of difficulty finding compatible parts for my 2008 Land Rover LR2. When searching your site it says that this product is ready to go for my vehicle. This may sound skeptical, but are you 100 certain that it is desgined for and...
Is 67 Bulb Correct License Plate Light Replacement?
Bulb replacement for license plate light for 1993 Mitsubishi pickup mighty max. What is the wattage? Im looking for a 12v 6 watts. Is this compatible? | Though the wattage for Replacement Bulb # 67 was not available, this 12V bulb will replace...
Recommended Trailer Hitch And 4-Bike Carrier For 2011 Land Rover LR2
Will Draw-Tite Max-Frame Trailer Hitch Receiver, # 75688, Fit my 2011 Land Rover LR2 HSE? And could you please recommend a bike rack which can carry 4 bikes from you ? | The Draw-Tite trailer hitch, part # 75688 will work great on your LR2....
Does Canine Covers # DCL6343CH Fit a 2011 Land Rover LR2
What are the measurements of the Canine Cover? I want to protect the entire cargo area, including the back of the front seats, with the rear seats folded down. I also would like to know how much padding there is, and what type of material is...
Will the Thule Hitch Post Trailer Hitch Mount Bike Rack Fit a 2011 Land Rover LR2 with Curt Hitch
I have a 2011 LR2 and a Thule Hitching Post bike carrier for 2inch hitch left over from my last vehicle. Im looking to purchase the Curt 13052 trailer hitch and am wondering if this setup will be compatible with the proper clearance? Thanks...
Westin Fey Diamonstep Bumper that Fits 1987 Mazda Mighty Max
Hi. I want to know if this bumper is compatible with a Mitsubishi Mighty Max 1987 4x4 2.6lt pickup model. Thanks. | Yes, with the correct install kit the Westin Fey Diamonstep bumper part # 61000 is compatible with your 1987 Mitsubishi Max....
Will Curt 4-Way Trailer Connector Work With 2009 Land Rover LR2?
I have read that this vehicle cannot be wired for towing because it has a CAN network protocol to transmit signals. Does this kit work on my 2009 Land Rover LR2. Do I need it programmed by a Dealer? Thank you for any assistance. | The Curt Powered...
LED Light Strip Flickering When Plugged Into 4-Way Connector on 2008 Land Rover LR2
I have a 2008 landrover lr2. Im trying to install a light strip along the bumper that plugs into my 4 pin trailer connector, but it just flashes. I know there are 7-4 way adapters that correct this, but my vehicle only has a 4 pin connector....
Availability of 13-Pin to 4-Pin Adapter for a 2008 Land Rover Configured for European Standards
Hello, I have a 2008 Land Rover LR2 with a standard European 13-pin trailer light hook-up. Now back in the states, Id like to get a 13 to 4-pin adapter without having to do a complete rewire. Is there such an adapter out there? Thanks!...
Will Installing Trailer Wiring Disable the Backup Sensors and Alarm on a 2008 Land Rover LR 2
I have a 2008 Land Rover LR2. It has back up sensors in the bumper and an alarm sounds if vehicle is in danger of backing into something. These back up alarms apparently sound continuously if a trailer is towed. The OEM wiring harness stops...
Will the Thule OutWay 3 Trunk Mount Bike Rack Fit a 2008 Land Rover LR2
Will this bike rack fit a Land Rover LR2 2008? | I checked with Thule and the OutWay 3 bike rack, # TH56BV, will fit your 2008 Land Rover LR2. If you will be carrying women's, children's, or alternative frame bike racks, I recommend using...
Will the Trailer Wiring Harness Affect a 2008 Land Rover LR2 Back-up System
I just purchased this kit for use on a 2008 Land Rover LR2 HSE. The cars have rear back-up sensors in bumper. Will this componant disable that system, or is something further required? | No, the # C59496 trailer wiring harness for the 2008 LR2...
Difference Between Rhino-Rack # RR67GR and Leg Kit # RRRLKVA for 2008 Land Rover LR2
Whats the difference between this model for $ and the one shown higher up on page #JA2134 that just has 2500 series and lists for $? Im equipping a Land Rover 2008 LR-2 with smooth roof has sunroof but no factory mounted rails at all. Intending...
Parts Needed to Install a Brake Controller in a 2015 Land Rover LR2 with 4-Way
Hello, Do you have instruction on installing brake controller and 7 pin connector on recent year Land Rover LR2? I have a 2015 model with factory 4 pin connector. However my camper requires brake controller. Thank you | From there you would...
Does the Draw-Tite Hitch 75688 for a 2008 Land Rover LR2 Require Trimming of the Rear Fascia
land rover states that the bumper needs to be cut to fit towbar is this true? | I could see needing to trim the rear fascia for the Land Rover OEM hitch, but the Draw-Tite hitch does not require fascia trimming. It is designed to fit just below...
Needing Mount Kit to Install Westin # 71000 Bumper on 1991 Mitsubishi Mighty Max Truck
May I purchase only the two mounting bracket and washers and bolts without the bumper as I currently have a good bumper but rusted L shaped brackets. If possible, what is the cost and what would the shipping via us postal service be to Hawaii? Thank...
Is the European Style to 4 way Flat 118710 Considered a 12N connector
Hello, Im looking at your item number 118710. Is the 7 pin European connection it uses the same as a 12N 7 pin connection? | Yes. The Trailer Connector Adapter for Land Rover - 7-Way, Round Pin, European Style to 4-Way Flat # 118710 is considered...
Recommended Electric Fireplace with Blower Fan
looking for one that has a fan on it for the wife. do you carry one with a fan? | The 26" Greystone Electric Fireplace with Remote Control # 324-000065 does force the air out utilizing a blower fan. It works like a space heater with the different...
Filter Your Search
Contact and Help