Parts Needed to Rebuild Lippert Landing Gear Legs for Keystone Montana
Do you sell a repair kit for the lc 178652 and lc 178653 threaded rod nut bearings and beveled gears? | Yes. You can rebuild the # LC178652 (follow leg) and # LC178653 (lead leg) with part # LC146059 for the lead leg and part # LC146060 for...
Which Lift Kit for Lippert Diamond Torsion Axle on 2017 Jayco Hummingbird 17RK
Hi, Could axle raiser kit # LC270682 fit 2017 Jayco Hummingbird 17RK? | Yes. Based off the serial number provided (thank you for the pictures) you've got a Lippert Diamond tube torsion axle, so you will want to use the Axle Riser Kit # LC270682...
How To Find Replacement Pin Box for Keystone 5th Wheel Trailer
I need to replace my pin box on my 2007 keystone 5th wheel trailer. The number on the brackets that the pin box attaches to is LCI 190741732, there are no numbers on the pin box itself anymore. Can you tell me what pin boxes would be compatible...
Will Replacement Light Module for Lippert Electric Trailer Jack Work With Darker Lens
I want to upgrade my light on the front of my Lippert electric tongue jack to LED. The problem is the light cover is damaged from the sun. If I buy your Replacement LED Light Module for Lippert Electric Trailer Jack Item # LC226027 Im afraid...
Replacement RV Slide Out Motor to Replacement for Power Gear 130-1305
Does this part number replace the power gear 130-1305 slide out motor? | To replace your defective Power Gear 130-1305 RV Slide-Out motor, you'd use the LCI # LC368446 as confirmed by Lippert. The LCI # LC386322 motor you referenced replaces...
How To Reset the Control Panel on a Lippert Ground Control System
I went to unhook my fifth wheel, and on the ground control display, it is blank. jacks all work but the display is totally blank. I unplugged everything reset the power, and the same result, display is blank. Is there a fuse for the display?...
Recommended Latch Lock to Replace Original Cam Style Locks
Hi, I have the old style latches in the compartment in the front of my 5th wheel underneath my pin box area. It has 2 twist non-locking latches on each side of the door and a locking latch in the middle. I would like to replace them with slam...
Parts Needed for Window Awning on RV
Do you have complete window awning kits? | There are not complete kits, but all that is needed for a complete window awning is the projection window awning roller and the awning support arms. For example, the Solera 18" Projection Window Awning...
Slide Out Awnings for Outside to Outside Flange Measurements of 72-1/2, 83-3/4 & 101-1/2 Inches
Im get different sizes from different people at your establishment. I want to order awnings for my camper but very concerned on what size to order because of the mixed opinions from your staff. My slide out sizes measured from outside flange...
Picking Out Replacement Struts for Solera Awning Gas Struts
How can i replace gastrut in solera awning | If you are unsure which Solera awning strut replacement you need you can measure what you have to determine which you could need. The # LC260282 measures 24.38" when extended and 14.70" when retracted...
Can Trailer Door Be Closed When Lippert SolidStep Assembly Is Folded Down For Use
With these steps can these be in the down position not stowed and allow for the RV door to close so the trailer is not open to the exterior elements? | Yes, the Lippert SolidStep Fold-Down Steps like the Triple # LC791573 that you referenced...
Picking Out Lippert Ground Control 3.0 6 pt or 4 pt for 2015 Grand Design Reflection 337RLS
Hey, I have a 2015 Grand Design 337RLS fifth wheel with front landing jacks and rear stabilizer supports no mid way jacks. Is this model compatible for the Lippert 3.0 6 point leveling system. I am concerned the stairs may get in the way of...
Replacement Jack for Atwood Robofoot Jack without Folding Foot
Hey Guys, Ive got the following jack: AT81068 and Im looking for a stationary jack foot rather than the flip down. The problem with the flip down on my trailer is that for the trailer to be level, the foot is too close to the ground to actually...
Can A Slide Topper Awning Be Installed On a Slide Out with Standard Awning Already Attached
I am about to purchase a 2020 Grand Design Reflection 303RLS which has a Solera side awning on the door-side slide. How can I determine if there will be clearance for the topper hardware? Is this even conceivable? Photo attached. | In order...
Replacement for Atwood Landing Gear on 2004 Fleetwood Wilderness 5th Wheel Trailer
I have a 2004 Wilderness 5th wheel and the Atwood Jack electric motor quit working and I am trying to find a replacement. My old jack motor was an Atwood motor 70079. Will this motor work as a replacement. | I reached out to my contact at...
Troubleshooting RV Slide Out that Makes Grinding Noise In and Out
Grinding sound when slide is going out and in thks | When RV slide outs start grinding the issue is sometimes something dragging on something else in the track. It can be that the tracks had something fall into them and now that is what you...
Picking Out Slide Topper for 2018 Grand Design 2800BH
What size would I need for my RV? | When picking out a slide topper for a travel trailer the key is to measure the width of the box including the flange that runs around the outside of it. Since we don't have a way to determine that dimension...
Power Gear Slide Out Motor Recommendation for Part Number 521066
we have a 2003 southwind 35r made by fleetwood. it seems my slide motor is weak. its a power gear part #521066. I dont seem to be able to find anything to match can you cross reference this older part number? | We've checked with the manufacturer...
Which Solera Awning For Box Width of 150-1/2 inches
We have a slide that is 150 1/2” long from end to end of the outer wall, what length slide-awning should we purchase, the 12’ 7” model? It would need to be black to match the main awning. | Yes you would want the 12 foot 7 inch version # LCV000168109...
Will the Stromberg Carlson Bike Bunk Work with a Weight Distribution System
will this rack mount around an equilizer wd hitch, and if so does this carrier include the bicycle rack itself, or is it just a receiver for a bike rack. | Yes, you can use the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack part # CC-275...
Is the Lippert Components 2 x 3 and 3x3 Standard Slide-Out Gearpack Heavy Duty
Is there a heavy duty gear pack for the 2 x 3 lippert slide out assembly? I see the standard slide out gear pack 1404509 looking for a heavy duty gear pack if available. Thanks | We have the standard gear pack for the 2 x 3 Lippert slide outs...
Which Lippert SolidStep Fits 2015 27 foot Coachman Catalina Banner Edition with 25.5 inch Door
We have a 2015 27foot Coachman Catalina Banner Edition travel trailer. Our doors measure 25.5. Is there a model of fold down steps available for our trailer? And how do the install? | Since your doorway measures 25-1/2 inches in width you'd...
Installing Lippert Never Fail Tandem Axle Suspension Upgrade Hardware Kit
what is the shackle bolt torque there was no instructions with mine | According to Lippert there aren't any specific torque specs for the Never Fail Tandem Axle Suspension Kit # LC281285. You will just need to tighten down the bolts until the...
Can Lippert Jack It Bike Rack be Adapted to Fit 2 inch Trailer Hitch
Is there an adapter that would allow me to mount the Jack-It double bike carrier to the 2-inch receiver hitch on my vehicle? | Yes there is! The Bump It adapter part # LC723359 is designed to fit the Jack-It 2 Bike Rack # LC429756 and allow...
Filter Your Search
Contact and Help