Available Lengths Of Taylor Made Dock Bumper
Does this product come in other lengths besides 50 feet? | Aside from the 50 foot version - Taylor Made Dock Bumper - Foam - 50' Long x 5-1/2" Tall x 2" Thick # TM84ZR, there is also the 25 foot version - Taylor Made Dock Bumper - Foam - 25'...
What is Inner Diameter of Mooring Collar # 36933020
What is the ID of the collar? | The inner diameter of the Mooring Collar part # 36933020 is 1-3/4 inches. |
Recommended Cover for Maurell Crest 22’ Pontoon Boat
I need an easy cover to put on and takeoff as it will be put on during the week and probably take it off every third or so weekend which one would you suggest | The Taylor Made Eclipse Pontoon Boat Cover part # 36970912 is what I recommend for...
Will Taylor Made Eclipse Center Console Boat Cover # 36970911 Fit 1997 Proline Boat w Center Console
1997 proline 18ft with center console will this cover work | Yes, the Taylor Made Eclipse Center Console Boat Cover # 36970911 would fit your 1997 Proline that is 18 feet long and has a center console. |
What Is Needed To Install the Taylor Made ClearVue Keel Protector
What’s needed for installation | In order to install the Taylor Made ClearVue Keel Protector part # 36945950 you aren't required to have any additional tools but I have attached some below that will make things easier for you. - Blow Dryer...
Availability of 24" Diameter Mooring Buoy With Metal Collar
Do you have a 24-in diameter Buoy with a metal collar? | We have just what you are looking for. You will need the Taylor Made Sur-Moor T3C Mooring Buoy with Center Tube - 24" Diameter # 36946374 with metal collar # 36933025. I included videos...
Dimensions of Dock Bumper part # 36945652
depth of dock bumper? | The height or depth of the Dock Bumper part # 36945652 that you referenced is 15 inches and the diameter is 6-1/2 inches. |
Recommended Cover For The Taylor Made Big B Inflatable Fender 36971034
I have TWO Taylor fenders like this: Taylor Made Big B Inflatable Center Tube Boat Fender for 50 to 60 Long Boats - Black Vinyl Item # 36971034 I am looking to replace my Fleece Covers do you sell the covers for these fenders and if so can...
Recommended Windshield Snap For A Boat Windshield With 3/4" Trim
Hello What size snap clip do I need on my boat windshield per the attached photo? | The windshield snap is going to go over the lower trim piece and clip into the gasket on the glass so based on the picture you've provided you'll need the Taylor...
Will Taylor Made Foam Dock Bumper 36946011 Stabilize Floating Dock
Considering Taylor Made foam dock bumper, 36x5x3.25. Will this increase stability of floating dock if I install it at the waterline? Thank you! | A foam dock bumper such as the Taylor Made Foam Dock Bumper - Edge Mount - 36" Long x 5" Tall...
Where on Boat Should Bimini Top Tracks Install
Can the slide tracks work mounted on inside of boat because I want the bimini to fit inside of boat and not on gunnel. My question is this system strong enough to hold bimini when opened up on water. or what other system can i use?? | Bimini...
Availability Of A Replacement Neoprene Cover For The Rotomolded AM24NR Boat Fenders
I asked, can you buy the neoprene covers only?inch Without the fenders! And everyone said Yes you can buy the fenders separately. So several answered that Yes I can buy the fenders separately! | I am sorry for the confusion. We do offer a neoprene...
Compressed Length of 15" Taylor Made Marine Gas Strut for Boat Hatches
What is the compressed length of your Taylor Made p/n 3691826 hatch strut? | The compressed length of the 15" Taylor Made Marine Gas Strut for Boat Hatches # 3691826 is 9". |
Where to Measure to Pick Out Replacement Gas Strut Like 3691823
were do you measure from | You'd need to look at the two strut mounts you have and then measure the distance between them when the latch or hatch is in the open position and that's correct length you'd need. The part # 3691823 is 10 inches in...
Availability Of Taylor Made Fender That Is 22" Tall x 6-1/2" Diameter And Is Beige W/ Black Ends
I have three Taylor Made boat fenders that I bought with my boat in 2007. One is punctured and I would like to replace it with the same size and color. It measures the same as your Taylor Made Boat Bumpers - 369952622 however the ends are...
Does the Taylor Made Tuff End Round Boat Fender Ship Deflated & What is Needed to Inflate the Fender
Does this ship deflated and if so what is needed to inflate it? | Yes, the Taylor Made Tuff End Round Boat Fender for Commercial Boats # 36961152 ships deflated. To inflate the boat fender you will just need a hand compressor or hand pump. The...
Where Is Taylor Made Flags Produced At
Where are your flags made? | The Taylor Made South Carolina Boat Flag - 12 inch Tall x 18 inch Long - Nylon # 36993126 is American made. |
What Inner Diameter Pole Does Taylor Made Internal Eye Ends for 3/4 Bimini Top Poles # 36911702 Fit
these state they are for 3/4inch pole. Is that the pole ID or OD? I need parts that fit an approx 3/4 inch pole ID. Thanks | The Taylor Made Internal Eye Ends for 3/4" Bimini Top Poles # 36911702 that you referenced is designed to fit a pole...
Will The Taylor Made Dock Pro Heavy Duty Bumper Mount To A 4x4 Post
I see that these measure 5 inches wide . Is it possible to use this on a 4x4 post . I dont mind if it goes past post , just want to make sure I am able to fasten to 4x4 | The Taylor Made Dock Pro Heavy Duty Dock Bumper - Edge Mount - 35-1/2"...
What is Compressed Length of Taylor Made Gas Shock 3691843-20
What is the compressed length of this gas shock? The gas shock on the entry door of my 2016 Jayco X20E ultra-light has broken and Im looking to replace it. Thanks | When the Taylor Made Gas Shock part # 3691843-20 is compressed it is right...
What is the Weight of the Taylor Made T-Top Electronic Box # 36983558?
How much does the Electronic Box # 36983558 weigh? | The Taylor Made T-Top Electronic Box # 36983558 weighs a total of 32 pounds. |
Mounting Socket for a 7/8" Boat Rail with a Compatible Flag Pole and Flag
Need to match up the correct 1/2inch stainless steel did that will fit into the bracket part # 369961? And the flag size that would go with the flag pole Thank you | The Taylor Made Mounting Socket for 1/2" Diameter Flag Pole # 369961 does...
Dimensions of 23 40 Lb Taylor Made Marine Gas Strut for Boat Hatches
On the one I am replacing, the shiny rod is 10inch long. Is this one about the same or whatever it is, will it work for my motorhome entry door? | The Taylor Made Marine Gas Strut for Boat Hatches part # 3691879-40 measures 23" long extended...
Are There Corners for the 50 Foot Taylor Made Double Decker Dock Bumper
DDB3.CU50 Would like to see the profile of this product. Do you have matching corners? Field cutting | I have added some photos showing you the profile look of the Taylor Made Double Decker Dock Bumper - Foam - 50' Long x 8" Tall x 2" Thick...
Filter Your Search
Contact and Help