Parts Needed to Install Surge Disc Brakes on 3,500 lb Axle Trailer without Brakes
Can this kit be used for a complete new install on a trailer with 14inch wheels? No hydraulics, and what actuator/control do you recommend? | The Kodiak Disc Brake Kit # K2R35S can fit on a trailer with 14 inch wheels as long as the axle is...
Grease Cap for a Kodiak Hub-and-Rotor Assembly
What cap will fit with this hub/rotor assembly? - Item # KHR10D Should I get the EX Lube Drive in with Plug or Bearing Buddy? | For the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs item # KHR10D you will want the 2"...
Parts Needed To Convert 1998 Nitro Boat Trailer from Hydraulic Drum Brakes To Hydraulic Disc Brakes
I am looking for options on updating/upgrading the brakes on my 98 Nitro boat trailer. I am not sure what disc conversion kits would work. I know the axle is 3500# UFP Axle EZ Loader 44649 /68149 Boat 2.33 Seal as I have put new bearings in...
Difference Between Fixed Brake Calipers and Free Floating Brake Calipers For Trailer Disc Brakes
ever hear of floating calipers 2000 nitro | The Kodiak Disc Brake Caliper # KDBC225KG is a free floating caliper. It has to float as there is only a piston on one side of the caliper and as it pushes the caliper slides and applies clamping force...
Disc Brake Conversion for Forest River Vengeance 27BH14
Id like to talk to someone to understand my options for upgrading to a disc brake electric over hydraulic system on my 2015 TT Toy Hauler 27BH14. Thanks, | In order to find the correct disc brake kit for a Forest River Vengeance 27BH14 you'll...
What Type of Oil Should Be Used for Oil Bath Hubs On a Trailer Axle
What kind of oil do you put in a Dexter axle | We recommend using the Kodiak Synthetic Bearing Oil for Oil Bath Hubs part # XLPROLUBE for oil lubricated axles. This oil is specially formulated to work on trailer bearings with oil bath hubs on...
Cross Reference for Kodiak Ceramic Brake Pads # K2250CP
The cross reference chart for kodiak brake pads doesn’t show a cross reference for the K2250CP pads. Is there an updated chart? | The Kodiak Ceramic Brake Pads # K2250CP are not shown on the cross reference chart you mentioned, but if you have...
Recommended Axle-Less Trailer Suspension with Hydraulic Brakes for 1200 lb Setup
Axle-Less Trailer Suspension with Hydraulic Brakes for 1200 lb Setup | For a 1200 lb setup I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Wide Tires - 1,200 lbs # ASR1200S03 to start. This will work well...
Bolts and Lock Nuts to Use for Mounting Kodiak Disc Brake Kit # K2HR79E
bolts to mount 5200lb Kodiak brake backing plate | For mounting bolts to mount the brackets of the # K2HR79E to the flange we have the part # 7-5 for the bolts and then # 38LW for the lock nut. |
Fit of Kodiak XLPROLUBE1980KIT on 3500 lb Spindles With 171255 Grease Seal
I think this is what I need just want to make sure and not order wrong. My old seal number is TMC 171255TC bearings are L68149 inner L44649 outer old grease cap just a tick under 2inch with tape measure. By the way I read the info the 1980 kit...
Replacement Backing Plates and Brake Lines for an EZ Loader Boat Trailer
Good Morning, Im looking to replace my brake assembly from the actuator back and replace bearings as well. Could you please assist in making sure I get the right parts? My trailer: EZ Loader EZB 19-22/24 3700 15/6 Rims Reliable oil Bath Bearings. Thank...
Items Needed to Convert Trailer to EOH Disc Brake Operation
trailer: Grand Design 320X...lippert 6000 axles...what disc brakes complete? actuator/lines/discs and calipers with brackets thanks | The 6K-rated disc brakes we have are shown on the linked page. All use the 6-on-5-1/2 bolt pattern and we...
Disc Brake Conversion Kit and Electric Over Hydraulic Actuator Recommendation
I have a Gobi overland trailer with 5 on 4 1/2 drums, I would like to refit with disc brakes and hydraulic over electric actuator. I also have the Redarc pro trailer brake in my vehicle. what all do I need/recommend? Thanks, | For your Gobi...
Does Pilot Hole Size Matter With Lug-Centric Hub?
We have a trailer that the pilot hole is a good 1/4 inch bigger than hub and is lug nut centered like I read in one of your answers but we keep braking studs and are told because the pilot hole Bose nit match and the studs cant carry the load...
Warranty Information for Kodiak Rotor/Hubs that Need to Be Replaced
I bought the Kodiak rotor/hub for my trailer and the center bore on one of them is all chewed up. Was there any warranty on these? | I went ahead and confirmed with Kodiak that if you have a e-coat/dacromet model of rotors like the # KHR10D,...
How To Find Correct Replacement Hubs for Skeeter SX2250 Trailer
I have a 2016 Skeeter SX2250 with a Skeeter/EZ Loader trailer that needs new brakes. It currently has a surge brake setup and Vault integrated hub/rotors on the tandem torsion axles. Im looking to install a Kodiak slip on disc brake system...
Would Kodiak 8k Brake Set # K2HR858AE Fit on 8k Trailer Axle with Brake Flanges
Could I order an 8k axle without brake hubs and install these | Yes, if you ordered an 8k axle you could install the Kodiak disc brake kit part # K2HR858AE on it as it would bolt right up to the brake flanges present. These are also oil bath...
How To Transition A 2021 Grand Design Reflection 278BH To Electric Over Hydraulic Disc Brakes
Hi I have a 2021 Grand Design 278BH 5th wheel 34. I am looking at what parts I would need to upgrade the brakes from electronic drum to disk. I know the axles are dual Dexter 5,100lbs units. Are you able to point me in the direction of which...
Replacement Rotors and Brake Pads For EZ Loader Boat Trailer With Kodiak 3,500LB Disc Brakes
Would this work with my EZ Loader Boat railer/ Model Tez 102B 19-22/ 4700// 14 inch wheels tandem axle trailer. Tapperd axle 1 3/8 inner 1 1/16 outer. 10inch disk and Kodiak 225 caliper// Thanks | Since you have a Kodiak Disc brake caliper...
How To Convert Trailer with 12K Axles from Drum to Electric Over Hydraulic Disc Brakes
I have a Diamond C trailer with 12k electric drum brakes. I want to convert it to EOH disc brakes. Do you have a kit to convert it to Electric over hydraulic disc brakes. Do you have a kit to do this? | Yes, we do offer disc brakes for trailers...
Do Trailer Hubs # AKHD-545-35-EZ-K and # AKHD-550-35-K Fit Same Spindle
I want to replace surge brake system with Electric. The bearing numbers are L44649 and L68148, the current pattern is 5 on 4 1/2, I want go 5 on 5. Looking for the part numbers for backing plate and hub drum assembly. Is AKHD-545-35-EZ-K and...
What Kodiak Brake Kit Will Work On My Ranger Boat Trailer, Do I Need Extra Parts For The Install
Which Kodiak Disc Brake Kit will work on my trailer? Straight spindle 1 3/8 see pic, 5 lug 3500 lb axle. I currently have UFP DB42 2003 Ranger boat trailer. Thanks | The Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs,...
Solution for Trailer Brake Caliper that is Too Close to Leaf Spring
Hello, I purchased a Stainless Kodiak Disc Brake Kit and I have run into a little problem. The leaf springs are in the way for the brake line to come off the caliper. See attached image. Is there an elbow connector that I can attach to the...
Are Brake Pads Included with the Kodiak Disc Trailer Brake Kit, # K2R35D
Are the pads included in this kit? | Yes. The Kodiak Disc Brake Kit, # K2R35D, comes with High-performance, ceramic brake pads. I have included a link to the installation details for you to view. |
Filter Your Search
Contact and Help