Bike Rack For Carrying E-Bikes Behind a 2020 Prime Time Crusader 5TH Wheel With 4" Square Bumper
I have a 2020 Prime Crusader 330MBH 5th Wheel with a 4 inch square bumper see photos and the wife wants ebikes. Will this rack work with a bolt on receiver with my bumper configuration? If so, do you sell a 2x2 bolt on receiver? I understand...
Replacement Installation Hardware for Curt Trailer Hitch and 2007 Chrysler Aspen
Hardware for 2007 Chrysler aspen Lost my package in move | For replacement hardware to install Curt trailer hitch # 13702 on your 2007 Chrysler Aspen you will need # RHK. Enter the hitch number and manufacturer where indicated on the RHK page....
Wiring Differences Between a 2008 and 2007 Chrysler Aspen for T-One Harness Part # 118390
Video on website utilizes a 2008 Chrysler Aspen in demonstration. My question is are there any differences in install on 2007 Aspen? | There should not be any difference in the wiring process between a 2007 and 2008 Chrysler Aspen. They use...
Why is a Battery Connection Required for Trailer Wiring Harnesses on a 2009 Chrysler Aspen
what is the need for the battery wire on the wire converter for the 09 aspen without 7 pin connector? Other basic converters dont have it. | Powered trailer wiring harnesses like # 118390 have a direct connection to the battery for 2 reasons....
7-Way Adapter Wire Connection Pin Locations on 2009 Chrysler Aspen
I have a 2009 Chrysler Aspen that has both the straight 4 pin trailer connector and the 7 pin connector with the blade connections. The person I bought it from wired it to the 4 pin connector which worked fine but I went ahead and changed it...
Replacement Trailer Wiring Harness Recommendation for 2008 Chrysler Aspen
I have this installed on a 2008 Chrysler Aspen. It has been installed for over a year with no issues. Recently the lights were very dim on the trailer. Also the left taillamp on the vehicle would stay on even with the vehicle off and trailer...
What is the Best Trailer Brake Controller for a 2007 Chrysler Aspen
i have a 2007 chrylser apen 4wd. i will be towing a 1500 pound trailer with 1500 pound load-total of 3000 pounds. should i buy tekinsha prodidgy, P3, or Valley odyssesy | I would recommend the Tekonsha Prodigy P2, # 90885. It is easy to setup...
Will Roadmaster Rear Anti-Sway Bar # RM-1129-126 Fit a 2007 Chrysler Aspen
Will this bar also fit my Chrysler Aspen, which is basically the same as the Durango? | I spoke with my contact at Roadmaster and he said that the Roadmaster Rear Anti-Sway Bar, part # RM-1129-126, that fits the 2007 Dodge Durango will also...
Can 4,000 lb Floor Jack with Stands # PTW1605 Be Used When Storing Trailer for Jack Stands
To preserve the tires am I correct that I will need 4 stands during long term storage? | The trailer jack would hold the front of the trailer and then the two stands of the 4,000 lb Floor Jack with Stands # PTW1605 would hold the other end of...
Electric Radiator Fan Recommendations for a 2008 Chrysler Aspen with 5.7L Engine
I have a 2008 Chrysler Aspen and would like to replace the stock radiator fan and shroud with an electric setup. How can I determine which fan/shroud setup would give me adequate cfm output for the 5.7L engine 4wd model? Ive been looking at...
Forest River LED Trailer Light Replacements
I have a 2004 make: forest river model: haulin trailer and I want to replace all exterior and interior lights with LED. I also want to replace the vent as it is cracking. Id like to diamond the fenders as well. Brake lights: I measured them...
Availability Of Replacement Face For Control Panel For Lippert Ground Control 3.0
Can I buy just the plug-in face for my control panel? | I have complete replacement option for you, but unfortunately the face of the control panel for your Lippert Ground Control 3.0 and Travel Trailer RV Leveling System is not available separately...
Engine Block Heater Recommendation for a 2008 Chrysler Aspen with Hemi
Will this block heater fit a 2007 Chrysler Aspen V8 Hemi? | The only style of engine heater I can recommend for your 2008 Chrysler Aspen with a Hemi is a magnetic pad like the part # KH24100. There are no cartridge style heaters available. |
How to Add Reverse Light Circuit to Trailer and Two Tow Vehicles
Hello: I have my tow vehicle wired with a 4 flat and 7 way. I have a trailer that uses a 4 flat that I would like to add reverse lights to but, I still want to have the 4 flat pin connection as another vehicle that may also tow the trailer...
Will Ultra-Fab Motor Home Trailer Hitch # UF35-946401 Fit a 2008 Chrysler Aspen
will this hitch will fit a chrysler aspen 2008 bumper | The Ultra-Fab Motor Home 2-Inch Trailer Hitch, part # UF35-946401, is intended for installation on the rear of motor homes that have an exposed 4-inch bumper. Installation requires that...
Is The Lippert Electric Stabilizer # LC298707 A Compatible Replacement For The # 198641
2013 PrimeTime Crusader 5th Wheel. Is the LC298707 jack an exact replacement fit for the LCI Model #198641 and will the motor fit either jack? | The Lippert High-Speed Power Stabilizer Jack # LC298707 would be a great replacement option for...
Locating Reverse Circuit for a Peak Wireless Backup Camera on a 2007 Chrysler Aspen
which wire is the hotwire for the backup light on a 2007 chrysler aspen | The only way to be sure which wire is the reverse light circuit is to test the wires with a circuit tester like part # 3808. Pull the tail light of, and have someone...
Recommended Tire Chains for 2008 Chevy Silverado with 225/75-17 Dual Tires
hello Im looking for a set of snow chains for my 2008 Chevrolet Silverado dually 225/75/r17 | The Titan Chain Snow Tire Chains part # TC4219CAM are what I recommend for a 2008 Chevrolet Silverado with 225/75-17 Dual Tires. These chains are actually...
Troubleshooting Slack in Performance for Demco Hijacker Autoslide
I have 18k Demco high jacker hitch. I have had no issues until now. I have the familiar clunk when turning. Now I am experiencing slack in the ion boss. Quite noticible in a start stop circumstance. Is there adj. for this or is it worn parts...
Which Hitch, Trailer Wiring and Ball Mount are Recommended for a 2008 Chrysler Aspen
what trailer hitch, trailor wiring, ball mount is recommened for a 2008 chrysler aspen?? | I think the best and easiest to install hitch would be part # 13296 from Curt. It has a 600 pound tongue weight and 6,000 pound gross towing weight capacity. The...
Fit of Hitch Covers and Ball Covers on 2-Inch Hitch on 2007 Chrysler Aspen
we have a 1inch and seven-eights ball. will a 2 inch hitch cover fit | If you want a cover for your actual hitch ball itself you can use # 42250 or one of the others shown on the included link. In the case of your 2007 Chrysler Aspen the only...
Mounting Tab Width Range for Blue Ox Acclaim Tow Bar # BX4330
Your info states base plate needs to be at least 23inch spread apart. What is the furthest distance that this bar can be spread apart? | The Blue Ox Acclaim Tow Bar # BX4330 that you referenced can be used with base plate kits that are between...
Correct Adapter for 5th Wheel to Gooseneck Conversion with a Recessed Ball
I have a F350 crewcab skirted flatbed with a recessed ball. it appears to be 1inch below the bed, so it seems that I may have to go with a C-A-B instead of converting with the in-bed adaptor to 5th wheel hitch. Any suggestions are appreciated...
Dexter E-Z Flex Rubber Suspension System # K71-653-00 Fitment on 2005 Outback 28RSDS Trailer
Hi, I own a 2005 Outback 28RSDS which has, I believe, AlKO axles. Id like to replace the shackle plates and bolts and equalizer with this Dexter kit. Will it work properly with this system? If so, I assume the nylon bushings in the spring...
Filter Your Search
Contact and Help