Tonneau Cover That Fits 1968 Chevy Elcamino 6 foot Bed
68-72s are supposed to be somewhat interchangable. Id like to know if this #252198 would fit also? | The Craftec Tonneau Cover part # 252198 that you referenced does fit 1968 through 1972 Chevy El Caminos. This would be a confirmed fit for...
Can Tonneau Cover for 1986 Chevy El Camino be Latched Since Tailgate Latch is on Inside
HOW DO YOU UNLOCK THE COVER TO OPEN IT DUE TO THE TAILGATE LATCH IS ON THE INSIDE OF THE TAILGATE ? | You basically would have to keep the latches open on the tonneau all the time so that you could lift the tonneau at any point. Otherwise you...
Craftec Tonneau Cover for a 2003 Ford Explorer Sport Trac
I have a roll up cover that will no longer seal to the velcro on the sides of the bed. Will part# 153731 fit my vehicle? | Craftec Tonneau cover # 153731 will fit your 2003 Ford Explorer Sport Trac. You will need to completely remove all of...
Will Air Get Under the Craftec Hatch-Style Tonneau Cover # 251103 When Driving and Raise Cover
hello just wanted to know will the cover stay flat and smooth when driving? would not like it if air get under the cover and make it buffy will the cover get air under it and raise up when driving that is my question...
Will Craftec Tonneau Cover, Part #554735, Fit 2011 Toyota Tacoma with Factory Tie-Down System
I have a 2011 Toyota Tacoma double cab with a 5 foot box. The box has a factory installed rail system at the rim of the box which has moveable tiedown eyes. Can I install the Craftec tonneau cover on my truck? Or does the rail system and tie...
Will the Craftec Soft Tonneau Cover part # 351132 Fit a 2015 Ram 1500 6 foot Bed
What bed length does this cover fit? | The Craftec Soft Tonneau Cover part # 351132 that you referenced is a confirmed fit for your 2015 Ram 1500 with a 6 foot bed so it would work well for you. |
Lockable Tonneau Cover Recommendation for a 1998 Toyota Tacoma with a 6 foot bed
does any of your tonneau covers lockable? | Check out the Access Tonneau Cover # 834532000432. This cover uses a single latch with a slide lock that will prevent the cover from being opened without the tailgate first being opened. So if you...
Craftec Hatch-Style Tonneau Cover Recommendation for a 2001 Ford Ranger with Step Side Bed
I have a 2001 Ranger xlt 4 wD 4 door. Step side with flared rear wheel wells. Is this the right cover for me. Also have bed with rail cover, I read simple cutting will permit this use. Am I missing anyting or is this the right part? Thank...
Recommended Tonneau Cover For 1999 Nissan Frontier With King Cab
I have an over-the-rail factory installed bed liner now en my 1999 Nissan Extended cab pickup! If I was to buy this cover, why would I need the bed liner anyway???? | If you have a 1999 Nissan Frontier with the king Cab, we do have several Tonneau...
Does Vinyl Cover On Craftec Hatch-Style Tonneau Cover Come Installed On The Frame
Does vynle come attached to frame of the top of bed liner all ready. | When you are installing the Craftec Hatch-Style Tonneau Cover, part # 551129, it will come disassembled in a box. You will then put the frame together and do your test...
Color and Quality of Craftec Hatch-Style Tonneau Cover, # 153923 for a 1998 Ford Ranger Stepside
Does this cover fit a 1998 Ford Ranger Step-side, 2 wheel drive Splashbox? What is the #8740 alternate mentioned and what are the differences between the two? I want to make sure I get the right one. Will it hold up under snow and ice? Is the...
Will Access Tonneau Cover # 834532004676 Fit a 2003 Toyota Tundra SR5
does this tonneau cover fit 2003 toyota tundra sr5? | The Access tonneau cover # 834532004676 will fit all models of the 2003 Toyota Tundra, including your SR5, that have a 6 foot bed, stepside only, with or without bed caps. I have included...
Craftec Tonneau Cover Recommendation For 2004 Ford Ranger
Do you offer any of the options for these tops that the Craftec Company offers on their website. I was looking for the 3 Ply Black Max material for mine? Thanks, | The Craftec Tonneau Cover we offer for your 2004 Ford Ranger if it is not a Stepside...
Fit of Craftec Hatch-Style Tonneau Cover # 351232 on 2005 Dodge Ram 1500 Long Bed
will this cover #351232 fit my 8foot truckbed? | The Craftec Hatch-Style Tonneau Cover you mentioned, part # 351232 will fit your 2005 Dodge Ram 1500 Series truck with the 8 foot long bed. For installation details, click the provided link. |
How Weather-Resistant Is Craftec Hatch-Style Tonneau Cover
How does this cover do in the wind and rain. Ive seen a lot of soft covers flapping in the wind so I know water probably gets in. I have 2000 dodge dakota ext cab 6.5 ft bed. | The Craftec Hatch-Style Tonneau Cover, part # 352128 is a one-piece...
How Does a Craftec Tonneau Cover Attach to a 2002 Ford Explorer Sport Trac
description says that it clamps to the side rails, I have an 2002 explorer sport trac and they dont have side rails do to the composit box | The term side rail is referring to the tops of the bed sides. If you take a look at the picture I have...
Will Craftec Tonneau Cover Fit a 1998 Ford Ranger Stepside with Side and Rear Rail Caps
1998 Ford Ranger Stepside with side rail covers and tailgate rail, the truck has no front bed cap, do i need a front bed cap to level out with side caps ? How much trimming is required on ths side rail caps plastic and with what tools do i...
Tonneau Cover Recommendation for 1972 Chevy El Camino
I saw that craftec offers a heavier duty cover as an option. Is that something you have available? | I checked with Craftec and the only tonneau cover they offer for your 1972 Chevy El Camino is the part # 252198 that you referenced. This is...
Tonneau Cover For 1967 Chevrolet C-10 Pickup Truck With 6-Ft Bed
What is the correct tonneau cover for a 1967 C10 stepside 6 foot bed.? And is there any other colors to choose From? | We offer one Tonneau Cover that is designed to fit your 1967 C-10 truck with a 6-ft bed. It is the Craftec Hatch-Style Tonneau...
Tonneau Cover to Fit 1970 Chevrolet El Camino
do you have correct fitting tonneau for my 70 chev el camino | As a matter of fact we do. The Craftec Hatch-Style Tonneau Cover # 252198 is confirmed to fit your 1970 Chevrolet El Camino. This tonneau cover has a light aluminum frame and gas...
Fit & Compatibility of Craftec Hatch-Style Low Profile Tonneau Cover 551129 on 2003 Toyota Tundra
Was the 6foot bed dimension referenced a nominal size. I measured the bed on my 2003 SR-5 and it is 64. Will part #551129 fit it? The old cover that I have has a frame length of 6foot 6inch and a width of 57inch I noted that it wont fit...
Will Craftec Hatch-Style Tonneau Cover # 153923 Fit 2000 Ford Ranger Stepside With Bedliner
Will the hinged tonneau cover, part #153923, correctly fit on a 2000 Ford Ranger XLT Flareside/Stepside pickup with a bed liner installed? Also, can one person install it with a minimally-skilled helper? Itll be installed by a mom-and-daughter...
Tonneau Cover Option for a 1980 Toyota Pickup
I am interested in your product, but there is no listing for the width dimension of the cover. The Craft Tech description states will fit 84 1/2inch bedsfoot under the 1990 Toyota pickup listing. I have a 1980, now II know it is not made for...
Tonneau Cover for a 1956 Chevrolet C/K Series 6-Foot Stepside Bed Pickup
do you offer a cover for a 1956 chevy stepside with a 6 1/2 foot bed? | The Craftec Hatch-Style Tonneau Cover for your 1956 Chevrolet C/K Series pickup with 6-foot bed stepside bed is indeed the item you referenced, part # 251185. This cover...
Filter Your Search
Contact and Help