How Much Power/Amps Does the Tekonsha Prodigy P3 Draw
Can you tell me what a typical initial surge current Amps or power Watts is for a Tekonsha P3 brake controller when brakes are initially applied? Im mostly running this with a single axle trailer, but will occasionally use it with double axle...
Brake Controller Recommendation for a 1976 Dodge RM300
My question is, what type of brake controller do I need for a 1976 DODGE RM300 RV CHASIS? Since the vehicle isnt setup like a newer plug an play vehicle, is there a certain type of controller I need. Thanks for your time! | For a brake controller...
What is Correct Placement Of Goose Neck Hitch Ball in Full Size Pickup
where in the bed does the ball have to be front to rear ? over the rear axle,slightly in front the rear axle or can it be 8inch to 10inch behind rear axle??? | A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter,...
Nerf Bars That Fit 1978 Dodge W150 Truck
Looking for mounting brackets for my Westin 3inch Nerf Bar/Step that Im looking to mount to my 1978 Dodge W150. | There is an option to add nerf bars to your 1978 Dodge W150 truck, though I checked with Westin and they do not have a fit, and...
Curt # C15845 Dimensions - Clearance and Mounting Bolt Spacing
We have an aftermarket bumper on our truck and Im trying to see if this hitch will work with it. What is the clearance from the top of the receiver tube to where it mounts on the frame? Also, what is the horizontal clearance of the mounting...
Parts Needed To Install A Brake Controller On A 1980 Dodge W400 PowerWagon
Hi. Transfer for info regardig e- break installation. Please advice 25000 / 30000 lbs 2,5 inch squash bolt reciever hitch assebly / steel construction for ny Dodge W400 PowerWagon. | If you're referring to what you need to install a trailer...
Hitch Recommendation for a 1976 Dodge M-class Motor Home
Do you have a trailer hitch for a 1976 Dodge M-class motor home? Sportsman American Clipper. | For your 1976 Dodge M-class motor home we don't have any custom fit hitches available, but we do have a multi-fit hitch that should work as long as...
Recommended Air Brake to Electric Brake Controller for 1969 International Loadstar 1890 Truck
which controller would give better performance I have noticed that instead of using a brake controller like this one, 1300-80, it is recommended to use the , # 90885, brake controller. Is the electric brake controller as consistent with braking...
How to Measure to See if Curt Hitch part # C15300 will Fit Truck
My 1968 dodge D100 has a frame width outside of chassis both sides of about38 or 38-1/4. I was told I needed the c15300 here but the width youve stated in the QandA is 37-1/4. Am I missing something? Thanks | What you will want to do is...
How to Determine if Wheel Will Fit on Trailer
Hello, before I order this wheel want to be sure it will fit | I'm happy to help you figure out if the Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black # AM20766 will fit on your trailer. In order to determine...
Is The CIPA Universal Door Mount Mirror A High Quality Glass Mirror
You said the CM45000 has a glass mirror thats high quality. Is the CM94500 also a high quality glass mirror? | The Replacement Mirror Head for CIPA Universal Door Mount Mirror - Stainless, part # CM94500, does appear to be glass. We have not...
Can Bulb be Replaced on Peterson Red Flush Mounted Sealed Turn Signal Light 435800
is bulb replacable on this light? what is replacement bulb # | Peterson brake/turn signal light # 435800 is sealed and cannot be opened up to change out the bulb. I pulled one from the warehouse to verify this and cannot get the lens off (without...
Tekonsha Voyager Light Not On When Leveling
I just installed a this 9030 voyager brake controller, and went to level it out per the instructions. When I set the gain to max, depress the brake pedal, and then slowly move the delay forward, I don’t get a change in the light color. It stays...
Can Peterson Round Flush Mount Trailer Light be Installed in 1/8 Inch Thick Diamond Plate
i am mounting tail lights in 1/8 diamondplate. is this the product i want? i just want to cut the holes and mount with a rubber grommet. i do not want to have to attach light in back or anywhere else. your video explains nothing about mounting also...
Trailer Hitch Availability for 1967 International Travelall 1200B 4x4 3/4-Ton Panel Truck
Have a 1967 International Travelall 1200 B which is a 4x4 3/4 ton panel truck. Would like to have a hitch similar to the Curt p/n 15320 that I installed on my Chevy because I have a spare tire mounted underneath the rear similar to the Chevy...
What Tire Chains are Good on Ice and Will Fit Both 235/75-15 and 225/75/15 Tires
will these chains fit my 235x75x15 and 225x75x15 tires? | The Titan Chain Snow Tire Chains w/ Cams part # TC2819CAM that you referenced will fit your 235/75-15 tires but not your 225/75-15 tires. The reason for this is because the 235/75-15...
What Are Dimensions of Spacer Tubes Included in Reese Super Titan Hitch # 38208
What are the dimensions of the spacer tubes? | According to my contact at Reese the four spacer tubes included with their Super Titan 4000 Trailer Hitch # 38208 measure 15-inches in overall length and have a cross section that is 3-1/2 x 3-1/2-inches....
What Size Socket is Needed to Tighten Trailer Hitch Ball # 19286
What size socket is needed for this 1-7/8inch nut? | You will need a 1-7/8 inch deep well socket for the 1-7/8 inch nut on ball # 19286. To install the ball you can use a bench vise to hold it while torquing down the nut or if a vise is not...
Correct Westin Replacement Rear Bumper for 1978 Dodge Full Size Pickup
Will this fit a 1978 Dodge Pick up | The correct Westin Fey Diamondstep Rear Bumper for a 1978 Dodge Full Size Pickup is part # 20000-92230. This kit comes with both the rear bumper and the custom fit brackets you need to use to attach it. The...
Adjustable Hitch for 1972 Winnebago Brave with Modified Frame
Im looking for a class 5 hitch with 2inch receiver for my Winnebago. There is no ion and the specs are hard to find. The Frame rails C-channel outside to outside at the rear are 34 inches apart, and are 1.75 wide at the rear section. Welded...
Can the Side or Traffic Cameras on the Furrion Vision S Wireless Camera System Be Adjusted
The side camera view at the rear of the camper are aimed 1 1/2 ft away from the back of the camper. It says they are not adjustable. Is there a shim kit that would help aim the cameras, so they so straight back along the side of the camper?...
5th Wheel Install Kit Rail Placement on a 1975 Dodge D200 Long Bed
I have a 1975 Dodge D200 2 wheel drive with 8 foot bed. what is the measurement from end of bed to rear base rail. I am installing a Reese 14k 5th wheel hitch with universal mounting kit. | Using Reese universal installation kit # RP30035 on...
Truck Bed Bike Rack That Isn't Fork Mounted That Works With A 1966 Dodge Pickup
I currently have the Swagman Pickup bike rack with fork mount. Im wondering if I can get the G1025 to convert it to a wheel mount so I dont have to remove the front wheel. | The Replacement Wheel Holder for Swagman G10 Bike Rack # G1025 unfortunately...
When Using the Redarc Tow-Pro Elite In User Controlled Mode Does the Power Ramp Up or Apply Instant
This looks like the perfect controller for my needs: running a trailer with 12V electric brakes from my 24V antique military truck. I also like the small knob on the dash with the main controller mounted remotely. I do have one question: when...
Filter Your Search
Contact and Help