Does Draw Curt 13313 Have Capacity for 3,200 lb Boat
Hi, Was wondering if this would be suitable to tow a boat and trailer weighing 3200 lbs? Also does it come with the wiring harness and instructions how to install? | The Curt trailer hitch part # 13313 has a 3,500 lb towing capacity so it could...
Does Curt Trailer Wiring Kit for 2007 Mitsubishi Endeavor Work with LED Trailer Taillights
I have a 2007 Mitsubishi Endeavor AWD. I purchase a new trailer with LED lights on it. The plug works ok when plugged in to a trailer with regular lights but does not work when plugged in to the new trailer plug that has LED. Does your wiring...
Trailer Wiring Harness for 2004 Mitsubishi Endeavor
Im thinking about getting T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - Mitsubishi Endeavor, 2004 My Endeavor does not have the trailer package. I was reading on other sites that their cable would not work because I did not...
Where Does the 4-Flat Connector from Wiring Harness # C56039 go on a 2010 Mitsubishi Endeavor
Maybe it will be evident after I open the car up, but is there a slot to fish the wires from inside the vehicle to the undercarriage? Documents only describe connection inside the car. | There may be an access point to fish the 4-flat connector...
Installing Hopkins Wireless Backup Camera HM50002 in 2005 Mitsubishi Endeavor
I have an 2005 mitsubishi endovor can I install this unit | The Hopkins Smart Hitch Backup Camera # HM50002 will plug in on any vehicle that has a 7-way trailer socket with a round U.S. Car plug-in connector at the rear. The photo I linked...
Where Does the White Wire of the Curt Wiring Harness # C56039 Go on a 2011 Mitsubishi Endeavor
no directions to do what with white wire lug connector on factory plug side | The white wire you referenced actually needs to get run to a clean metal surface on the body of your 2011 Mitsubishi Endeavor with the included self tapping bolt through...
2006 Mitsubishi Endeavor Trailer Hitch Compatibility with Other Model Years
Will a 2008 Mitsubishi endeavor receiver hitch fit on a 2006 ? | If you have the Curt # 13113 on your 2008 Mitsubishi Endeavor, it will be compatible with a 2006 model. This hitch will fit 2006-2011 model years of that vehicle. I've attached...
Brake Controller Recommendation for 2007 Holiday Rambler Endeavor
What harness number do I need for a for prodigy controller to fit a 2007 holiday rambler endeaver | The brake controller wiring you need is terminated in a connector under the left side control panel next to the driver seat of your 2007 Holiday...
Does Malone Roof Rack MPG216 Fit 2005 Mitsubishi Endeavor
Your add claims that Air Flow 215 fits the 2005 Mitsubishi Endeavor. I have tried cross bars said to fit the slot, and have looked at dimensions of others that are clamp fits. The cross bars in-slot mount fixture was 1/2 inch and my slot was...
Electric Brake install 2000 Coleman Sedona
I've confirmed my bearings are 44643 for inner and outer. Ive also got the 5 on 4-1/2. So I would like a list of parts for the Electric Brakes for the 2000lb Dexter Axle. Ill need the Hub/Drum. Could you include Wiring in this as well for a...
Troubleshooting Brake Light Issue with Modulite Wiring # C59496 on a Mitsubishi Endeavour
I installed the C59496 wire harness kit for my 2010 Mitsubishi Endeavour. I then connected my camper trailer. The running lights and blinker work. However, the brake lights are always on...on the trailer. I disconnected reconnected everything...
Brake Controller Option for Towing Camper with Several Different Vehicles
I need to tow the trailer with the electrical braking with several vehicles and od not want to install a control unit in each vehicle. Can I install the control in the trailer itself? It is a camping trailer with its own battery so I have...
Electric Brake install 2000 Coleman Sedona
I have a 2000 Coleman Sedona popup camper. Ive verified it has the Dexter 2000 lb axle. Ive also verified it has the backing plate with 4 holes on each side behind the tires so it will accept electric brakes. Currently it doesnt have any brakes...
How to Install Trailer Wiring on a 2004 Mitsubishi Endeavor Pulling a Boat Trailer with a 5-Way
I have a 2004 Mitsubishi Endeavor. My boat trailer has a 5 wire system. Can this wiring kit convert to the five wire plug? Trailer has a brake activation system. | Yes, the fifth wire on your boat trailer is most likely a reverse lock-out...
Replacement Hardware Kit for Trailer Hitches
Hi I have a 2008 Mitsubishi endeavor installing hitch looked under it missing the bolts all of them I guess someone removed the hitch and never put bolts back in question do you sell the hardware kit for it | Yes, we offer the Replacement...
Right Side Trailer Lights Not Working After Installing a Wiring Harness on 2011 Mitsubishi Endeavor
ordered 2011 Mitsubishi wiring harness from e-trailer for my suv. . also ordered trailer hitch which is working great, installation was a breeze for both. only one side left of my trailer lights are working. would poor grounding cause...
Will a Trunk Mount Bike Rack Fit on a 2008 Mitsubishi Endeavor and Not Scratch It
Wil this bike rack work on my 2008 mitsubishi endeavor and not scratch it? | The Thule Passage trunk mount bike rack # TH910XT is a fit for the 2008 Mitsubishi Endeavor. However, it is possible that this or any trunk mount bike rack can cause...
Bolts Provided with Hitch Will Not Fit in Nuts Welded Into Vehicle Frame
Bolts seem to not fit.. Seems to be too big for the holes in my vehicle. Dont know if wrong size bolts were sent or what bt my question is what size bolts are required for a 2005 Mitsubishi Endeavor trailer hitch? | Your Curt # 13569 Class III...
Recommended Trailer Wiring Connector On 2004 Holiday Rambler Endeavor
I am not the original owner 2004 Holiday Rambler Endeavor - the wiring has been cut leaving the wiring cut with blunt ends = is there any way that I can get the correct wiring colors to install a 6 pole male connector. My trailers are all 4...
What is the Torque Rating When Installing 7 Inch Brake Assembly to Brake Mounting Flange
I wanted to know what I torque the nuts to when attaching the 23-48 part to the square flange on my trailer? In the video I dont see them using a torque wrench but Im sure there is a best practice for this when tightening them up. Thanks. |...
Hitch Recommendation for a 2004 Mitsubishi Endeavor
So I want to buy the hitch for a 04 endeavor and Im curious about your return policy. Also since I intend to install the unit myself what options do you have as far as trouble shooting install problems or something else. | The Draw Tite Hitch...
Which Roof Mounted Ski and Snowboard Carriers Will Fit a 1998 Chevy Tahoe with Factory Roof Rack
Which Yakima Vertical Mighty Mounts for ski racks will fit the factory cross bars on a 1998 Chevrolet Tahoe. | According to Yakima, with factory crossbars on your 1998 Chevy Tahoe, you need to use Universal MightyMounts for Yakima Ski Mounts,...
Is the Yakima SkyBox Rooftop Cargo Box # Y07336 Completely Waterproof
Is this box waterproof? | In the strictest sense of the word, "waterproof" would mean water absolutely cannot enter a product. In reality there will always be some circumstance where some moisture could enter a product like a cargo box, even...
Hitch and Wiring Install Instructions for a 2011 Mitsubishi Endeavor
do you have a video on connecting the trailer wiring kit on 2011 Mitsubishi Endeavor. | The recommended trailer wiring harness for your 2011 Mitsubishi Endeavor is the Curt Harness part # C56039. We have not had the chance to install this harness...
Filter Your Search
Contact and Help