Hitch Recommendation for a 2015 Toyota Tacoma
any hitches for the 2015 Toyota Tacoma | Yes, the Curt Hitch part # 13323 that you referenced has been confirmed to fit all models of the 2015 Toyota Tacoma so it would fit yours. I attached an install video for this product for you to check...
Replacement Powered 4-Wire Trailer Harness for 2010 Kawasaki Vulcan
Looking for a replacement for a TrailerMate taillight converter so my 2010 Kawasaki Vulcan Voyager can tow a trailer. My current converter has the standard four-wire output including the white wire. My current converter that died has the standard...
Winch and Custom Winch Mount for a 2015 Kawasaki Mule 4010
I'm looking for a winch and mount for a 2015 Kawasaki Mule 4010. Thank you. | For your 2015 Kawasaki Mule 4010 I recommend Superwinch # SW1130220 rated for 3,000 pounds. And for a custom fit mount that will fit the Mule and the winch you can...
Dimensions of Bulldog Winch Mount for 2016 Kawasaki Teryx
Will this fit over the receiver hitch from extreme metal products on the 2016 TERYX 2? | I reached out to a representative of Bulldog who said the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15176 measured approximately 9 inches wide,...
Superwinch And Mounting Bracket Recommendation For 2005 Kawasaki 700 Prairie ATV
I purchased a super winch a few years back when my old one was acting up it was supposed to mount to my 2005 Kawasaki 700 prairie but upon taking everything apart to install it the winch was too long and the mounting bracket would not fit. I...
Is Tire in Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel KR03 Model Tire
Are these the Kenda model KR03 tires? Kenda Karrier ST205/75R15 Radial Trailer Tire with 15 Black Mod Wheel - 5 on 4-1/2 - LR D Item # AM32424 | Yep, the tire is the KR03 model on the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black...
Winch Mount for Superwinch Terra 45 on Kawasaki Mule 4010 ATV
Hello...Have the task of mounting my new Terra45 to my 2014 Kawasaki Mule 4010 4wd. Is there a mount made? If so model number and if available ? Thanks... | For your 2014 Kawasaki Mule 4010 we have the Bulldog Winch Mount # BDW15106. This is...
Center to Center Distance Between Clips on K-Source Panoramic Aspheric Rearview Mirror # KSRM1300
What is the measurement center to center between the clips? | I went out to the warehouse to measure K-Source Panoramic Aspheric Rearview Mirror # KSRM1300 for you. The center to center distance between the clips is 3-1/4 inches. |
Recommend Recovery Winch for a Kawasaki 3010 Mule Trans 4x4 Diesel
I have a 3010 4 x 4 Kawasaki Mule. My need is the capacity to pull it up a 40 degree muddy creek bank. Understand the Mule weighs about 1400 lbs. Should I use a snatch block ? I would like to mount it permanently. Thanks, | I have the perfect...
Correct UTV Cab Enclosure for a Kawasaki Teryx 750
I have an 07 Kawasaki tyrex would your canvas cab for the 08 fit the 07 machine? | I checked with Classic Accessories and the Classic Accessories All-Weather UTV Cab Enclosure part # CA18020 is listed as a fit for a Kawasaki Teryx 750 till 2015....
Can a Superwinch Terra 45 with Metal Cable be Converted to Synthetic Rope
Hi, can I take a steel Terra 45 and buy the Superwinch synthetic rope, then simply replace the steel cable with the synthetic one? I understand that there is a mechanical break mechanism in the Terra 45 that could get hot and melt the rope!...
Custom Fit Winch Mount and Winch for a 2016 Kawasaki Teryx4 800 UTV
I need a mount and a winch for my 2016 Kawasaki Teryx 800. Will the LT2000 work? Which mount fits? thanks. | Yes, you can use the Superwinch LT2000 ATV winch # 1120210 on your 2016 Kawasaki Teryx4 800. All you will need is the proper mount kit....
Cab Enclosure Options for a 2008 Kawasaki Teryx
want to get some info on a 2008 teryx inclosed cab. | We have some accessories for the 2008 Kawasaki Teryx and Teryx 750. I have included links to the accessories that we do have. For the Teryx we have full cab enclosure in black, # CA18020. |
Winch Mounting Plate for Kawasaki 610 4x4 and Chicago Electric 3000# Winch
I understand that the mount fits the Kawasaki 610. I need info on its ability to mount the Chicago Harbor Freight Model 95912. The mounting plate that comes with the Winch is 7.086 Long x 4.881Wide X 2.165 High. The screw holes on the mounting...
Will the Classic Accessories All-Weather UTV Cab Enclosure # CA18020 Fit a 2008 Kawasaki Teryx
Will this top cover fit any year terx? I have a 2008. thanks | I spoke with my contact at Classic Accessories and she stated that the All-Weather UTV Cab Enclosure, # CA18020, will fit all current models of the Kawasaki Teryx, including your...
Determining Function of Trailer Light Assembly with White, Brown, and Green/Yellow Wires
Hello. Got a set of 6in oval tail lights. Stop/tail/turn, Little confused on what wires go ware no instructions 3 wires, 1 white with red stripes, 2 plain brown,3 green with yellow stripes. Any help would be greatly appreciated, thank you...
Installation Of Brake Controller On 2016 Mercedes-Benz Sprinter With Tow Package
I have a 2016 MB Sprinter, I ordered it with the hitch package. I called MB of Tampa and they said that the harness for the brake controller is included with the hitch package. I watched your video for installing the controller on a 2013 Sprinter...
Goal Zero Yeti 3000 Generator Charging Time Using Solar Versus AC Power
How long is charging time | The Goal Zero Yeti 3000 Lithium Portable Power Station - 110 Volt # 287-38012 has a charge time of about 25 hours using the AC charging port. Solar charging gives you many more variables and can take anywhere between...
Replacement Fairlead for a Superwinch LT2500 Winch on a 2005 Kawasaki Brute Force 650
model LT2500DC12V will part#87-41340-01fit my 05 Kawasaki Brute Force 650 mount without any modifications ? one of my rollers got damaged. | If the mounting holes on your winch mount on your 2005 Kawasaki Brute Force are spaced 4-7/8 inches...
Will UTV Cab Enclosure CA18020 Fit 2008 Kawasaki Teryx 750 With Roof
Hi, We have a Kawasaki Teryx 750 4x4. It has a hard top on it. Can we use the #CA18020 with this? Or do you provide something that will? Thanks | The Classic Accessories All-Weather UTV Cab Enclosure # CA18020 will only fit your 2008 Kawasaki...
Winch Mount Compatibility With 2016 Kawasaki Teryx 2 Door
My Teryx is a 2016 2 door. I dont see anything listed on your web site for a 2 door version. Do you know if there is a difference in the front end for the mount/winch? Thanks! | I reached out to my contact at Bulldog Winch, and the Bulldog...
LT2000 Superwinch Custom Mount on a 2005 Kawasaki KVF 360 Prairie
Im trying to install a LT2000 superwinch on a 2005 Kawasaki 360 Prairie, I have the recommended adapter plate also. Do you have a picture of how it should look when finished as it looks like the winch is set up upside down when installed? Thanks,...
Will Trailer Suspension Hanger Kit # APT5 Fit a Trailer with 2-3/8 Inch Diameter Axle
Hi, Could I use this kit with a 2 3/8 axle I see the sizes are listed for 3inch axle but I have 2 - 2 3/8 axles that i am looking to mount on a trailer that needs the extra clearance and also needs the height to level out the trailer. | You...
Custom Winch Mounting Bracket for a 2018 Kawasaki Mule 410
Hello, could you recommend a mounting kit for my Mule 4010 2018 for a Warn advance 3000? thanks | We currently have one winch mounting brackets that is designed for your 2018 Kawasaki Mule 410 which is the Bulldog Winch Custom-Fit Steel ATV...
Filter Your Search
Contact and Help