Do Slipper Springs Come With Suspension Bolts
So I have a trailer that Im building and Im looking for the hardware that mounts the leaf springs to the trailer, I wasnt sure if the leaf spring came with it or not. | Slipper springs like the # SP-177275 and # SP-179275 include the nylon bushings...
Troubleshooting Trailer Bounce on a Triple Axle Trailer
I just purchased a 9 ton tri axle with slipper springs. I took it for attest pull around the sellers town with approx a 5000 lb load on it a VW Bug. It pulled fine got up to 35-40 mph. We unloaded and I headed home with the trailer and every...
Leaf Spring and Hanger Kit Recommendation for a Single Axle Trailer to Replace 37 inch Springs
have home made single axle trailer leaf springs are37 inches from eyey to eye 8 leaves per side and width is 2 inches wide do you have something like that | The longest double eye spring we carry is the # SP-210275 that is 27 inches long and...
Replacement Leaf Springs for 1989 TeeNee Boat Trailer
I have a 1989 TeeNee boat trailer. Id like to change the leaf springs but Im uncertain if SP-040275 is the right part, its seem to be closest to mine. The distance between my eye bolts center points is 29 1/2inch and front eye bolt to axle...
Recommended Hanger Kit for Slipper Spring # SP-178275 for 1,500-lb Axles
which hanger kit for leaf spring with radius end 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8inch Long Item # SP-178275 | The Single-Axle Trailer Hanger Kit # APS3SE is the correct kit for 1-3/4" slipper springs such...
Replacing Slipper Springs on Magic Tilt B16W Boat Trailer
I am replacing leaf springs , slip type on a magic tilt boat trailer B 16 W, it is rated at 1500 #. I would like to go to 2000 or 3000 type springs, I haul camping stuff thats heavy . They have 1 3/4 IN. 26 inch springs currently. I think...
Recommended Suspension Parts Needed To Build A Smoker Trailer
First off thank you for your time. I am building a trailer for a smoker i dont expect it to weigh more than 2000lbs with everything on it. I need leaf springs and everything that needs to go with them, trailer lights, trailer jackpreferably...
Will E-Flex Suspension System And Heavier Leaf Springs Stop Trailer From Bottoming Out
I have a 24 Cargomate enclosed trailer with tandem 4800 lb dexter axels. The current springs frequently cause my trailer to bottom out when I go over bumps. I am looking to change them out with 6 leaf springs at 5300 lbs as well as change...
Replacement Over-Under Conversion Kit For 3,500 Lb Axle On 2007 Fleetwood Trailer
What is a double eye leaf spring? I have a 2007 Fleetwood Utah, 23/8 axle and want to make sure this kit will work. Thank you | I have attached a helpful article about double-eye trailer suspension you can check out. Basically, the leaf spring...
Replacement Trailer Suspension For 1971 Aristocrat Starliner Travel Trailer
Hi, I am looking to replace the entire axle/wheel assemble as well as leaf springs on my 1971 Aristocrat Starliner trailer. This trailer is fairly rare and I am certain there is no specs online about the sizes and dimensions needed. I would...
Replacement Slipper Spring for Boat Trailer 1000-lb Axle
The spring that I took off of the trailer measures about 25 and 1/4 inch. and 1 and3/4 in. wide, The bolt hole measures 1/2 inch had a 1/2 inch bolt. This looks like the 24 and 1/4 inch slipper spring for 1000 lb axle. It says that the bolt...
How Much of a Slipper Spring Should be Sticking Out Past the Rear Hanger
How far should should the flat end of a 30 1/4 spring extend beyond the ring with no load on it the frame is upside down now | The flat end of a slipper spring should stick far enough through a hanger to allow for the full travel of the suspension...
What Would Cause Boat Trailer Leaf Spring to Flatten Out
could it be possible that a trailer with 2300 lb capacity,leaf springs be unable to handle a 20.5 foot pontoon.One side flattened out and caused tire to rub fender .We got them replaced with the only size that it would accomodate and it has...
Choosing The Right Replacement Boat Trailer Axle
I have a 1981 Cox boat trailer that is rated for 1000#. I would like to replace the galvanized axle, hubs, leaf springs, wheels and tires to a 1500# system. The axle is 58 hf to hf and 48 inch sc to sc. The slipper springs are 24inch bolt...
Leaf Springs and Shackle Straps for Triple Axle Trailer with 7-3/4 Inch Equalizers
Hello. I seen a post that you answered with detail and I am hoping you can help me. I installed 3 5200 axles with 7000 lb. leafs and equalizers. Some thing is wrong. The center axle is shifting towards the rear and the equalizers are hitting...
Suspension Solution for Trailer with 3,500 lb Axles to Smooth Out Ride Quality
Im looking at putting your SP-210275 springs on a trailer I am building to tow behind my jeep and on some trails. I am using the longer springs for a smoother ride...am I right. Also need to know which hangar kit to purchase. I have a 61/44...
How to Determine Axle Spacing on a 5,000 lb Tandem Axle Trailer
what is the distance between the two axel on a five thousands lbs axel kit as you know there is only one eye on the spring so I want to make sure I am welding my hanger at the right place | The exact axle spacing will depend on the hanger kit...
Recommended Torque Specifications for U-Bolt # SP01-160 in a Slipper Springs Trailer Setup
What should these be torqued when used with the TRTP200175 plate and the SP-039275 springs on a 2x3inch square axle? | Since the # SP01-160 u-bolts are 9/16 inches in diameter the torque rating is from 65 ft/lbs - 95 ft/lbs. I have linked a...
Parts Needed to go From 2,800 lb Lippert Axles to 3,500 Dexter Axles on Trailer
How involved is it to upgrade a dual braked axle RV travel trailer with 2800 lb Lippert axles to use 3500 lb axles? I presume you would need the new axles and matching springs, but would the old brake assemblies be useable? Also are there...
Replacement Slipper Springs 30 Inches From Center Of Spring Eye To End Of Spring
I have a boat trailer with a 5000 lb gross capacity. It has 30 inch slipper springsmeasured while still attached from center of bolt to end of slipper . 3 leafs and 1 3/4 in wide. Do you have springs that would fit my application? Thank you....
Can Lower Rated Leaf Springs Be Installed on a Trailer to Improve Ride Quality
Hello, I built a tear trailer that weighs 1200 lb and is equipped with a 3500 lb suspension axle and leaf springs rated at 3500 lb, that is. The ride, as you can guess, is extremely stiff and bouncy. Would it be safe to just change out the...
Are 5-3/4 Inch U-Bolts Long Enough for a 3 Inch Tall Axle and Slipper Spring # SP-040275
I have a rectangular section axle, the axle section is ~2inch x 3inch high and I want to make sure the SP01-160 U-Bolts will work with the 117594-G U-Bolt Plate for 2inch Square Axle and the 4-Leaf Slipper Spring - SP-040275. What is the...
How to Find Axle capacity of a Trailer to Choose the Right Replacement Slipper Springs
I have a 1997 magic tilt boat trailer with slipper springs that are rusty. I have measured the springs from center of the bolt eye to the end of the spring and it measures 31-inches. They a 4 leaf 1-3/4 springs with 9/16-inch bolts. How can...
How to Adapt CE Smith Trailer Axle Kit CE33201GA-HUB for 55-1/2-Inch Spring Spacing
Do you have an 1-1/2inch axel/hub kit similar to# CE33201GA-HUB with 55-1/2inch Spring center and 65-1/2inch Hub Face? Hubs are 5 x 4-1/2 | We do not have axle kits with a 55-1/2-inch spring center spacing but you can still use an axle like...
Filter Your Search
Contact and Help