Replacement Leaf Springs for 1989 TeeNee Boat Trailer
Published 04/13/2012
Question:
I have a 1989 TeeNee boat trailer. Id like to change the leaf springs but Im uncertain if SP-040275 is the right part, its seem to be closest to mine. The distance between my eye bolts center points is 29 1/2inch and front eye bolt to axle center is 14 1/4. What I have is a slipper, 1-3/4inch width, 9/16 eye. Any help would be appreciated. Thanks!
asked by: Katie
Expert Reply:
As leaf springs become worn, they tend to flatten out, which would explain the slightly longer dimensions of your existing slipper spring.
The correct replacement spring you need will depend on the capacity of your axle.
If your TeeNee boat trailer uses a 3500 lb axle, then the # SP-040275 is the correct replacement. For a 3000 lb axle, use # SP-040275. Leaf springs should be replaced in pairs.
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles
- Q&A: Tips for Determining Square Trailer Axle Capacity
- Q&A: Trailer Axle Weight Rating for 2 Inch Square Axle
- Shop: Bow Roller Assembly w/ Bells for 3" Wide Bracket - TPR - 1/2" Shaft - Yellow
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 8"
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Q&A: How Much of a Slipper Spring Should be Sticking Out Past the Rear Hanger
- Q&A: Slipper Springs and Slipper Bracket for a 28.5 Bolt to Bolt Trailer Mount
- Q&A: 30 inch Long Slipper Spring Recommendation for Boat Trailer
- Q&A: Replacement 32 Inch Leaf Springs for Trailer