Do Factory Bump Stops have to Be Cut to Install Air Lift Air Bags on a 1997 Lexus LX450
Hi! Do I need to hack off part of the bump stop for this installation? Please send install procedure specific for a 1997 Lexus LX450. | Yes you will need to trim away the factory bump stops to install Air Lift helper springs # AL60728 on your...
What Hitch do You Recommend for My 1962 Cadillac DeVille Convertable?
Looking for a hitch for 1962 cadillac 2 door convertible | I have a creative solution for you. Unfortunately, we do not carry a customized-fit option for a hitch on your 1962 Cadillac DeVille convertable. The only option we have is to use a...
Recommended Tire Chains For Off-Road And Snow Use On 1996 Lexus LX450
Please recommend snow tire chains for my 1996 LEXUS LX450. The truck has a 2inch lift for additional ground and tire clearance. Tires are Goodyear Wrangler Duratrac 265/75-16. The chains will be used on four wheels on snow and ice covered paved...
Brake Controller Installation on 2000 Cadillac DeVille
how do i install a C57672 brake control to a 2000 cadillac deville | You can indeed install a brake controller on a 2000 Cadillac DeVille. As a first step, you'll need to access the taillight wiring circuits. The best and safest way to do this...
Peterson PM436B License Mounting Hole Distance to License Plate Mounting Holes
What is the vertical distance from the mounting holes to the locense plate mounting holes? | The vertical distance you are looking for from the mounting holes of the # PM436B to the mounting holes for the license plate is 1-3/8 inches. |
Using H4 Headlight Bulbs with 3 Prongs on 1964 Cadillac with 2 Prong Receptacle
I have a 1964 Cadillac with has 2 low beam headlights and 2 high beam headlights. Im changing them from the stock sealed beam lights to h4 bulbs. My problem is one of the plugs is a 3 prong and the other is a 2 prong plug and the h4 bulbs are...
Draw-Tite VS Curt Class III Receiver
I have a 1997 Lexus LX450 with the Draw-Tite Class III receiver installed. It has been there for quite a while and is has rusted so I thought it was time to replace it. I would like some information on Draw-Tite vs Curt for the class III receiver....
Recommended Ball Mount Compatible With 1998 Cadillac DeVille
Purchased hitch for my 98 Cadillac Deville, having issues finding a ball mount that will clear my bumper, can you assist? Thanks | Based on the confirmed fit trailer hitch receivers we have for your 1998 Cadillac DeVille, I assume you have a...
Instructions for Drilling to Install Curt Trailer Hitch on 1996 Cadillac DeVille
Why and what do I. have to be drill to install this trailer hitch | Attached are the complete instructions for the Curt Trailer Hitch Receiver # C12052 for your 1996 Cadillac DeVille and I have attached some clips from the instructions that...
Replacement Windshield Wiper Blades for 1997 Lexus LX 450
Why is one 16inches and one 18inches when both should be 18? 1997 lx 450 is the vehicle. is the scrubblade bigger? and has clearance issues? | Actually, Scrubblade recommends the # SC87FR 18 inch blade for the driver side and the # SC67FR 16...
Is MagnaFlow Stainless Steel Catalytic Converter MF23223 Directional for Exhaust Flow
Hi im wondering since this is a direct fit converter for my 1991 Cadillac sedan deville is the airflow direction marked on the item mf23223 also does this include any hardware like clamps. Thanks in advance | The MagnaFlow Direct Fit Stainless...
Which Drawbar Should be Used with a Draw-Tite Hitch on a 1993 Cadillac DeVille
I am purchasing your custom hitch for a 93 Cadillac Deville. Will this drawbar work? Some of your drawbars list the vehicle that it would fit and I want to make sure Ill have no problems. Thanks | The hitch manufacturers recommend drawbars...
Hitch Placement of Draw-Tite Hitch part # 36287 on a 2001 Cadillac DeVille
Show a picture with hitch installed. My wife does not want to see the hitch when not in use. Thanks | We have not installed one of these on a 2000-2005 DeVille. I have included a link to the instructions that shows where the hitch is in relation...
Can I Tow a 17 Foot Boat with a 2002 Cadillac DeVille
Do I need to put air shoks on rear. Hauling a 1957 17 wooden boat | You must abide by the weight capacity of the hitch or vehicle, whichever is lowest. Adding air shocks or springs will not increase the capacity of the hitch and, unless Cadillac...
Is Transmission Cooler Needed for 2010 Ford Edge
Although my ford edge doesnt have towing pacage, it already got a trans cooler. I think the trans cooler on my car is the same trans cooler what Edge with towing package. If I tow a 3000# trailer, do I need an extra one? Thanks! | If indeed...
Towing Compatibility of 1969 Cadillac DeVille
Can a 1969 Cadillac DeVille pull and stop a 2500lb. Travel trailer? | The large motors in those old Cadillacs (in your case the 7.7L V8) will allow you to tow a trailer that is 2,500 lbs. If your vehicle brakes are in good working order you...
How Much Can a 2000 Cadillac DeVille Tow
2000 cadillac deville with trailer brakes how much can i tow | The towing capacity of a 2000 Cadillac DeVille is 2,000 lbs without the factory tow package or 3,000 lbs with the factory tow package. I have attached a list of parts below that...
What is the recommended Draw Bar for a 1999 Cadillac DeVille
what draw bar do i need for 99 cadillac deville i think it needs to be about 11 long with about a 4-5 rise the hitch came with the car but no draw bar | The manufacturer recommended drawbar for your Cadillac DeVille is part number 36063 which...
Trailer Hitch for 1998 Cadillac DeVille to Allow Towing Small Utility Trailer
I have a 1998 Cadillac Deville that I would like to use to pull a walk on utility trailer. I need to move some small furniture and a garden tractor. The trip is about 150 miles. Is this possible? | We do offer one trailer hitch receiver...
Minimum Accessory Shank Length for a Hitch on a 2002 Cadillac De Ville
What is the minimum shank length for a hitch mounted bike rack using this hitch, it is obviously recessed behind the rear bumper. | When we installed the Draw-Tite Trailer Hitch Receiver, Class II # 36287 on a similar Cadillac DeVille to your...
Why Would a 2004 Cadillac Deville Need a Trailer Wiring Harness With a Trailer Hitch
Hi ,I bought one of your hitches for my 2004 deville . Why do I need to buy the power inverter u sell for the trailer hook up wiring? I hooked it up without it. It works. Will I have problems down the road? Thank you. | The need for a trailer...
Remote Transmission Filter For 1959 Cadillac DeVille
Do you have 59 Cadillac Deville Transmission filter? Thanks | We carry a remote mount transmission filter that may work with your 1959 Cadillac. You can check out part # D13091. This kit comes with the filter, mount, temp gauge kit, OEM...
Left Signal on Trailer Flashes when I Indicate Right Turn
I have a 96foot LX450. When I signal a left turn all works as it should. When I signal right, the lights on the right side passenger side of the trailer go out and the left turn signal blinks on the trailer. All the lights work properly on...
Bolts and Hardware Needed to Install Draw-Tite Hitch Receiver on 1995 Cadillac DeVille
I have a Draw Tite Hitch 36185. I need the bolts and other hardware to install it. Do you sell them? | Yes, we do have a Replacement Hardware Kit, # RHK, available for the Draw-Tite Trailer Hitch Receiver, # 36185. You will just need to visit...
Filter Your Search
Contact and Help