Determining Which Trailer Hitch Receiver Will Fit A 1966 Chevrolet P10 Panel Truck
Hi, I am looking for a trailer hitch for my 1966 Chevy Panel Truck P10 it has the same wheel base as a 1966 Chevy short bed C-10 pickup truck. My question is will the hitch for pickup truck work on my truck without any modifications? ...
Recommendations for Cooling a C4 Transmission in a 1966 Ford Bronco Rock Crawler
I run a c4 in my 66 bronco rockcrawler. I am going to an aluminum radiator with no transmission cooler built into it. I have always ran an exterior cooler as well but feel I might need to add another or up grade. Any suggestions? I run 1 ton...
Will the MagnaFlow Cat-Back Exhaust System Install on a 1966 Ford Mustang Convertible
Will this system work on a connvertible 66 Mustang? | I spoke with my contact at Magnaflow and he told me that the Cat-Back Exhaust System, # MF15815, will fit the convertible model of the 1966 Ford Mustang with the 4.7L V8, but a slight modification...
Availability of a Trailer Hitch For a 1966 Ford F-100
Would this hitch fit behind a tag on a 66 Ford F-100? | We do have hitches available for your truck (see link) but none of them are designed to fit behind the tag (license plate). At this time I do not know of a Hidden or Stealth hitch that...
Where Does Draw-Tite Max-Frame Trailer Hitch Mount on 1966 Ford F-100 Frame
I have a 66 F100 short bed fleetside with a Mustang gas tank where the spare tire was, does this hitch fit inside or outside of the frame? | The Draw-Tite Max-Frame Trailer Hitch # 75034 actually mounts to the underside of the 1966 Ford F-100...
Powered Fans to Correct Cooling Issue with 427 Big Block in 1966 Chevrolet Chevelle SS
Have a 66 Chevelle SS with 450HP 427, auto trans, new 160 thermostat, and aluminum radiator and dual fan setup I believe to be by Champion. Just bought the car. Dont know the CFM of the fans, but they appear pretty small. The engine runs VERY...
Radiator Fan for 1966 Chevy Pickup Truck
Hi My pick up is running with a LT 350 with around 350 to 375 hp. 700r4 transmission with a transmission cooler and a/c cooler on the front side of the radiator. The radiator measures 25inch x 17inch coming up short on the width by 5/8 and...
Will Dexstar Rim AM20304 Match Existing Rims For 1966 Plymouth Satellite
Can the Dexstar AM20304 rim be used on a 1966 Satellite to match existing rims? | As long as the bolt pattern (5 on 4-1/2 inches) and offset (+.5 inches) fit then it should work. I would certainly double check your measurements and keep in...
Replacement Radiator Fan For 1966 Oldsmobile 442 To Help With Overheating on Highway
Can you explain what reverse rotation means and what it does. I’m looking for a fan that will keep my car cooler on the highway. It runs fine in the city but runs hotter on the highways. It’s only a 4 blade fan which are 4 inches wide. Will...
Trailer Hitch for a 1966 Chevy Impala
FRAME ON MY 66 CHEVY BELAIR OUTSIDE TO OUTSIDE MEASURES APPROXIMATELY 50 DO YOU HAVE A UNIVERSAL FIT HITCH THAT I CAN PUT ON THE CAR, BACK IN THE DAY PEOPLE WERE LOT DUMBER, I RECALL SEEING THESE OLD RIDES WITH THE HITCHES MOUNTED TO THE BUMPERS...
Is There a 16 Inch x 6 Inch Steel Wheel With 6 on 5-1/2 Inch Bolt Pattern
Chevrolet 16inch X 6inch Steel Wheel for 1966 C10 I need a wheel similar to Item # AM20514, but I need the diameter to be 16. Do you have it available or can you get it? I need two to replace two that are too bent to balance. Thanks | We...
Parts Needed to Flat Tow a 1966 Volvo 122S Wagon Behind a 2017 Honda Ridgeline
Flat Towing 1966 Volvo 122S Wagon Behind 2017 Honda Ridgeline I have an old Volvo I wish to tow behind a new Honda Ridgeline that has a tow kit, including a 2 inch ball. The journey is about 1000 miles with a vertical climb of nearly 9000...
Will Dexstar Conventional Steel Wheels Work With Disc Brakes
do these dextar rims youre selling for the trailers clear disk brakes or are these drum brake rims? | The Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat # AM20514 work with both drum and disc brakes. As long...
Recommended Bike Rack For A 1966 Ford Mustang
Which rack would be suitable for this car? | Nice car! For your 1966 Ford Mustang, I recommend using the: -SeaSucker Komodo Bike Rack for 1 Bike - Fork Mount # 298-BK1910-SV. This bike rack has a maximum carrying capacity of 45-lbs, and can...
How to Install a 5th Wheel Hitch on a 1966 Ford F-250
How do I install a fifth wheel hitch on my 1966 Ford F250? | I do have options for you but I would not have any exact instructions for installing a 5th wheel hitch on your 1966 Ford F-250. The installation process would need to be performed...
What is the Backspacing of the Dexstar Conventional Steel Wheel Part # AM20758
Can you provide the backspacing dimension for the #AM20758? | The Dexstar Conventional Steel Wheel part # AM20758 has a zero offset which means the mounting surface is centered in the middle of the wheel. The term backspacing refers to the distance...
How to Use CTEK 12-Volt Universal Battery Charger # CTEK56158 on Positive Ground Vehicle
My 1966 Austin Healey 3000 BJ8 is wired with positive ground. Will using this charger be an issue if the negative lead is connected to the negative battery post and the positive lead connected to the frame...or is an adapter required? Thank...
Compatibility of Derale Transmission Cooler On GM's THM-400 Turbo 400 Transmission
I have a 1966 C20 pickup with the original turbo 400 transmission .will part #D14201 fit my truck ? Will it have a hole for the drain plug and one for a transmission temp sending unit ? Thanks for your help . | The Derale Transmission Cooler...
Recommended Truck Bed Mat For A 1966 Ford F-100
Do you carry bed mats for a 1966 F100 long bed | While we don't carry any custom-fit options for a 1966 Ford F-100 we do offer universal-fit options like the DeeZee Universal Utility Mat for Trucks and Trailers # DZ85005. DeeZee also offers...
Is Derale Radiator Fan D17319 Standard or Reverse Rotation
Is standard rotation for a fan typical . I have a 1966 Oldsmobile 442.i noticed some fans are reverse rotation not clear which one to get | The Derale Radiator Fan part # D17319 is standard rotation. If you need reverse rotation the part # D17419...
What Tongue Dimension is Compatible with the Titan Model 60 # T43397007K Coupler for Drum Brakes
I see this is bolted to a 3inch tongue. What is the other dimension Height?? I need to replace my tongue anyway. What size steel tube should I use 3x? | The Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7K # T43397007K...
Hitch, Brake Controller and 7-Way Trailer Connector for 1966 Ford F-250
Hello, Im needing recommendations for adding brake controller and hitch to 1966 Ford F250, Im going to be towing a 2-horse trailer that weighs 3200 lbs and tongue weight 200. It currently has 7 pin on it that is frayed and I need to replace...
Truck Bed Bike Rack That Isn't Fork Mounted That Works With A 1966 Dodge Pickup
I currently have the Swagman Pickup bike rack with fork mount. Im wondering if I can get the G1025 to convert it to a wheel mount so I dont have to remove the front wheel. | The Replacement Wheel Holder for Swagman G10 Bike Rack # G1025 unfortunately...
Trailer Hitch Recommendation for a 1966 Ford F-100 With a Standard Bumper
What is a 10 inch bumper? The notes for this hitch say its for the 66 F-100 with the 10 inch bumper. I have no idea what that is. My truck has the original, steel/chrome, no-step bumper as installed by Ford. Will the Curt 13099 hitch work...
Filter Your Search
Contact and Help