Recommended Plow Mounting Bracket for 2014 Ford F-150 4x4 and Snow Bear Winter Wolf Snow Plow
Plow Mount for the truck is needed for a 2014 Ford F 150 4 X4 is it SB 397 - 0 to 0 or is it SB 397 - 105 | The Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-105 is the bracket kit you want. This bracket...
Recommended Jack Foot Pads For A 2016 Newmar Canyon Star 3710
We have a 2016 Newmar canyon star 3710. It has the equalizer leveling system. The jack feet are octagon shape. They measure 10inch from end to end on outside. Inside round hole is 8 3/4 to 9. Which model number pad do I need. Thank you | For...
Availability Of Snap Pads To Fit a 7" Square Landing Gear Leveling Leg
do you carry any 7 or 7.25 SnapPads ? I couldnt find any on your website. | We do carry the SnapPads # SP24FR4 which are designed to fit 7" square jack feet. This is a 4-pack but we also carry them as a Single # SP24FR if you only need 1 or 2. |
Availability of 4 Pack of SnapPad XTRA Kit for RV
Hi Snappad recommended the 9inch XTRA for my rig. You have Item # SP54FR4 and Item # SN84FR What is difference in these 2? Both say they are the 9 | Both of our part numbers # SP54FR4 and # SP84FR represent the same XTRA size/style SnapPad...
Which Snappads for 2025 Entegra Aspire
Can you tell me which snap pads I need for a 2025 Entegra Aspire. I was told by the factory that it is the same as the 2024. Thanks | Hey Bill, for a 2025 Entegra Aspire the correct Snappads would be the XTRA XL part # SP74FR which is for 12...
Correct Custom Mounting Bracket Kit for SnowBear Snowplows On a 2007 Ford F-150
I Have a 2007 Ford F150 XLT 4x4 WITH A 6 inch LIFT, Is this the kit I need for this truck ?? , The plow set up I have is a old manual plow . not a hydraulic SB397-105 And the crossmember - SB324-060. Thank you | The correct Custom Mounting...
Replacement Winch for my Snow Bear Snow Plow
I have a personal snow bear don’t know what the number is it a 2000 model I have the instructions but I don’t sayI was just wondering if I could get the winch I already have all the controls and whatever I just ordered those but the motor broke...
SnapPads For A 2023 Entegra Vision 27A With Octagonal Jack Feet
Which snap pads will fit the 2023 Entegra Vision 27a? Our pads on the stabilizers are octagon not round. | For octagonal jack feet we currently only offer 10" pads with part # SP64FR84. I recommend measuring the diameter of your 2023 Entegra...
SnowBear Plow Bracket Recommendation for 2000 Chevy Silverado Classic and New Body
how can i tell if i have the new or classic body style as snow bear is showing two different mount kits | The easy way to tell the difference between the C/K Classic 2000 Chevy Silverado and the new body is the shape of the front end. The old...
Installation of SnapPad XTRA Jack Pads for Lippert Leveling Systems
I understand these will fit my Lippert stabilization feet 6. However the installation has you placing them under the feet and lowering the arms till the feet pop into the pads. Lippert stabilization arms have an auto cutoff when they are met...
Which Front Hitch Fits 1998 Jeep Wrangler for Use with Snow Plow
I am interested in this for my 1998 Wrangler. First can you retain the original tow hooks with this application. Second, can this be used with a snow plow. It appeals to me because it does not cause issue with approach angles since it is...
How Do I Pair the SnowBear Replacement Remote # SB263-284 to My Snowplow Winch?
Will this remote work right out of the box or does it need to be paired or programmed? | I confirmed with my rep at SnowBear that the Replacement Wireless Remote # SB263-284 comes with 2-piece setup with a sending/receiving unit that are paired...
Snow Plow Compatibility with 1991 Jeep YJ Wrangler
Im trying to figure out a way to mount a Snow Bear snowplow that requires a 2inch receiver hitch. The only front mounted hitches I find on your site for this vehicle mounts on top of the front bumper. Im afraid this will be too high to mount...
Why are the SnapPad SnapJack for RV Scissor Jack Stabilizers Available in a 2 Pack Instead of a 4
Why don’t you sell them in a pack of 4 most all campers with scissor jacks come with 4 of them | The SnapPad SnapJack for RV Scissor Jack Stabilizers # SN65FR are made available to us from the manufacturer in packs of 2. I do not know their...
Recommended SnapPads For A 2004 National Dolphin Class A Motorhome
I have a 2004 National Dolphin and would like the snap pads to fit on this motorhome, You show NO LISTING for this vehicles | SnapPads are not fitguided for each RV because the jack feet on one model could be completely different on another...
How to Carry Canoe on 2004 Ford F-150 Towing Coachmen Trailer Trailer
D you offer or recommend any type of roof rack for a travel trailer to haul a canoe. Travel trailer is a coachman apex 151rbs. | Most of the Coachmen Apex travel trailers shown on their website include several common rooftop features like antennas,...
Replacement SnapPad For RV Jack Foot On A 2020 Keystone Outback Travel Trailer
rv jack snappad need 9Square Jack pad | We have a couple of potential options for you, however, we do not have any 9" square jack pads that you're needing. The closest square jack pad we have is the Replacement Pad for SnapPad Jack Stand Pad...
SnapPads Landing Gear Feet for 2015 Fleetwood Discover 40g
According to SnapPads I need PRIME model pads. My Motorhome is a 2015 Fleetwood Discovery 40G diesel pusher. My jack system is a Power Gear. Which SnapPads do I need to order? Thanks, | The SnapPad Prime size is the 10 inch round octagon size...
Snow Plow and Bracket Fit for 2002 Nissan Pathfinder
Will this part 5XM5 Universal Cross Member for SnowBear Snowplows fit a 2002 Nissan Pathfinder? | If you are looking for a bracket kit for installing a plow on your 2002 Nissan Pathfinder you would want the part # SB397-084 which is confirmed...
How to Measure Octagon Foot Pads for SnapPads
What is the correct way to measure octagon leveling jacks? I have a 2004 Gulfstream Sun Voyager. Thanks for your help. | To measure your octagon foot pads, you just need to measure your foot pad from one flat side, straight across to the other...
Options of SnapPad HiWay Jack Pads
what size snap pad for 2019 36UA open road | If your 2019 36UA Open Road has round 8" feet then you will want to use the # SP34FR4 SnapPad. This comes in a quantity of 4. For 10" round jack feet, # SP34FR64, and # SP34FR74 for 11-1/2". |
Will Front Mounted Hitch Fit 2020 Ford F-250 Super Duty Four-Wheel Drive
I'm looking to add a snow plow on my 2020 Ford F-250 Super Duty. Is there a front mount hitch you have that's a confirmed fit I can use? It's a 4 wheel drive. | Yes, we have a couple of options for front mounted hitches and snow plows as well....
Is the 5XM5 Universal Cross Member Needed for a 2016 Ford F-150 with Custom Mounting Bracket Kit
do I need crossmember bar with this mount for a 2016 f150 | The 5XM5 Universal Cross Member for SnowBear Snowplows part # SB324-060 is not required to install the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows part...
Recommended Front Mount Trailer Hitch Receiver For 1998 Chevrolet Astro Van
Do you have a front mount 2 hitch that could work on a 1998 Astro van I am very interested in mounting a snow plow. SnowBear ProShovel Actuator Snow Plow | I have an option for you, but there is not a custom fit front mount trailer hitch receiver...
Filter Your Search
Contact and Help