!Cherokee Alpha Wolf Travel Trailer  x   >   !Longview  x   >   Truma  x   >   Equal-i-zer  x   >  

I have a 2015 lariat f250 4x4 quad cab and I tow a 38’ travel trailer max weight 10500. Hitch is rated for 19000. I have a wdh rated for 1400 so if i times 10500 by 13 I’m good as far as tongue weight. My question is can/should I use airbags...

I have a 2018 F150 and a 2018 Ice Castle RV edition. I was wondering if this would fit my needs. Also I seen something I need to add to go along with the WD hitch. Could you send me the link? Thanks | The Fastway e2, part # FA94-00-1000, you...

Will this fit on a 14000 lbs equalizer weight distribution shank? | The Replacement 10K Ball Mount Tongue for Brophy Adjustable Drop Hitch # RTB1 has a 2-1/8" gap to fit the shank from your Equal-i-zer Weight Distribution System # EQ37140ET,...

I need a 48" hitch extension to tow my enclosed trailer behind my Silverado with a slide in camper. Do you have an extension for my trailer? | We have the TorkLift SuperTruss Hitch Extension # TLE1548 which will require you to have a TorkLift...

what is best. 1400 lb. blue or 1800 lb. black sumo spring to prevent rear sagging. 2006 Sequoia towing Lance 1575, Gross dry weight of 2775 | The Black SumoSprings Solo Custom Helper Springs # SS78DR having he higher weight capacity of 1,800lbs...

Ive noticed the aftermarket is about 5-7 inches lower vs oem. Which is better for the vehicle in terms of suspension and pulling power? Also is the oem a class 3? Thanks in advance. Forgot to mentioned mine has the foot activated hatch lift...

I want to purchase the equalizer hitch 10,000lbs for my 2016 Flagstaff Classic Super Lite travel trailer 35 ft. I will be pulling the trailer with my 2014 Toyota Tundra SR5 CrewMax truck. I just want to confirm that this hitch will fit my...

Sorry to keep bothering you but I am told I need a brake controller for my 2014 Toyota Tundra SR5 with hitch package. Will you please recommend your very best and next to very best brake controller that will work on my truck and 35 foot travel...

I have a 2015 Heartland 24BHS, with a GVWR of 6900 lbs, and my tow vehicle is a 1997 Dodge Ram 2500 cummins. I have brought the camper to a certified weigh station, and determined the actual weight to be 6350lbs and TW of the travel trailer...

What should I use for lubing my Equal-i-zer WDH to reduce noise? Last trip we turned heads and woke up the campground from noise of the WDH. | Equal-i-Zer recommends to lube the friction surfaces regularly with the: -Equal-i-zer High-Performance...

Hello, I have a 1500 Chevy Silverado 2WD it has a 6inch suspension lift on 35 inch tires. Need a brake controller, hitch, weight distribution with sway control for a 5000lb trailer and about 400 - 1000 lbs tongue weight etc... | For a hitch...

I drive a 2000 Dodge Ram 1500 and I have a 2010 Forest River V-Cross ST Super Lite 29VBH camper. The GVWR for this camper is 7,900 lbs, but the hitch weight is 907 lbs. Would I be able to use part# FA94-00-1000 to pull this? Thank you, | In...

Will this reduce the swaying of my Rpod 171? | When selecting a weight distribution system for your R-Pod 171, the key factor is the tongue weight (TW) of your towing setup. This means the total load of your trailer with all the gear and supplies...

It says that the thin walled socket is recommended...do I have to use it? | Although a thin walled socket, like part # EQ70-00-4800, is not required to install the hitch ball on the Equal-i-zer Weight Distribution # EQ37041ET, it will make the...

does this come with a shank? | The Equal-i-zer Weight Distribution # EQ37041ET does not come with a shank. This system has a tongue weight capacity of up to 400 lbs and there are three shanks compatible with that weight capacity, each of which...

Where is this made? | The Equal-i-zer Weight Distribution System # EQ37041ET referenced in your question is made right here in the USA. This is an excellent system that will do a great job of evenly distributing weight over the axles of your...

Which is the best Reese or Equal-i- zer hitch. My travel trailer is a 27 ft Outback. total length front to back bumber is approx.30 ft. Loaded weight 7600 lb.Toung weight 750 lb | The Equal-I-zer, # EQ37100ET, and Reese Strait-Line, # RP66084,...

Do you have an equalizer hitch shank that has another 2 inches of drop than this one? Has to be 2 1/2 inch receiver. # EQ90-02-4900. | We do carry a Curt weight distribution shank that offers 2 more inches of drop than the Equal-i-zer shank...

Will this work with weight distributing hitch | For an adjustable shank for a weight distribution system and a 2-1/2 inch hitch. For that we have the part # EQ90-02-4900 which can do a drop of up to 6 inches and a rise of 10 inches. |

Hello i have a 2018 jeep grand Cherokee can i use stabilizer / equalizer bars with my jeep grand Cherokee to pull a trailer even through its a uni-body frame?? | The best place to verify whether or not a weight distribution (WD) system can...

Hi I currently have a 10000 lb rated equalizer hitch to tow a 7800 lb trailer. We are selling the larger trailer and buying a smaller 4500 lb 5600 lb loaded trailer. Tongue weight 550 lbs. Is our current hitch going to be too stiff for the...

I have a 2019 Ram 2500 4x4 w Off Road package. I recently purchased a preowned Arctic Fox 25Y trailer which came with an E2 equalizer Round Bar sway control hitch. It also came with a standard 2” shank. First problem, Truck receiver shank...

I have a 2019 Silverado crew cab 4x4 long bed 3500 HD and a 2020 KZ sportsman LE 333 KBKLE travel I’m inquiring a weight distribution hitch system | Choosing a weight distribution hitch should be done using the tongue weight of your trailrer;...

I currently own a Equalizer 10,000/1,000 lb. W/D hitch and like it very much. I upgraded to a larger trailer and my tongue weight is now about 1,400 lbs. My question is, can I upgrade my spring bars to the 1,400 lb. version with my current Equalizer...