Will the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole Fit the 1986 F 350 Super Cab
The wireing is already ford standard for a pull trailer. Looks like a nice design. | If your 1986 F-350 has the round style plug that attaches the vehicle wiring to the 7-Way connector on the rear of the truck, like the one on the Tow Ready...
Tools Needed to Install Draw-Tite Trailer Hitch 75038 on a 1988 Ford F-150
i need to make sure this hitch will fit and what is required to install , i am getting up in years. | The Draw-Tite trailer hitch # 75038 does fit a 1988 Ford F-150 with a standard or step bumper. I have included a link to a video to the right...
Recommended Trailer Hitch Receiver For Deep Drop Bumper On 1990 Ford F250 XLT Lariat
I have tried to measure underneath my grandpas truck but cant get a good reading because of the spare tire. I think that i have gotten 36.5 inches but dont know if it is correct. His birthday is coming so i dont want to ask for the pad lock...
Troubleshooting Draw-Tite Activator Trailer Brake Controller that is Draining Trucks Battery
6 pole socket shows power on at brake controller output and ground? Any Ideas | It's normal for a brake controller to send some power back to your 6-way in order to check if a trailer is connected but it should never be enough to drain your...
When Should the TorkLift SuperHitch Original Trailer Hitch Receiver Be Used on a 1987 Ford F-250
Is the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2inch Receivers - TLF1000inch my best option for a heavy duty hitch for everyday use, but will eventually put a camper on the truck? I would also like...
Trailer Hitch Receiver Recommendation and Wiring For a 1990 Ford F-350 Ambulance
I just picked up a 1990 Ford F-350 Ambulance. I’m looking to get a rear hitch, do you have anything that’d fit? | For your 1990 Ford F-350 Ambulance I recommend the Curt Trailer Hitch Receiver # C14082. This receiver is specifically designed...
5th Wheel Hitch, Base Rails and Install Kit for 1989 Ford F-150
Im getting a 5th wheel hitch with curt 16104 rails, what installation kit would I need for an 89 ford f150 8ft bed. Thanks | We have the Curt Universal Fifth Wheel Base Rails with Installation Kit # C16200 as there are no custom brackets available...
Tailgate Assist Recommendation for 1989 Ford F-350
I am looking for a tail gate assist to fit my 1989 ford F 350 lariat dual wheel truck, will this fit? is it durable or how often does this unit good for, thank you for you time. | For your 1989 Ford F-350 we have the Hopkins EasyLift part...
Will Brophy Camper Tie Downs # TDSF Fit on 1989 Ford Full-Sized Truck
will the tiedowns fit on my ford truck it is a full size truck | The Brophy Camper Tie Down # TDSF is a compatible fit for your 1989 Ford F-150/F-250/F-350 full size truck and will fit most campers up to 8 feet in length. I have included a link...
Installing Trailer Brake Controller on a 2006 Ford F-150 with Factory Installed Brake Controller
I am about to remove my 06 Ford PU oem brake control and install the Prodigy 2 that I purchased from you last week. The oem brake control has two plug- ins at the rear. Do I remove both plug-ins? | According to our FAQ, which I have linked for...
compatible Rear Bumper and Installation Kit for a 1990 Ford F-250
I have a 1990 Ford F250 XLT Lariat Extended Cab 2 Door and Ad States I Will need The Mounting Kit, Can You Provide Part Number? | We have a rear bumper that will fit your 1990 Ford F-250 truck, but the Westin # 76001 that you referenced will...
Mount Kit to Install Detail K2 Rampage II Snowplow on 1990 Ford F-250
what mount do i need for an 1990 ford f250 | The mount kit you need to use the Detail K2 Summit II Snowplow # K2SUMM8826 on your 1990 Ford F-250 is the part # K281516 which is a custom fit for your truck's frame designed for mounting this plow. |
Buyers Products Gooseneck Safety Chain U-Bolt Kit Dimensions
How long are these u bolts I have a 1 inch plate under my bed I want to make sure they are long enough | The Buyers Products Gooseneck Safety Chain U Bolt Kit # 337BRB03 has an overall length of 5-5/8 inches and a length of 4-3/4 inches that...
Tool Box Recommendation for a 1988 Ford F-250
How do you compare this product with the Deflectashield Challenger crossover box for value? Will this fit my 1988 F-250? Thank you | I did a little research on Deflecta-Shield Aluminum Products tool boxes and found that share many of the same...
Available Tail Gate Lift Assist for 1990 Ford F-250 XLT Lariat
I need a1990 FORD F250 XLT Lariat tailgate assist kit. Torsion bar OR hydraulic cylinder? which is best and why? do you have them for my truck? Respectfully | Each type of lift assist would have its' own benefits and drawbacks, so it's hard...
What is Material of K-Source Replacement Side Mirror KSH3661 Made Of
Are the mirror heads made of ABS or metal? | The mirror housing of the K-Source Replacement Side Mirror # KSH3661 that you mentioned is made of a plastic with a chrome finish. |
Does Curt 14001 Fit A 1989 Ford F-150
Does this hitch fit a short wheel base 1989 F150 2 wheel drive pickup? | Yes, based on your information the Curt Trailer Hitch Receiver, Item # 14001, is a confirmed fit for your 1989 Ford F-150 if you have a standard or step bumper. It has...
What is the Weight Capacity of the 100 Series 5th Wheel Tailgate for a 1987 Ford F-150
I have a 1987 F-150 that needs a new tailgate. Can the vg-100 handle the weight of someone standing on it when it is down? I ask because when I pick up a load of hay the guys always jump down on to the tailgate from the hay stacks. Thats why...
Where to Connect the Brake Light Switch Wire on a 1986 Ford F-150 When Installing Brake Controller
First I understand all the wiring and where everything goes. A supplemental sheet was included with the controller. It states inch Ford added a wire on late model Trucks etc...starting in 1998 on some vehicle. The wire is red with a green...
How to Install Erickson Retractable Anchors EM01003 in F-150 with Factory Bed Liner
Can this anchor be installed in the stake slot from above, without having to access it from below?...the factory bedliner is already installed in my 86 F150. Thanks | The Erickson Retractable Tie-Down Anchors # EM01003 do install in your F-150...
Fit of Westin 2000-92230 Diamondstep Rear Replacement Bumper w/Custom Install Kit on 1990 Ford F-150
how confident are you that a 20000-92230 will fit my 1990 Ford XLT-250 Lariat? Will it fit using your bumper kit that is supplied or should I expect to drill new holes? | I've confirmed with my Westin representative that their # 20000-92230...
Recommended Chrome Rear Bumper for a 1988 Ford F-250
Hi I have a 1988 custom ford f250. I would like to purchase a chrome rear bumper. Will the bumper fit without the added purchase of brackets or must I purchase that as well. thanks | We have a chrome plated rear bumper that is a confirmed...
Recommended Trailer Hitch Receiver For 1990 Ford F-150 XLT Lariat
I have a stock, all original 1990 Ford F-150 XLT Lariat with the stock chrome bumper and stock/original spare tire mounted under bed. . Id like to add a receiver hitch. I did a search and most say wont fit this or that. Not sure if my truck...
Gooseneck Hitch and Install Kit for 1986 Ford F350
Which Gooseneck Hitch for a 1986 Ford F350 Long Bed? | According to Curt, the proper Quick Goose 2 Gooseneck Hitch and Installation Rail Kit for your 1986 Ford F350 is part # C630-636. This hitch fits models with or without overload springs...
Filter Your Search
Contact and Help