!Cherokee Alpha Wolf Travel Trailer  x   >   !Park Lane  x   >   !Paneloc  x   >   Weekend Warrior  x   >  

Looking buying E-Z Flex Triple Axle Suspension Kit with 7-3/4inch Equalizers Item # K71-657-00 for my triple axle 2007 weekend warrior fsw3200. Beyond my 7 3/4 spacing measurement what else do I need to check to see if this kit will work for...

I have a 2007 Weekend Warrior FS2600. A bearing went out and it gouged up the spindle pretty bad. I smoothed it out with a grinder and it got me home but there is a little play between the inner race of the bearing and the spindle. So I think...

Hello I am looking on replacing the landing gear on my fifth wheel trailer. The stock single gears are working extra hard to get the job done, and sometimes unable to perform. Looking for the best option for replacing it with one of your dual...

What is the overall length of the connector and, how far is the inside depth to the stop? | The Replacement Camlock Connector for Lippert Waste Master # LC360578 measures roughly 4-3/8 inches and about 2-1/4 inches to the stop. Please note that...

Need front landing gear for a 2008 weekend warrior cr3905 fifth wheel | For a powered landing gear set that would fit your 2008 Weekend Warrior CR3905 we have the Stromberg Carlson part # LG-1 that would fit easy and work great. This has an...

I have a 2007 weekend warrior fsc3200 with a G10-3e hot water heater that I need a replacement for. | I recommend the Furrion RV Tankless Water Heater 60,000 BTU # FR98SR. This unit features a heating capacity of 13,000 - 60,000 Btu, well above...

Hi. I just bought a 2008 FSW2800 weekend warrior. I would like to change the old shackles and purchase a shackle kit. Not sure what to purchase. 3 axle trailer | Alfredo, to pick out the correct replacement shackle kit for your Weekend...

Your lead landing gear part number LG 17901 3 is the right measurements that matches my 2006 weekend warrior. My question is my Jack does not use the factory welded on mounts on my trailer they welded on to Flat plates and thats what holds it...

Will the k71-360-00 fit on a 2008 weekend warrior 30fs with triple axels, spacing is currently 35”? | Yes, the Heavy Duty Equalizer Suspension Kit part # K71-360-00 does fit your 2008 Weekend Warrior 300FS that has a triple axle setup and a...

Looking for 4 stack double eye leaf spring 6000 lb. Do you know what length fits a 2007 Weekend Warrior LE 3150 5th wheel | We do not have a way to determine what length springs you have/need. You'd have to measure what you have now and get...

replacing leaf spring assembly on the suspensiion with a PR-4 spring assembly would that work or do I need a special 4 leaf spring assembly The only difference is that measurement of the complete 4 leafs from top to base is on the PR 4 is 1...

i have a 2007 FS2500 WEEKEND WARRIOR and wanted to know which size of bearing and race i would need so when i replace my brakes i could install new bearing. i just order 2 set of brakes from etrailer. thanks for time | I really wish I knew...

Can u guide me into what leaf springs I would need to buy for my 2007 FB 2600 Weekend Warrior Toy hauler | To find the correct replacement leaf springs for your 2007 Weekend Warrior 2600FB you will need your axle capacity as well as the length...

I have a 50 amp service on my toy hauler and the park I’m going too has a 30 service I have a 30 amp adapter to accommodate our power needs ”what size surge protection would I need” ? | When it comes to surge protectors you'll also choose one...

What size magnet for trailer brakes on my 2007 weekend warrior fs23 use | It looks like your 2007 Weekend Warrior FS23 has a GVWR of 7,650 lbs so it likely has dual 3,500 lb axles. This means you'll need a brake magnet for 10" brake assemblies. For...

Hi, I currently do not have an awning on my trailer. Does the Solera Smart Arm 12V Power RV Awning - 18 Wide - Programmable - Black Fade Item # LC517505 include all hardware for mounting to the trailer? Thank you, | Great question. The Solera...

2006 Weekend Warrior LE 3105 Needs new landing jacks Please provide parts information | Manufacturers do not provide the part numbers for the landing gears they install on their products so this will require you to do some measuring before we...

We’d like to install in our toy hauler but would want to remove base while camping. Would this be easily removed and reinstalled? | The B&W Biker Bar Motorcycle Tie-Down Systems like the part # BWMC2304 that you referenced are designed for a...