Instruction Manual Needed for a Tekonsha 2016 Hydraulic Brake Controller On a 1986 Ford F-250
do you have instruction manual for older model 2016 tekonsha brake controller? also wiring diagram for truck to trailer thank you for your time! | The wiring diagram for wiring your truck to your trailer can be found on our wiring page (see...
Recommended Trailer Hitch Receiver for 1965 Ford F100
I have a 1965 ford f100 p/u it is a step-side with the plain straight bumper. Which hitch do I need? Thanks | For your 1965 Ford F100, I recommend the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41001. This hitch receiver is a 2 inch Class...
How To Convert Vacuum Over Hydraulic Trailer Brakes to Electric Over Hydraulic Trailer Brakes
Hello there. I am currently running a vacuum over hydraulic brake setup on a 1977 F350 and gooseneck. I have just updated to a 2015 Dual Cab Iveco Daily which has an electric brake system already installed by the previous owner. On the gooseneck/...
Replacement Regulator For Marshall Brass Co 240 Regulator
whats the btu rating for the marshall brass co. model 240? I would like to upgrade to an auto change over regulator. Thank you! | The Camco Automatic Changeover part # CAM59005 will replace your marshall brass co model 240 without a problem....
Availability of a Trailer Hitch For a 1966 Ford F-100
Would this hitch fit behind a tag on a 66 Ford F-100? | We do have hitches available for your truck (see link) but none of them are designed to fit behind the tag (license plate). At this time I do not know of a Hidden or Stealth hitch that...
Can an RV Hitch # 5350 be Installed on a 1972 Ford F-100 with No Rear Bumper
im trying to find a hitch for my 1972 f100, i removed my rear bumper so im looking for a hitch with minimal that tucks up tight to the frame and is 34inch wide to fit the frame rails. will this hitch be safe to use for what i am talking about,?...
Parts Needed to Install a Trailer Brake Controller on a 1979 Ford F-350
Will this fit a 79 f350 and whatwiring harness do i need ? I have a 6 pole on there now and will be switching to a 7 any suggestions | Since you already have some trailer wiring on the 1979 Ford F-350, all you will need is a brake controller...
Brake Controller Installation for 1991 Ford E-350 Van Towing an 18 Foot Trailer
I have just bought a 18 ft trailer to pull my small John Deere 2300 . The trailer has electric brakes on two wheels . Do I need to install a brake controller ? If so what kind would you recommennd . If not What is required to make the brakes...
Replacement Trailer Hitch Receiver Hardware
Can I reuse trailer hitch bolts? I just bought a hitch from you guys and installed it a few weeks ago. I need to take it off to get to something. I haven’t towed anything yet but they are torqued down. | You cannot reuse hardware for a trailer...
Brake Controller Light Flashes When I Turn on My Emergency Flashers on a 1991 Ford F-350
I just obtained a 1991 Ford F-350 7.3L Deisel and ond day I tryed the emergency flashers and noticed that the light on the brake control was blinking with the flasher. What is going on? | This is a common problem on older vehicles. With the...
Trailer Hitch Receiver and Brake Controller Recommendations for 1977 Ford F-150 4X4
Im looking for a trailer hitch and brake controller for my 1977 F150 4x4, 400 engine, automatic and Im not sure the gear ratio. I am not sure how much weight it can tow. I was thinking it should be able to tow 6000. What hitch would you recommend?...
How to Tow a Trailer with Vacuum Over Hydraulic Brakes
Hi team i am presently running a 1977 F350 towing a 28foot gooseneck with vacuum over hydraulic brakes. I am looking at a 2015 Iveco dual cab which is fitted with an electric brake system by the previous owner who had a 30foot 5th wheeler. I...
RV Door Striker Plate that is 3-7/8 inch Long by 1-1/4 inch Wide
I need a striker plate for a door that measures 3 1/4 L x 1 1/2 w Can you recomend something that will work? it is sliver and looks like fastec 6000-10 but is 1 too short. | I wish we had something that was close to what you need but I checked...
Curt Gooseneck Flat Plate Installation Weight Capacity
Hello, Can I bolt this flat plate to the top of the frame? What is it rated by itself? Thanks Can this product pull a trailer with just the 6 grade 5 bolts? | Curt says the Gooseneck Flat Plate # C65500 can be installed to the frame rails...
Fifth Wheel Hitch and Installation Kit for 1976 Ford F250 Long Bed
I own a 1976 F250 Super Cab / Camper Special LB with a 4 speed transmission, 8100 # GVW and was wondering what kind of recommendation you might have for mounting a fifth wheel hitch on this truck. And perhaps even one to sell so I might be...
Will Dexstar Conventional Steel Wheel With Offset Item # AM20504 Work With 1979 Ford F-150
I know that you cannot recommend this wheel for a vehicle but will this wheel Item # AM20504 fit on a 1979 Ford F-150, custom super cab pickup? Its a 2 wheel drive truck with a stock 5 bolt pattern wheel. I like these wheels and would like...
Can a Proportional Brake Controller be Used on a 1971 Ford F-250?
I am wondering if this unit has the inertia components that would be necessary to install it on a vehicle that does not have any computer or electronic braking components. I have a 2016 fifth wheel that has electric brakes and Id like to be...
Recommended Truck Bed Mat For A 1966 Ford F-100
Do you carry bed mats for a 1966 F100 long bed | While we don't carry any custom-fit options for a 1966 Ford F-100 we do offer universal-fit options like the DeeZee Universal Utility Mat for Trucks and Trailers # DZ85005. DeeZee also offers...
Can Atwood Air Command RV AC Units Replace Dometic Penguin Heat Pumps on 2004 Alpine Coach
I have a 2004 Alpine Coach. It has 2 Dometic penguin heat pumps. The climate control center has 5 buttons, and it also controls the furnace. This is a ducted system with return on the ceiling kit and ducts running fore and aft. I would like...
Recommended Toolbox For A 1979 Ford F-150 With A Pace Edwards Full-Metal Jackrabbit Tonneau Cover
Just looking for tool box options that fit. | The average bedrail height for Ford F-150's is approximately 21", so going off of that measurement and allowing for your Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover # 311-FEF1290...
Trailer Hitch for a Champion Crusader Shuttle Bus
Need hitch 42 inch from frail to frail rail Body is crusader shuttle bus | For a Crusader Shuttle Bus, there is not a custom-fitted hitch, so a universal hitch will be the way to go. A good weld-on hitch is the Class V Curt, part # 15901. This...
Receiver and Weight Distribution Hitch Recommendation for 1968 Ford F-250
I have a 1968 Ford F250. With a Heavy duty bumper that attaches to the Frame in multiple spots.I have a ball hitch on the bumper. I have a 20 foot 1950 Airstream trailer that is 3500 lbs. I would like to use a weight distribution bar but I cannot...
Where Does the 1/2" Bracket Strap on Firestone Air Bags for 1965 Ford F-350 Go
I have a 1999 7.3 f350 with 1 overload spring. Does the lower mount ,using the 7inch bolt , mont to the overload spring or the whole spring pack? It says both ways. | In regards to the Firestone Ride-Rite Air Helper Springs part # F2071 on a...
Fifth Wheel Installation Kit Under Bed Brackets and Hardware for a 1979 Ford F-150 and Trail Boss
I have an older Trail Boss hitch and rails. What I need to know is this the kit I would need to mount it into my Ford F150 Custom. And also if this is all I would need. Thank you for any help info. | For your 1979 Ford F-150 and Trail Boss 5th...
Filter Your Search
Contact and Help