Is RV Trailer Hitch Available with 10,000 lb Weight Capacity
You recommend the #5350. What would you recommend if I was looking for closer to 10,000 load hitch? | If you are looking for a trailer hitch to mount on your RV then the highest rated capacity is the Curt Trailer Hitches parts # C13702 and #...
Recommendation for an Oil Filter Adapter for Installing an Oil Cooler on a 2006 Pontiac GTO
Will this fit a 2006 Pontiac GTO? Can you recommend a smaller in height oil filter that could work with this? | The low profile sandwich adapter, item # D25771, is 1 inch thick. If you know the thread pattern on your engine oil filter the 13/16-16...
LCI Trailer Stabilizer Jack Motor and Switch Replacement
I am wondering if I can get just the motor and the rocker switch for this jack. If so, please let me know the part numbers. Thanks, | Yes, the replacement motor you need is the part # LC352338 and then for a replacement rocker switch you'd...
Derale Oil Filter Relocation Kits For a 1965 Pontiac GTO With 389 Cubic Inch Engine
I am wondering if the Derale Oil Filter Relocation Kit for Multiple Engine Thread Sizes will fit a 389 Pontiac engine? | Yes, the Derale Oil Filter Relocation Kit # D15748 will fit your 1965 Pontiac GTO with the 389ci engine. Your oil filter...
Does Air Lift Vehicle Air Bag Kit for the 1967 Pontiac GTO # AL60844 Provide Lift in Ride Height
Do these inside the spring air bags raise the veh. in the rear up to 3 in. if desired ? Thanks inch air lift 1000 drag bags | The Air Lift Vehicle Suspension Kit for the 1967 Pontiac GTO, part # AL60844, is a correct fit for the 1967 GTO (as...
Roof Rack Recommendation for a 2005 Pontiac GTO
Is there a roof rack that will fit a 2 door 2005 Pontiac GTO? I have requested this before and did not receive a reply. Thank you. | You have one roof rack option for your 2005 Pontiac GTO, an Inno kit consisting of: Square Crossbars, 50 inches,...
Can Replacement Awning Fabric Be Secured With Screws Instead of Rivets
When replacing the awning fabric the ends on my powered awning are held in by rivets rather than screws. Should I drill out the rivet and replace with screws since I don't have a rivet tool? | Yes, you can remove the rivets and use some self...
Option for Securing E-Track to Floor Of Car Hauler
How do you secure the e track to floor for hauling a car | I'd use 1/4 inch diameter lag bolts whose length is a bit more than the thickness of the floor. How many bolts you need would depend on what you're using the E-track for. I'd probably...
Filter Your Search
Contact and Help