!Cherokee Alpha Wolf Travel Trailer  x   >   !Integra  x   >   !XC70  x   >   Workhorse  x   >  

Kwikee Series 25. I am removing my old worn out steps[902308000] and replacing them with a newer set.[902509000]. Hopefully this is a direct plug and play exchange. My question is, will this work with my old door sensor switch? Present switch...

I have a 2004 Monaco Monarc Class A RV. What sizelength valve tire extensions do I need for inside tire ? Can I get just the extensions as there is already a mount on the hub. Thankyou | For your 2004 Monaco Monarco Class A RV you will need...

How much height do snap pads add to the lift ? Will they take the wheels off the ground when the jacks are fully extended ? | The bottom portion of the SnapPad Jack Pads # SP54FR2 are approximately 1" thick but they are not meant to lift your...

I need to have over 20ft of Gas line from my Propane on drivers side, just behind driver, to the opposite side of the Class A, 12ft will just get me over to the other side, but the grill needs to be a little further away from the Motorhome....

I have a 2011 Thor Serrano class A with the workhorse chassis gvwr 20500# w-20 or w-22. I may Carrie a motorcycle on the back so another 600# of weight. Which sumo springs are best for my RV. How tall are springs. If they fit my RV can I order...

Is this the correct model for a 2003 Pace Arrow model 35G with a Workhorse chassis | Yes, the Roadmaster Reflex Steering Stabilizer part # RM-RBK13-RSSA that you referenced has been designed to fit the Workhorse W-22 chassis you have on your...

looking at the GVCWR on the motorhome it looks like it will be able to tow my trailer, but i cannot find a hitch with an 8000# rating for it. my trailer loaded weighs 7000# | From what I could find, your 2004 Safari Simba 34SBD will be rated...

I am looking to replace a damaged Valley Industries V5 5000# hitch on a 2006 Itasca Suncruiser 38Tfoot on a Workhorse 24 chassis. The existing hitch receiver is approximately 40inch overall width, and approximately 36inch centered on mounting...

Im about to order Sumos for the front axle of my 2009 Workhorse W-22. I want to make sure this is the correct part # and if they automatically come as a pair I only need to one as my order quantity. | The correct SumoSprings Solo Custom Helper...

I own a 2006 national dolphin 5355 on the W22 workhorse. Currently my rv has serious sway issues even though the original owner installed: Safety Plus anti sway Safety plus shocks Davis tru-trac Steer safe anti sway It all is at least 10 years...

Is the picture of the end cap I am sending the same as your 8539 CP? | The Replacement Plastic Endcap for Ladder Rung on Stromberg Carlson RV Ladder # 8539-CP does not appear to be the same as the one in your picture. Your picture shows a screw...

2005 w-22 , Have the SSF-280-47 SumoSprings Front Solo for Workhorse W20/W22/W24 . Looking at the Timbren Kit for Workhorse P42, W20, W22? I here they are larger and give more spring? If not might add the air lift front bags. Have new Konies...

I have a 2008 Winnebago UFO R26 will item RM-RBK4-RSSA fit? | The correct Roadmaster Reflex Steering Stabilizer with Mounting Brackets for a Workhorse R-Series Chassis (UFO R26) is part # RM-RBK13-RSSA. |

The original steps are Coach Step sn 00162.Part number is 725-0042. The step framework is approximatel 23 and three quarters x 11 and a half, Mounting holes are about 7 and three quarters center to center. The from top step to bottom step is...

Disappointed to see roadmaster front trac bar for my 2003 w22 is made in China. Do you offer a product made in USA? | The Roadmaster TruTrac Front-Axle Trac Rod for Large Trucks and RVs # RM-TRACW-22 is manufactured in-house at Roadmaster's...

2004 workhorse chassis w 22. Looking for a front mount receiver hitch. What options do you have? | For your 2004 Workhorse W22 chassis there isn't a specific custom front mounted hitch receiver. Because of that, I recommend using the Adjustable...

Hi, Getting ready to buy equipment, want to confirm accuracy. I have 2000 Fleetwood Flair 25Y on a P32 Series Workhorse chassis. I would like confirmation of the Front Anti-Sway bar. | The correct Roadmaster Front Anti-Sway Bar and Bushing Kit...

I have a 2004 workhorse p32, which comes with a stock OEM steering damper up front - parallel to the frame rails. Is this rm-rsscp30 a replacement for that stock bilstein shock, or is it an additional unit that connects to the tie rods? If...

Hi, can you advise me correct model front and rear sway bars for a 2005 Fleetwood Bounder 34F built on a Workhorse W22 chassis? Many thanks, | Yes I can! For a front sway bar to fit your 2005 Fleetwood Bounder 34F built on a Workhorse W22...

I have a 2003 itasca suncruiser 35U with the workhorse chassis I think W-22 and was wondering which is correct part number for Roadmaster rear sway bar | For that model year, Roadmaster offers a few different fits, but I was unable to confirm...

basekit plate tow bar,magnetic lights,is a braking required?the towed vehicle weighs 22oolb,how does a surge brake operate? | First let's get you set up with a base plate kit. The Blue Ox # BX1722 is the custom fit base plate kit for your...

Do you sell single covers rather than the set? | Currently the Replacement Center Cap # NA9130 is the only part that is separate from the Namsco Wheel Liners # NA226H40N for your Workhorse Chassis. |

What is the weight of the HLY64FR? I have a Class A motorhome with a 5K lbs hitch and plan on buying two E-bikes with a step thru style. Which bike rack should I buy HLY84FR or the HLY64FR RV? Can you compare the two racks for me. | The...

What hardware comes with the DOM87FR full time toilet. What else will i need to replace the toilet i have in my motorhome. 2007 Winnebago adventure I have measured and it appears that it will fit. Thanks | The Dometic Full-Timer RV Toilet...