Which Harness do I Need For My 2004 Ford Ranger
I have tried to find which harness I need for my 2004 Ford Ranger, Edge, RWD, 3.0 which has a tow package and a 4 pin connector. I will be pulling a trailer that has a 7 pin oval connector, but your directions on your website are very confusing....
Will the RoadActive Suspension Custom Leaf Spring Enhancement Kit Fit My 2024 Ford Ranger Raptor?
Hello, I have 2024 Ford Ranger Raptor and was wondering if this would fit since i have the raptor? Part RAS29VR. Was also wondering if they have air bags instead. I have a trailer that’s 4,500 pounds that i haul and I’m looking to get more stability...
Does Curt 7-Way Wiring Harness Fit 2019 Ford Ranger
Hi, I have a 2019 ford ranger want to install a trailer tow but my vehicle dont have the trailer tow module installed. I am going to install a trailer tow module, will this harness C56431 are compatible with my trailer tow module. I check the...
Recommended 7-Way Trailer Wiring Harness For 2011 Ford Ranger With Factory 4-Way
I have a 2011 Ford Ranger that has a light towing package with a 4 pin trailer wiring harness. I am picking up a new trailer that has a 7 pin blade wiring harness. Is there an adapter that I can plug into the 4 pin on my truck and hook up the...
Curt Echo In-Line & Trailer Connected Message on 2019 Ford Ranger When One Is Not
I purchased this controller recently Order #114272079 and installed it on my 2019 Ford Ranger Lariat with the factory tow package last night. It controls my trailer brakes fine and functions properly with the trailer connected. My problem is...
Recommended Trailer Wiring Harness For 2007 Ford Ranger
I have a 2007 Ford Ranger with a 4 pin for my trailer lights. However, I just got a tear trailer and it comes with a round, 7 pin female end. What part do I need? Thank you | If the trailer you are towing has brakes you will need a brake...
Troubleshooting Broken Ground Pin on Trailer Wiring Harness for a 1994 Ford Ranger
Do they make a better harness than what is displayed on your web site. The ground post keeps breaking off, which I know how to bypass the plug to make it work. The other problem Im having is one of the turn signals will quit working. I will...
Will Lucas Oil Marine Grease Work with Curt RockerBall Shock Absorbing 2" Hitch Ball
Curt rockerball instructions says to use Molly grease to lube ball before use, can I use Lucas oil marine grease instead? | The Curt RockerBall Shock Absorbing 2" Hitch Ball part # C40047 per the instructions requires a high-quality molybdenum-based...
Daily Maintenance of SaltDogg Salt Spreader
Im trying to find out how or what to use to clean the entire unit after completing each use? | For your SaltDogg # 337SHPE1000 Salt Spreader it is recommended that you wash (with water) the spreader after every use to make sure no material is...
Converting Wiring On 1998 Ford Ranger From 4-way To 7-Way For Trailer
How can I convert this so it works properly. I have a 1998 ford ranger and it has a 4-way round connector. I can easily rewire a flat connector being most converters I see have that. Will everything work properly? The trailer is a 1984 Mallard...
No Trailer Connection Error Message w/ Tekonsha P3 Brake Controller on 2010 Ford Ranger
i keep getting no trailer connected it was working fine checked wiring and all is ok i own a ford ranger 2010 | There are a few things I would recommend checking that could be causing the No Trailer Connected error code on your Tekonsha P3 #...
Recommended Wiring Harness For A 2023 Ford Ranger
I am in need of a vehicle wiring harness for my 2023 Ford Ranger. I would like a 7 way plug if possible. | When installing trailer wiring on your 2023 Ford Ranger I recommend the Curt T-Connector Vehicle Wiring Harness # C56431. The Curt harness...
Can RAS and Timbrens Be Used Together On a 2011 Ford Ranger
2011 Ford Ranger XLT 2WD, 4.0 V6, w/ ARE fiberglass cap, 55K miles. I already installed the RAS system last week. However, in my long wait for that suspension upgrade I also ordered the Timbren part # TFRR050A. So my question is this. Is using...
Trailer Hitch For A 2002 Ford Ranger With Step Side Bed
My 2002 ranger has the step side bed, will this still fit? Having a hard time finding fitment specs for the step side beds. | Yes, The Curt Trailer Hitch Receiver # 13138 is confirmed to fit your 2002 Ford Ranger with step side bed. The trailer...
Suspension Enhancement Recommendation for 2002 Ford Ranger
I need advise on setting up my 2002 Ford Ranger 2WD, 3liter engine, for a better suspension for Towing a Trailer. What do you recommend for Air Bags and other changes that are adjustable for a better Towing suspension upgrade. Thanks. | The...
Troubleshooting Lighting Issue on Boat Trailer Towed by 2004 Ford Ranger
I bought a boat trailer that has a new wiring harness four pin. I have a pre-wired 2004 Ford Ranger. After messing around with it, I bought a plug in tester. On the truck, when the parking lights are off, both directional signals tester flash....
How Do I Install A Mounting Bracket To A 7-Way Harness That Does Not Have A Removable Connector?
How do I get the harness through the Curt bracket? I assume I have to take the plug apart? How? | There are screws on the back of the TorkLift Wiring Harness Extension # TLW6021 as you can see in the photo that I included. You will need to loosen...
Troubleshooting Trailer Lights Not Working When Connected To 1994 Ford Ranger That Work With F-150
Had a buddy hook his Ford F150 up my 10foot cargo trailer, everything worked great. My Ranger when hooked up...trailer...no blinkers, tail lights work only very intermittently. My regular auto mechanic said truck plug tested as good??? 1994...
Trailer-Side Plug Not Fitting Curt Echo When Used on 2020 Ford Ranger
We tried hooking up our echo wireless brake controller this afternoon but could not get the trailers plug to fit into the controller. It fits in the Ford Rangers 7 way pin but when we went to the trailers plug it would not go in at all. Sad...
Filter Your Search
Contact and Help