EZ Flex Equalizer Replacement Recommendation for Trailer With TREQ458 Equalizers
Im trying to upgrade the equalizers on my trandem boat trailer - Looking at K71-652-00. I believe my center bolt is 3/4inch but it seems like the ez-flex equalizers center bolt is 9/16. Can i make it 3/4 by taking out the center silver bushing...
Replacement Grease Cap Rubber Plug and Tips on Driving In Dust Caps/Bearing Protectors
Can you get another one of these? Mine is cracked the rubber plug and so it leaks a bit. The cap itself seems fine, and I cannot get a set of bearing buddies on the hub at all I got a set for 1.98inch hub diameter grease cap size and they will...
Spindle Washer Needed For 2000 LB Axle With Standard Spindle
I didnt realize this axle did not come with the spindle washer. What size washer do I need? | The washer that would fit the Dexter Trailer Axle Beam with Standard Spindles, part # T20BTR-7258, is part # SW1000. This has a 1 inch inside diameter. I...
Replacement Spring Seats for a 2,000 Pound Trailer Axle
I think I know my answer based on the QandA, but I want to ask directly before I buy. I have a 4x8 folding utility trailer. The width of the trailer is 48, the center of each spring where the nut is is 46.5inch and the existing axle is 56inch...
Replacement Trailer Hub Seal for 12194TC TCM
Do you carry this seal or one compatible12194tc tcm oil seal 1.25inch id x 1.979inch od x .406inch wide | We've got one that is close enough I am more than confident it will fit. It is the Double Lip Grease Seal item # 34823 you were looking...
Recommended Trailer Hubs For The Timbren Axle-Less Trailer Suspension # ASR2000S01
I currently have a old leaf spring suspension that had a near catastrophic failure. Ultimately the 4-on-4 13 wheel hub needs to be replaced. I recently picked up a used 2000 lb rated Timbren Axle less suspension spindle only. I have two options...
Trailer Hub Grease Seals Need to be Greased before Install
Grease seal issue. Should a new seal have grease placed on the rubber at installation onto axle spindle? Also, I presume the outer races should NOT have lubricant placed on the outer edge when installing into hub? | It is not required to...
Filter Your Search
Contact and Help