GMC  x   >   Yukon  x   >   1999  x   >  

What adapter is needed to install a brake controller in a 1999 GMC Yukon. | For your 1999 GMC Yukon to install a brake controller you will have to do a hard wire installation to connect your brake controller. Unfortunately there is not a quick...

I need to install a brake controller and 7 way plug on 99 yukon SLT 4x4 which has a tow package. It has a pre-installed 4 flat plug on the rear near the receiver. Is it pre-wired for a controller or do i need to run all the wiring, find the...

This video is very good. The time and effort spent on showing where the tow-package-installed blue and redorange wires are is valuable. Thanks! I appreciate the time spent in the video showing us how to repeatedly use crimp-on connectors,however,...

i have a 1999 gmc yukon denali. i would like to install a new 7 prong adapter to the truck because the factory one is old and has broken prongs. i dont know which wire does what and im not too mechanically inclined to be able to find out without...

can not find the plug port under the dash anywhere, on my 99 yukon. | The 1999 GMC Yukon will not have a brake controller plug-in port under the dash. To install a brake controller on your vehicle you will need to hardwire the brake controller...

Is there an e-track or other way to mount this jack for storage ? Thanks. | Ram Scissor Stabilizer Jack # TJSC-24 is meant to be permanently attached to the bottom of a trailer or RV and used for stabilization purposes and not lifting. As such...

need more info on what is needed to mount the Detail K2 Storm II Elite Snowplow - Custom Mount - Electric Actuator - 84 x 22 on a 1999 GMC Yukon. We need to find out what bracket we need to put on the GMC. | To install and use the Detail K2...

Does this work off bluetooth and wifi? You mentioned wifi but not to many places out in the woods transmit wifi... Cool camera though. | The Rampage Camera part # RA7710 does not require a WIFI signal for use. The camera emits it's own WIFI...

I have a new Thule AeroBlade roof rack, and I would like locks for the feet. I already have a Thule roof box and bike carrier. I'd like to replace the locks on the carrier and box so they and the roof rack all have the same locks...is this possible? Thank...

does my 1999 gmc denali have a plase to plug in my brake controller | There is not a place under your dash for you to plug in a brake controller. You will need to use a brake controller 7-Way installation kit, part # ETBC7, in your 1999 GMC...

is there a place in the fuse block that u hook up a brake controller on a 99 yukon denali | When installing a brake controller such as the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on your 1999 GMC Yukon you will want to run...

Can you use this adapter in the rise position of the receiver? Tried to find an answer, didnt see one. | You can use the Reese Sway-Control Bracket # RP26003 on a ball mount in the rise position provided that when in the rise position the bracket...

How difficult is it to install on a 1999 Yukon? Does the product come with good directions? How many adapters are needed? Thanks. | The item you selected, Derale Radiator Adapter Fitting, part # D13018, is the adapter fitting needed for a...

Hi, Im trying to hook up a brake controler on a 1999 GMC Yukon. I have located the factory blue and orange wires going to the rear. Question is where can I pick up the brake switch feed with out removing the steering column to get at the brake...

Is there a under dash plugin for an electric brake controller on my 1999 GMC Yukon Denali? I have a Hopkins-Reliance brake controller with 4wire plug red black blue and white. It was prewired for a 7 wire harness which i installed aready but...

This is the vehicle and wiring I have, but the part number does not match the vehicle wiring colors on the vehicle look at Blue Chevy video and stop at 20 seconds Is this going to be a problem ? Curt C55319 | Since the color of wires can vary...

A trailer dealer says his trailer is Hideout 22RBWE 2012 Shipping weight 4840 Carring weight 2760 HITCH 600 Yukon max tow 7000 Hitch 500 Dealer said that with porper...

I have read where a 20 amp breaker is for 1-2 axles and 30 amp for 3-4. What if you tow both 2 and 3 axle trailers. Do you have to replace the fuse for different axles or is there a different setup or can you use a 30 amp for both? Thanks |...

I have 205 75r 15 tire whitch tire carrier should i use tr2 or tr1 | The only difference from the Bumper Mounted Tire Carrier, part # TR-1, and part # TR-2, is that part # TR-2 folds down to provide access to storage areas when mounted to your...

this car has the wiring installed and I have a trailer connector already installed round 7 wire. I have purchased a Primus brake controller but am having trouble finding the wires under the dash or under the hood to hook up to the controller....

Where can I access the cold side of the brake petal for the red wire to the controller? Is there another place to tap into, it’s near impossible to tap near the switch. Thanks | A dedicated brake switch circuit will be active at the third brake...

Have 99 gmc Yukon pulling a 32 ft rv tongue at 525 total weight 6950 truck squats bad.your enhanced suspension system looks good and so does weight distribution by curt.which would you recommend | To determine the correctly rated system for...

Hi. Can you tell me what type of mounting hardware is used, and how it is installed for Item # PLR9-SS ? Thank you. | Number 10 screws are what is designed to attach the Hook and Keeper # PLR9-SS to the the wall/door. You'll need a total...

Im about to replace my clutch fan with a electric fan on my 99 yukon. But I wanted to know which fan would be the best 1 to get a pusher or puller? And like what specs should I look for when purchasing? | Pushers are more efficient and more...